|
|
|
|
|
| |
|
|
| |
|
AFIX1FP1 |
MONO PROBE ROBOT PIN TOOL FIXTURE FOR 1 FP1 PIN, .457mm DIAMETER |
|
AFIX1FP3 |
MONO PROBE ROBOT PIN TOOL FIXTURE FOR 1 FP3 PIN, .787mm DIAMETER |
|
AFIX1FP4 |
MONO PROBE ROBOT PIN TOOL FIXTURE FOR 1 FP4 PIN, .914 mm DIAMETER |
|
AFIX1FP6 |
MONO PROBE ROBOT PIN TOOL FIXTURE FOR 1 FP6 OR FP PIN, 1.58mm DIAMETER |
|
AFIX1FP8 |
MONO PROBE ROBOT PIN TOOL FIXTURE FOR 1 FP8 PIN, .356mm DIAMETER |
|
AFIX1FP9 |
MONO PROBE ROBOT PIN TOOL FIXTURE FOR 1 FP9 PIN, .229mm DIAMETER |
|
AFIX24FP1 |
Manual / Robot pin tool fixture for 24 pin FP1 pins, 0.457mm diameter. |
|
AFIX24FP6 |
MANUAL/ROBOT 24 E-CLIP PIN FLOATING FIXTURE, INCLUDES JUST THE FLOAT
PLATES |
|
AFIX24FP6W |
TISSUE CULTURE WOUNDING PIN TOOL FIXTURE WITH 24 PAIRED HOLES FOR 24 FP
OR 24 FP6 PINS. PIN TOOL CAN BE USED ON ROBOTS OR MANUALLY. FLOAT
HOLES ARE ON 19.3 MM CENTERS AND PRECISELY 1.61 MM IN DIAMETER TO REGISTER
CLOSELY THE 1.58 MM DIAMETER PINS FOR STRAIGHT WOUNDS |
|
AFIX48FP6W |
TISSUE CULTURE WOUNDING PIN TOOL FIXTURE WITH 48 PAIRED HOLES FOR 48 FP
OR 48 FP6 PINS. PIN TOOL CAN BE USED ON ROBOTS OR MANUALLY. FLOAT
HOLES ARE ON 13.5 MM CENTERS AND PRECISELY 1.61 MM IN DIAMETER TO
REGISTER CLOSELY THE 1.58 MM DIAMETER PINS FOR STRAIGHT WOUNDS |
|
AFIX48FP13M |
MANUAL 48 E-CLIP PIN FLOATING REPLICATOR FIXTURE, (96 FORMAT) INCLUDES
JUST THE FLOAT PLATE, |
|
AFIX96FP |
MANUAL 96 E-CLIP PIN FLOATING REPLICATOR FIXTURE, INCLUDES JUST THE
FLOAT PLATE, |
|
AFIX96FP1 |
BASIC ROBOT PIN TOOL FIXTURE FOR 96 FP1 PINS, .457mm DIAMETER |
|
AFIX96FP3 |
BASIC ROBOT PIN TOOL FIXTURE FOR 96 FP3 PINS, .787mm DIAMETER |
|
AFIX96FP4 |
BASIC ROBOT PIN TOOL FIXTURE FOR 96 FP4 PINS, .910mm DIAMETER |
|
AFIX96FP6 |
BASIC ROBOT PIN TOOL FIXTURE FOR 96 FP6 PINS, 1.58mm DIAMETER |
|
AFIX96FP6W |
96 WOUNDING FLOATING FIXTURE FOR FP AND FP6 PINS |
|
AFIX96FP8 |
BASIC ROBOT PIN TOOL FIXTURE FOR 96 FP8 PINS, .356mm DIAMETER |
|
AFIX96FP9 |
BASIC ROBOT PIN TOOL FIXTURE FOR 96 FP9 PINS, .229mm DIAMETER |
|
AFIX96FP11 |
Basic Robot Pin Tool Floating Fixture For 96 FP11 Pins, 4.72mm Diameter
Pins |
|
AFIX96FP12 |
Basic Robot Pin Tool Fixture For 96 FP12 Pins, 2.36mm Diameter Pins |
|
AFIX96FP12M |
MANUAL 96 E-CLIP PIN FLOATING REPLICATOR FIXTURE, 2.36MM DIAMETER
INCLUDES JUST THE FLOAT PLATE, |
|
AFIX96FP13 |
Basic Robot Pin Tool Fixture For 96 FP13 Pins, 3.175mm (0.125") Diameter
Pins |
|
AFIX96FP13M |
MANUAL 96 E-CLIP PIN FLOATING REPLICATOR FIXTURE, 3.18MM DIAMETER
INCLUDES JUST THE FLOAT PLATE, |
|
AFIX384FP |
MANUAL 384 E-CLIP PIN FLOATING REPLICATOR FIXTURE, INCLUDES JUST THE
FLOAT PLATE, |
|
AFIX384FP1 |
BASIC ROBOT PIN TOOL FIXTURE FOR 384 FP1 PINS, .457mm DIAMETER |
|
AFIX384FP1TAP |
THE AUTOMATION PARTNERSHIP ROBOT PIN TOOL FIXTURE FOR 384 FP1 PINS,
.457mm DIAMETER WITH DOCKING FEATURE |
|
AFIX384FP3 |
BASIC ROBOT PIN TOOL FIXTURE FOR 384 FP3 PINS, .787mm DIAMETER |
|
AFIX384FP4 |
BASIC ROBOT PIN TOOL FIXTURE FOR 384 FP4 PINS, .910mm DIAMETER |
|
AFIX384FP6 |
BASIC ROBOT PIN TOOL FIXTURE FOR 384 FP6 PINS, 1.58mm DIAMETER |
|
AFIX384FP6W |
TISSUE CULTURE WOUNDING PIN TOOL FIXTURE WITH 384 PAIRED HOLES FOR 384
FP OR 384 FP6 PINS. PIN TOOL CAN BE USED ON ROBOTS OR MANUALLY. FLOAT
HOLES ARE ON 4.5 MM CENTERS AND PRECISELY 1.61 MM IN DIAMETER TO
REGISTER CLOSELY THE 1.58 MM DIAMETER PINS FOR STRAIGHT WOUNDS |
|
AFIX384FP8 |
BASIC ROBOT PIN TOOL FIXTURE FOR 384 FP8 PINS, .356mm DIAMETER |
|
AFIX384FP9 |
BASIC ROBOT PIN TOOL FIXTURE FOR 384 FP9 PINS, .229mm DIAMETER |
|
AFIX384FP12 |
BASIC ROBOT PIN TOOL FLOATING FIXTURE FOR 384 FP12 PINS, 2.36mm DIAMETER
PINS, NI-LUBE COATING. |
|
AFIX384FP1MD |
MOLECULAR DEVICES ROBOT PIN TOOL FIXTURE FOR 384 FP1 PINS, .457mm
DIAMETER |
|
AFIX384FP3MD |
MOLECULAR DEVICES ROBOT PIN TOOL FIXTURE FOR 384 FP3 PINS, .787mm
DIAMETER |
|
AFIX384FP9MD |
MOLECULAR DEVICES ROBOT PIN TOOL FIXTURE FOR 384 FP9 PINS, .229mm
DIAMETER |
|
AFIX1536FP1MD |
MOLECULAR DEVICES ROBOT PIN TOOL FIXTURE FOR 1536 FP1 PINS, .457mm
DIAMETER |
|
AFIX1536FP3MD |
MOLECULAR DEVICES ROBOT PIN TOOL FIXTURE FOR 1536 FP3 PINS, .787mm
DIAMETER |
|
AFIX1536FP9MD |
MOLECULAR DEVICES ROBOT PIN TOOL FIXTURE FOR 1536 FP9 PINS, .229mm
DIAMETER |
|
AFIX1536FP1 |
BASIC ROBOT PIN TOOL FIXTURE FOR 1536 FP1 PINS, .457mm DIAMETER |
|
AFIX1536FP3 |
BASIC ROBOT PIN TOOL FIXTURE FOR 1536 FP3 PINS, .787mm DIAMETER |
|
AFIX1536FP8 |
BASIC ROBOT PIN TOOL FIXTURE FOR 1536 FP8 PINS, .356mm DIAMETER |
|
AFIX1536FP9 |
BASIC ROBOT PIN TOOL FIXTURE FOR 1536 FP9 PINS, .229mm DIAMETER |
|
AFIXFX96FP1 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 96 FP1 PINS, .457mm DIAMETER |
|
AFIXFX96FP3 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 96 FP3 PINS, .787mm DIAMETER |
|
AFIXFX96FP4 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 96 FP4 PINS, .914mm DIAMETER |
|
AFIXFX96FP6 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 96 FP6 PINS, 1.58mm DIAMETER |
|
AFIXFX96FP8 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 96 FP8 PINS, .356mm DIAMETER |
|
AFIXFX96FP9 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 96 FP9 PINS, .229mm DIAMETER |
|
AFIXFX96FP11 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 96 FP11 PINS, 4.72mm DIAMETER |
|
AFIXFX384FP1 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 384 FP1 PINS, .457mm DIAMETER |
|
AFIXFX384FP3 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 384 FP3 PINS, .787mm DIAMETER |
|
AFIXFX384FP4 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 384 FP4 PINS, .914mm DIAMETER |
|
AFIXFX384FP6 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 384 FP6 PINS, 1.58mm DIAMETER |
|
AFIXFX384FP8 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 384 FP8 PINS, .356mm DIAMETER |
|
AFIXFX384FP9 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 384 FP9 PINS, .229mm DIAMETER |
|
AFIXFX1536FP1 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 1536 FP1 PINS, .457mm DIAMETER |
|
AFIXFX1536FP3 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 1536 FP3 PINS, .787mm DIAMETER |
|
AFIXFX1536FP8 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 1536 FP8 PINS, .356mm DIAMETER |
|
AFIXFX1536FP9 |
BECKMAN FX ROBOT PIN TOOL FIXTURE FOR 1536 FP9 PINS, .229mm DIAMETER |
|
AFIXH96FP1 |
Hamamatsu Robot Pin Tool Fixture For 96 FP1 Series Pins, 0.457mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH96FP3 |
Hamamatsu Robot Pin Tool Fixture For 96 FP3 Series Pins, 0.787mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH96FP4 |
Hamamatsu Robot Pin Tool Fixture For 96 FP4 Series Pins, 0.914mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH96FP6 |
Hamamatsu Robot Pin Tool Fixture For 96 FP6 Series Pins, 1.58mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH96FP8 |
Hamamatsu Robot Pin Tool Fixture For 96 FP8 Series Pins, 0.356mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH96FP9 |
Hamamatsu Robot Pin Tool Fixture For 96 FP9 Series Pins, 0.229mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH384FP1 |
Hamamatsu Robot Pin Tool Fixture For 384 FP1 Series Pins, 0.457mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH384FP3 |
Hamamatsu Robot Pin Tool Fixture For 384 FP3 Series Pins, 0.787mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH384FP4 |
Hamamatsu Robot Pin Tool Fixture For 384 FP4 Series Pins, 0.914mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH384FP6 |
Hamamatsu Robot Pin Tool Fixture For 384 FP6 Series Pins, 1.58mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH384FP8 |
Hamamatsu Robot Pin Tool Fixture For 384 FP8 Series Pins, 0.356mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH384FP9 |
Hamamatsu Robot Pin Tool Fixture For 384 FP9 Series Pins, 0.229mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH1536FP1 |
HAMAMATSU ROBOT PIN TOOL FIXTURE FOR 1536 FP1 PINS, 0.457mm DIAMETER,
(DRAWINGS #MG08-047-4M9003 AND #MG08-047-4M9004 |
|
AFIXH1536FP3 |
Hamamatsu Robot Pin Tool Fixture For 1536 FP3 Series Pins, 0.787mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH1536FP8 |
Hamamatsu Robot Pin Tool Fixture For 1536 FP8 Series Pins, 0.356mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXH1536FP9 |
Hamamatsu Robot Pin Tool Fixture For 1536 FP9 Series Pins, 0.229mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXP96FP1 |
PERKINELMER PIN TOOL FIXTURE FOR 96 FP1 PINS, .457mm DIAMETER |
|
AFIXP96FP3 |
PERKINELMER PIN TOOL FIXTURE FOR 96 FP3 PINS, .787mm DIAMETER |
|
AFIXP96FP4 |
PERKINELMER PIN TOOL FIXTURE FOR 96 FP4 PINS, 0.910mm DIAMETER |
|
AFIXP96FP6 |
PERKINELMER PIN TOOL FIXTURE FOR 96 FP6 PINS, 1.58mm DIAMETER |
|
AFIXP96FP8 |
PERKINELMER PIN TOOL FIXTURE FOR 96 FP8 PINS, 0.356mm DIAMETER |
|
AFIXP96FP9 |
PERKINELMER PIN TOOL FIXTURE FOR 96 FP9 PINS, .229mm DIAMETER |
|
AFIXP384FP1 |
PERKINELMER PIN TOOL FIXTURE FOR 384 FP1 PINS, .457mm DIAMETER |
|
AFIXP384FP3 |
PERKINELMER PIN TOOL FIXTURE FOR 384 FP3 PINS, .787mm DIAMETER |
|
AFIXP384FP4 |
PERKINELMER PIN TOOL FIXTURE FOR 384 FP4 PINS, 0.910mm DIAMETER |
|
AFIXP384FP6 |
PERKINELMER PIN TOOL FIXTURE FOR 384 FP6 PINS, 1.58mm DIAMETER |
|
AFIXP384FP8 |
PERKINELMER PIN TOOL FIXTURE FOR 384 FP8 PINS, 0.356mm DIAMETER |
|
AFIXP384FP9 |
PERKINELMER PIN TOOL FIXTURE FOR 384 FP9 PINS, .229mm DIAMETER |
|
AFIXP1536FP1 |
PERKINELMER PIN TOOL FIXTURE FOR 1536 FP1 PINS, .457mm DIAMETER |
|
AFIXP1536FP3 |
PERKINELMER PIN TOOL FIXTURE FOR 1536 FP3 PINS, .787mm DIAMETER |
|
AFIXP1536FP8 |
PERKINELMER PIN TOOL FIXTURE FOR 1536 FP8 PINS, 0.356mm DIAMETER |
|
AFIXP1536FP9 |
PERKINELMER PIN TOOL FIXTURE FOR 1536 FP9 PINS, .229mm DIAMETER |
|
AFIXV96FP1 |
Velocity 11 Robot Pin Tool Fixture for 96 FP1 Series Pins, 0.457mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV96FP3 |
Velocity 11 Robot Pin Tool Fixture for 96 FP3 Series Pins, 0.787mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV96FP4 |
Velocity 11 Robot Pin Tool Fixture for 96 FP4 Series Pins, 0.914mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV96FP6 |
Velocity 11 Robot Pin Tool Fixture for 96 FP6 Series Pins, 1.58mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV96FP8 |
Velocity 11 Robot Pin Tool Fixture for 96 FP8 Series Pins, 0.356mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV96FP9 |
Velocity 11 Robot Pin Tool Fixture for 96 FP9 Series Pins, 0.229mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV384FP1 |
Velocity 11 Robot Pin Tool Fixture for 384 FP1 Series Pins, 0.457mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV384FP3 |
Velocity 11 Robot Pin Tool Fixture for 384 FP3 Series Pins, 0.787mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV384FP4 |
Velocity 11 Robot Pin Tool Fixture for 384 FP4 Series Pins, 0.914mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV384FP6 |
Velocity 11 Robot Pin Tool Fixture for 384 FP6 Series Pins, 1.58mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV384FP8 |
Velocity 11 Robot Pin Tool Fixture for 384 FP8 Series Pins, 0.356mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV384FP9 |
Velocity 11 Robot Pin Tool Fixture for 384 FP9 Series Pins, 0.229mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV1536FP1 |
Velocity 11 Robot Pin Tool Fixture for 1536 FP1 Series Pins, 0.457mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV1536FP3 |
Velocity 11 Robot Pin Tool Fixture for 1536 FP3 Series Pins, 0.787mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV1536FP8 |
Velocity 11 Robot Pin Tool Fixture for 1536 FP8 Series Pins, 0.356mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
AFIXV1536FP9 |
Velocity 11 Robot Pin Tool Fixture for 1536 FP9 Series Pins, 0.229mm
Diameter, Ni-Lube-Coated, Includes Only Fixtures |
|
BGP |
BASIC GUIDE PIN FRAME TO CONVERT ROBOT PIN TOOLS INTO MANUAL VERSION |
|
BGP-E |
BASIC GUIDE PIN FRAME FOR E-CLIP VERSION PIN TOOLS, GUIDE PINS 21.5 MM
TALL |
|
BGPK |
KIT TO CONVERT ROBOT PIN TOOLS INTO MANUAL VERSION, INCLUDES BASIC GUIDE
PIN FRAME (BGP), MANUAL MOUNTING PLATE (BMPM) AND HANDLE |
|
BGPK-E |
KIT TO CONVERT E-CLIP STYLE ROBOT PIN TOOLS INTO MANUAL VERSION,
INCLUDES BASIC GUIDE PIN FRAME (BGP-E), MANUAL MOUNTING PLATE (BMPM) AND
HANDLE |
|
BGPL |
BASIC GUIDE PIN FRAME WITH 0.125" DIAMETER GUIDE PINS, TO ADAPT LONG
E-CLIP PINS TOOLS TO REGISTRATION FRAMES (VP 381A AND VP 381B) |
|
BGPKL |
KIT TO ADAPT LONG E-CLIP PIN TOOLS TO REGISTER TO VP 381A AND VP 381B,
INCLUDES LARGE GUIDE PIN FRAME (BGPL), MANUAL MOUNTING PLATE (BMPM) AND
HANDLE |
|
BMP |
BASIC MOUNTING PLATE FOR STANDARD VERSION, WITH BIOMEK HOLES AND HANDLE
HOLE |
|
BMPAPRICOT |
BASIC MOUNTING PLATE FOR APRICOT DESIGNS AND V&P PIN TOOL ROBOT,
INCLUDES BRIDGE PLATE (BMPMIDZYMARK) |
|
BMPAPRICOT-N |
BASIC MOUNTING PLATE FOR N MODEL APRICOTS, INCLUDES BRIDGE PLATE
(BMPMIDZYMARK) |
|
BMPCALIPER |
BASIC MOUNTING PLATE CALIPER ZEPHYR |
|
BMPCB384 |
BASIC MOUNTING PLATE CYBI-WELL 384 WITH RESETTING FEATURE |
|
BMPCB384V |
BASIC MOUNTING PLATE VARIO 384 WITH RESETTING FEATURE |
|
BMPCB96 |
BASIC MOUNTING PLATE CYBI-WELL 96 WITH RESETTING FEATURE |
|
BMPCB96V |
BASIC MOUNTING PLATE VARIO 96 WITH RESETTING FEATURE |
|
BMPFX |
BASIC MOUNTING PLATE FOR BECKMAN FX ROBOT |
|
BMPFXGRIPPER |
BASIC MOUNTING PLATE FOR BECKMAN FX GRIPPER |
|
BMPFXRESET |
BASIC MOUNTING PLATE FOR BECKMAN FX ROBOT WITH PIN RESETTING FEATURE |
|
BMPGENETIXQ |
BASIC PIN TOOL MOUNTING PLATE FOR GENETIX Q-PIX ROBOT |
|
BMPG3 |
BASIC PIN TOOL MOUNTING PLATE FOR GENOMIC SOLUTIONS GENEMACHINES G3
ROBOT |
|
BMPH |
BASIC MOUNTING PLATE HAMILTON MICROLAB |
|
BMPHAMAMATSU |
BASIC MOUNTING PLATE FOR HAMAMATSU ROBOT |
|
BMPHAMAMATSUR |
BASIC MOUNTING PLATE FOR HAMAMATSU ROBOT WITH ROTATIONAL ADJUSTMENT |
|
BMPMIDHAMAMATSU |
BRIDGE PLATE TO CONNECT HAMAMATSU FLOATING FIXTURES TO THE HAMAMATSU
MOUNT |
|
BMPHYDRA96 |
BASIC MOUNTING PLATE FOR ROBBINS HYDRA 96 |
|
BMPHRE |
BASIC MOUNTING PLATE FOR HIGH RESOLUTION ENGINEERING MICRO PIN ROBOT |
|
BMPJANUS-SM |
BASIC MOUNTING PLATE FOR SIDE MOUNTING ON A PERKINELMER JANUS ROBOT |
|
BMPLABCYTE |
BASIC MOUNTING PLATE FOR LABCYTE DYNAPETTE AND DECKPETTE WORKSTATIONS |
|
BMPM |
BASIC MOUNTING PLATE FOR CONVERTING ROBOT PIN TOOL TO MANUAL PIN TOOL,
INCLUDES HANDLE |
|
BMPM-E-CLIP |
BASIC MOUNTING PLATE FOR E-CLIP MANUAL PIN TOOLS, ALSO HAS HANDLE
MOUNTED TO IT |
|
BMPM-PAD |
FOAM SILICON RUBBER PAD CUT TO FIT UNDER A BMPM WITH APPROPRIATE NOTCHES
FOR STANDOFFS |
|
BMPMIDPE |
BRIDGE PLATE TO CONNECT PE FLOATING FIXTURES (8 SCREWS) TO THE STANDARD
V&P MOUNT (6 SCREWS) |
|
BMPMIDZYMARK |
CYBIO MOUNTING PLATE ASSEMBLY TO ACCOMMODATE 96 AND 384 MID PLATE FROM
CyBio ADAPTOR, WITH OUT THE EXTRA HOLES (CBP) |
|
BMPMULTIMEK |
BASIC MOUNTING PLATE FOR MULTIMEK, SAGIAN MULTIPETTE AND CCS |
|
BMPMULTIMEKR |
ROTATION ADJUSTABLE MOUNTING PLATE FOR USE WITH 1536 PIN TOOLS ON
MULTIMEK, SAGIAN MULTIPETTE AND CCS |
|
BMPMWG |
BASIC MOUNTING PLATE FOR MWG LAB HAND - MOUNTS TO E-CLIP AND BECKMAN TOP
FLOAT PLATES, WITH 2 NOTCHES FOR LAB HAND - |
|
BMPN |
BASIC MOUNTING PLATE FOR NOVARTIS ROBOT |
|
BMPPLATEPLUS96 |
BASIC MOUNTING PLATE FOR 96 MATRIX PLATEMATE PLUS ROBOTS- INCLUDES
BRIDGE PLATE |
|
BMPPLATEPLUS384 |
BASIC MOUNTING PLATE FOR 384 MATRIX PLATEMATE PLUS ROBOTS- INCLUDES
BRIDGE PLATE |
|
BMPPER |
ROTATION ADJUSTABLE MOUNTING PLATE FOR USE WITH 1536 PIN TOOLS ON
PLATETRAK, MINITRAK AND EP3 |
|
BMPQIAGEN |
BASIC MOUNTING PLATE AND DELRIN BLOCK FOR QIAGEN BIO ROBOTS |
|
BMPROMA |
BASIC MOUNTING PLATE FOR TECAN GENESIS AND FREEDOM ROMA ARM PLATE
HANDLERS |
|
BMPSEIKO |
BASIC MOUNTING PLATE FOR SEIKO WORKSTATION |
|
BMPT |
BASIC MOUNTING PLATE FOR TOMTEC, WITH STEEL CLAMP BLOCKS |
|
BMPTAP |
BASIC MOUNTING PLATE FOR THE AUTOMATION PARTNERSHIP WORKSTATION |
|
BMPTECAN |
BASIC MOUNTING PLATE FOR TECAN Te-MO PIPETTING HEAD |
|
BMPTECANR |
ROTATION ADJUSTABLE MOUNTING PLATE FOR USE WITH 1536 PIN TOOLS ON TECAN
Te-MO PIPETTING HEADS |
|
BMPVELOCITY11RA |
ROTATION ADJUSTABLE MOUNTING PLATE FOR USE WITH 96, 384 AND 1536 PIN
TOOLS ON VELOCITY 11 V-PREP AND BRAVO LIQUID HANDLERS. ATTACHES TO TOP
PLATE PROVIDED BY VELOCITY 11. |
|
BMPVELOCITY11RB |
Rotation Adjustable Mounting Plate For Use With 96, 384 And 1536 Pin
Tools On Velocity 11 Bravo & V-Prep Liquid Handlers. Attaches To Top
Plate Provided By Velocity 11. Includes Covers For Side Windows. |
|
BMPZYMARK |
BASIC MOUNTING PLATE FOR CALIPER (ZYMARK) SCICLONE ROBOT |
|
BMPZYMARKHV |
BASIC MOUNTING PLATE FOR ZYMARK SCICLONE ROBOT - HIGH VOLUME HEAD,
INCLUDES THE ZYMARK BRIDGE PLATE (BMPMIDZYMARK) |
|
FP |
E-Clip Style Floating, Solid Pin - 1.58mm Chamfered to 0.3mm Diameter
Flat Tip, 34mm Long, 23mm Exposed Pin Length, Delivers ~100nl |
|
FP1 |
FLOATING TUBE PIN - 0.457mm DIAMETER, 50.8mm LONG, 17mm EXPOSED PIN
LENGTH, DELIVERS ~20nl |
|
FP1-W |
Wounding Pin 0.457 mm Diameter Pin Protruding 1 mm Out a 38 mm Long
Cannula, 1.58 mm in Diameter with an E-Clip Groove in the Cannula |
|
FP1-WP |
Parylene Coated Wounding Pin with 0.557 mm Diameter Pin Protruding 1 mm Out a
38. mm Long Cannula, 1.68 mm in Diameter with an E-Clip Groove in the Cannula |
|
FP11 |
FLAT TIP, E-CLIP STYLE FLOATING PIN, 4.77mm DIAMETER, 51.15mm LONG,
EXPOSED PIN LENGTH = 39mm |
|
FP12 |
E-CLIP P12 PIN 2.36mm PIN DIAMETER, 26.93mm LONG, 22mm EXPOSED PIN
LENGTH |
|
FP12A |
E-CLIP P12 PIN 2.36mm PIN DIAMETER, 50.8mm LONG, 38mm EXPOSED PIN LENGTH |
|
FP13 |
E-CLIP P13 PIN 3.175mm PIN DIAMETER, 26.93mm LONG |
|
FP1H |
FLOATING TUBE, HYDROPHOBIC PIN - 0.457MM DIAMETER, 50.8MM LONG, 17MM
EXPOSED PIN LENGTH, DELIVERS ~20nl |
|
FP1CB |
FLOATING TUBE PIN - 0.457mm DIAMETER, 33mm LONG, 12mm EXPOSED PIN
LENGTH, DELIVERS ~20nl |
|
FP1CBH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.457mm DIAMETER, 33mm LONG, 12mm
EXPOSED PIN LENGTH, DELIVERS ~20nl |
|
FP1CS10 |
FLOATING TUBE, 10nl-SLOT PIN - 0.457mm DIAMETER, 33mm LONG, 12mm EXPOSED
PIN LENGTH |
|
FP1CS10H |
FLOATING TUBE, 10nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 33mm LONG,
12mm EXPOSED PIN LENGTH |
|
FP1CS20 |
FLOATING TUBE, 20nl-SLOT PIN - 0.457mm DIAMETER, 33mm LONG, 12mm EXPOSED
PIN LENGTH |
|
FP1CS20H |
FLOATING TUBE, 20nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 33mm LONG,
12mm EXPOSED PIN LENGTH |
|
FP1CS30 |
FLOATING TUBE, 30nl-SLOT PIN - 0.457mm DIAMETER, 33mm LONG, 12mm EXPOSED
PIN LENGTH |
|
FP1CS30H |
FLOATING TUBE, 30nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 33mm LONG,
12mm EXPOSED PIN LENGTH |
|
FP1CS40 |
FLOATING TUBE, 40nl-SLOT PIN - 0.457mm DIAMETER, 33mm LONG, 12mm EXPOSED
PIN LENGTH |
|
FP1CS40H |
FLOATING TUBE, 40nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 33mm LONG,
12mm EXPOSED PIN LENGTH |
|
FP1CS50 |
FLOATING TUBE, 50nl-SLOT PIN - 0.457mm DIAMETER, 33mm LONG, 12mm EXPOSED
PIN LENGTH |
|
FP1CS50H |
FLOATING TUBE, 50nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 33mm LONG,
12mm EXPOSED PIN LENGTH |
|
FP1N |
FLOATING TUBE PIN - 0.457mm DIAMETER, 38.1mm LONG, 17mm EXPOSED PIN
LENGTH, DELIVERS ~20nl |
|
FP1NH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.457mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH, DELIVERS ~20nl |
|
FP1NS10 |
FLOATING TUBE, 10nl-SLOT PIN - 0.457mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP1NS10H |
FLOATING TUBE, 10nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 38.1mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP1NS20 |
FLOATING TUBE, 20nl-SLOT PIN - 0.457mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP1NS20H |
FLOATING TUBE, 20nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 38.1mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP1NS30 |
FLOATING TUBE, 30nl-SLOT PIN - 0.457mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP1NS30H |
FLOATING TUBE, 30nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 38.1mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP1NS40 |
FLOATING TUBE, 40nl-SLOT PIN - 0.457mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP1NS40H |
FLOATING TUBE, 40nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 38.1mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP1NS50 |
FLOATING TUBE, 50nl-SLOT PIN - 0.457mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP1NS50H |
FLOATING TUBE, 50nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 38.1mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP1NS6 |
FLOATING TUBE, 6nl-SLOT PIN - 0.457mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP1NS6H |
FLOATING TUBE, 6nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 38.1mm LONG,
17mm EXPOSED PIN LENGTH |
|
FP1S10 |
FLOATING TUBE, 10nl-SLOT PIN - 0.457mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP1S10H |
FLOATING TUBE, 10nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 50.8mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP1S20 |
FLOATING TUBE, 20nl-SLOT PIN - 0.457mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP1S20H |
FLOATING TUBE, 20nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 50.8mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP1S30 |
FLOATING TUBE, 30nl-SLOT PIN - 0.457mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP1S30H |
FLOATING TUBE, 30nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 50.8mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP1S40 |
FLOATING TUBE, 40nl-SLOT PIN - 0.457mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP1S40H |
FLOATING TUBE, 40nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 50.8mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP1S50 |
FLOATING TUBE, 50nl-SLOT PIN - 0.457mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP1S50H |
FLOATING TUBE, 50nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 50.8mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP1S6 |
FLOATING TUBE, 6nl-SLOT PIN - 0.457mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP1S6T |
FLOATING TUBE, 6nl-SLOT PIN - 0.457mm DIAMETER, 62mm LONG, 28mm EXPOSED
PIN LENGTH |
|
FP1TT |
FLOATING TUBE, SOLID PIN - 0.457mm DIAMETER, 62mm LONG, 28mm EXPOSED PIN
LENGTH |
|
FP1T |
FLOATING TUBE PIN - 0.457mm DIAMETER, 50.8mm LONG, 30mm EXPOSED PIN
LENGTH, DELIVERS ~20nl |
|
FP1TH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.457mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH, DELIVERS ~20nl |
|
FP1TS10 |
FLOATING TUBE, 10nl-SLOT PIN - 0.457mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH |
|
FP1TS10H |
FLOATING TUBE, 10nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 50.8mm
LONG, 30mm EXPOSED PIN LENGTH |
|
FP1TS20 |
FLOATING TUBE, 20nl-SLOT PIN - 0.457mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH |
|
FP1TS20H |
FLOATING TUBE, 20nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 50.8mm
LONG, 30mm EXPOSED PIN LENGTH |
|
FP1TS30 |
FLOATING TUBE, 30nl-SLOT PIN - 0.457mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH |
|
FP1TS30H |
FLOATING TUBE, 30nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 50.8mm
LONG, 30mm EXPOSED PIN LENGTH |
|
FP1TS40 |
FLOATING TUBE, 40nl-SLOT PIN - 0.457mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH |
|
FP1TS40H |
FLOATING TUBE, 40nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 50.8mm
LONG, 30mm EXPOSED PIN LENGTH |
|
FP1TS50 |
FLOATING TUBE, 50nl-SLOT PIN - 0.457mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH |
|
FP1TS50H |
FLOATING TUBE, 50nl-SLOT HYDROPHOBIC PIN - 0.457mm DIAMETER, 50.8mm
LONG, 30mm EXPOSED PIN LENGTH |
|
FP3 |
FLOATING TUBE PIN - 0.787mm DIAMETER, 50.8mm LONG, 17mm EXPOSED PIN
LENGTH, DELIVERS ~80nl |
|
FP3-WP-P |
|
|
FP3H |
FLOATING TUBE, HYDROPHOBIC PIN - 0.787mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH, DELIVERS ~80nl |
|
FP3CB |
FLOATING TUBE PIN - 0.787mm DIAMETER, 33mm LONG, 12mm EXPOSED PIN
LENGTH, DELIVERS ~80nl |
|
FP3CBH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.787mm DIAMETER, 33mm LONG, 12mm
EXPOSED PIN LENGTH, DELIVERS ~80nl |
|
FP3CS50 |
FLOATING TUBE, 50nl-SLOT PIN - 0.787mm DIAMETER, 33mm LONG, 12mm EXPOSED
PIN LENGTH |
|
FP3CS50H |
FLOATING TUBE, 50nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 33mm LONG,
12mm EXPOSED PIN LENGTH |
|
FP3CS100 |
FLOATING TUBE, 100nl-SLOT PIN - 0.787mm DIAMETER, 33mm LONG, 12mm
EXPOSED PIN LENGTH |
|
FP3CS100H |
FLOATING TUBE, 100nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 33mm LONG,
12mm EXPOSED PIN LENGTH |
|
FP3CS200 |
FLOATING TUBE, 200nl-SLOT PIN - 0.787mm DIAMETER, 33mm LONG, 12mm
EXPOSED PIN LENGTH |
|
FP3CS200H |
FLOATING TUBE, 200nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 33mm LONG,
12mm EXPOSED PIN LENGTH |
|
FP3CS500 |
FLOATING TUBE, 500nl-SLOT PIN - 0.787mm DIAMETER, 33mm LONG, 12mm
EXPOSED PIN LENGTH |
|
FP3CS500H |
FLOATING TUBE, 500nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 33mm LONG,
12mm EXPOSED PIN LENGTH |
|
FP3N |
FLOATING TUBE PIN - 0.787mm DIAMETER, 38.1mm LONG, 17mm EXPOSED PIN
LENGTH, DELIVERS ~80nl |
|
FP3NH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.787mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH, DELIVERS ~80nl |
|
FP3NS50 |
FLOATING TUBE, 50nl-SLOT PIN - 0.787mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP3NS50H |
FLOATING TUBE, 50nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 38.1mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP3NS100 |
FLOATING TUBE, 100nl-SLOT PIN - 0.787mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP3NS100H |
FLOATING TUBE, 100nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 38.1mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP3NS200 |
FLOATING TUBE, 200nl-SLOT PIN - 0.787mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP3NS200H |
FLOATING TUBE, 200nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 38.1mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP3NS500 |
FLOATING TUBE, 500nl-SLOT PIN - 0.787mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP3NS500H |
FLOATING TUBE, 500nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 38.1mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP3S50 |
FLOATING TUBE, 50nl-SLOT PIN - 0.787mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP3S50H |
FLOATING TUBE, 50nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 50.8mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP3S100 |
FLOATING TUBE, 100nl-SLOT PIN - 0.787mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP3S100H |
FLOATING TUBE, 100nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 50.8mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP3S200 |
FLOATING TUBE, 200nl-SLOT PIN - 0.787mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP3S200H |
FLOATING TUBE, 200nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 50.8mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP3S500 |
FLOATING TUBE, 500nl-SLOT PIN - 0.787mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP3S500H |
FLOATING TUBE, 500nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 50.8mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP3T |
FLOATING TUBE PIN - 0.787mm DIAMETER, 50.8mm LONG, 30mm EXPOSED PIN
LENGTH, DELIVERS ~80nl |
|
FP3TH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.787mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH, DELIVERS ~80nl |
|
FP3TS50 |
FLOATING TUBE, 50nl-SLOT PIN - 0.787mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH |
|
FP3TS50H |
FLOATING TUBE, 50nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 50.8mm
LONG, 30mm EXPOSED PIN LENGTH |
|
FP3TS100 |
FLOATING TUBE, 100nl-SLOT PIN - 0.787mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH |
|
FP3TS100H |
FLOATING TUBE, 100nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 50.8mm
LONG, 30mm EXPOSED PIN LENGTH |
|
FP3TS200 |
FLOATING TUBE, 200nl-SLOT PIN - 0.787mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH |
|
FP3TS200H |
FLOATING TUBE, 200nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 50.8mm
LONG, 30mm EXPOSED PIN LENGTH |
|
FP3TS500 |
FLOATING TUBE, 500nl-SLOT PIN - 0.787mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH |
|
FP3TS500H |
FLOATING TUBE, 500nl-SLOT HYDROPHOBIC PIN - 0.787mm DIAMETER, 50.8mm
LONG, 30mm EXPOSED PIN LENGTH |
|
FP4 |
FLOATING TUBE PIN - 0.914mm DIAMETER, 50.8mm LONG, 17mm EXPOSED PIN
LENGTH, DELIVERS ~120nl |
|
FP4-W |
Wounding Pin 0.914 mm Diameter Pin Protruding 1 mm Out a 38 mm Cannula
with an E-Clip Groove in the Cannula. |
|
FP4-WP |
Parylene Coated Wounding Pin with 1.014 mm Diameter Pin Protruding 1 mm
Out a 38 mm Long Cannula, 1.68 mm in Diameter with an E-Clip Groove in
the Cannula. |
|
FP4H |
FLOATING TUBE, HYDROPHOBIC PIN - 0.914mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH, DELIVERS ~120nl |
|
FP4CB |
FLOATING TUBE PIN - 0.914mm DIAMETER, 33mm LONG, 12mm EXPOSED PIN
LENGTH, DELIVERS ~120nl |
|
FP4CBH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.914mm DIAMETER, 33mm LONG, 12mm
EXPOSED PIN LENGTH, DELIVERS ~120nl |
|
FP4CS1000 |
FLOATING TUBE, 1000nl-SLOT PIN - 0.914mm DIAMETER, 33mm LONG, 12mm
EXPOSED PIN LENGTH |
|
FP4CS2000 |
FLOATING TUBE, 2000nl-SLOT PIN - 0.914mm DIAMETER, 33mm LONG, 12mm
EXPOSED PIN LENGTH |
|
FP4CS1000H |
FLOATING TUBE, 1000nl-SLOT HYDROPHOBIC PIN - 0.914mm DIAMETER, 33mm
LONG, 12mm EXPOSED PIN LENGTH |
|
FP4CS2000H |
FLOATING TUBE, 2000nl-SLOT HYDROPHOBIC PIN - 0.914mm DIAMETER, 33mm
LONG, 12mm EXPOSED PIN LENGTH |
|
FP4N |
FLOATING TUBE PIN - 0.914mm DIAMETER, 38.1mm LONG, 17mm EXPOSED PIN
LENGTH, DELIVERS ~120nl |
|
FP4NH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.914mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH, DELIVERS ~120nl |
|
FP4NS1000 |
FLOATING TUBE, 1000nl-SLOT PIN - 0.914mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP4NS1000H |
FLOATING TUBE, 1000nl-SLOT HYDROPHOBIC PIN - 0.914mm DIAMETER, 38.1mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP4NS2000 |
FLOATING TUBE, 2000nl-SLOT PIN - 0.914mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP4NS2000H |
FLOATING TUBE, 2000nl-SLOT HYDROPHOBIC PIN - 0.914mm DIAMETER, 38.1mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP4S1000 |
FLOATING TUBE, 1000nl-SLOT PIN - 0.914mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP4S1000H |
FLOATING TUBE, 1000nl-SLOT HYDROPHOBIC PIN - 0.914mm DIAMETER, 50.8mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP4S2000 |
FLOATING TUBE, 2000nl-SLOT PIN - 0.914mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH |
|
FP4S2000H |
FLOATING TUBE, 2000nl-SLOT HYDROPHOBIC PIN - 0.914mm DIAMETER, 50.8mm
LONG, 17mm EXPOSED PIN LENGTH |
|
FP4T |
FLOATING TUBE PIN - 0.914mm DIAMETER, 50.8mm LONG, 30mm EXPOSED PIN
LENGTH, DELIVERS ~120nl |
|
FP4TS1000 |
FLOATING TUBE, 1000nl-SLOT PIN - 0.914mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH |
|
FP4TS1000H |
FLOATING TUBE, 1000nl-SLOT HYDROPHOBIC PIN - 0.914mm DIAMETER, 50.8mm
LONG, 30mm EXPOSED PIN LENGTH |
|
FP4TS2000 |
FLOATING TUBE, 2000nl-SLOT PIN - 0.914mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH |
|
FP4TS2000H |
FLOATING TUBE, 2000nl-SLOT HYDROPHOBIC PIN - 0.914mm DIAMETER, 50.8mm
LONG, 30mm EXPOSED PIN LENGTH |
|
FP4TH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.914mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH, DELIVERS ~120nl |
|
FP6 |
E-Clip Style Floating, Flat Tip Solid Pin - 1.58mm Diameter, 33.3mm
Long, 22.5mm Exposed Pin Length |
|
FP6-WP |
Parylene coated wounding pin 1.68 mm Diameter Pin 35 mm Long with an
E-Clip Groove, price each |
|
FP6S.5 |
FLAT TIP, E-CLIP STYLE FLOATING 0.5ul-SLOT PIN - 1.58mm DIAMETER, 33.3mm
LONG, 22.5mm EXPOSED PIN LENGTH |
|
FP6S |
FLAT TIP, E-CLIP STYLE FLOATING 1ul-SLOT PIN - 1.58mm DIAMETER, 33.3mm
LONG, 22.5mm EXPOSED PIN LENGTH |
|
FP6S2 |
FLAT TIP, E-CLIP STYLE FLOATING 2ul-SLOT PIN - 1.58mm DIAMETER, 33.3mm
LONG, 22.5mm EXPOSED PIN LENGTH |
|
FP6S5 |
FLAT TIP, E-CLIP STYLE FLOATING 5ul-SLOT PIN - 1.58mm DIAMETER, 33.3mm
LONG, 22.5mm EXPOSED PIN LENGTH |
|
FP8 |
FLOATING TUBE PIN - 0.356mm DIAMETER, 50.8mm LONG, 17mm EXPOSED PIN
LENGTH, DELIVERS ~10nl |
|
FP8CB |
FLOATING TUBE PIN - 0.356mm DIAMETER, 33mm LONG, 12mm EXPOSED PIN
LENGTH, DELIVERS ~10nl |
|
FP8CBH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.356mm DIAMETER, 33mm LONG, 12mm
EXPOSED PIN LENGTH, DELIVERS ~10nl |
|
FP8H |
FLOATING TUBE, HYDROPHOBIC PIN - 0.356mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH, DELIVERS ~10nl |
|
FP8N |
FLOATING TUBE PIN - 0.356mm DIAMETER, 38.1mm LONG, 17mm EXPOSED PIN
LENGTH, DELIVERS ~10nl |
|
FP8NH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.356mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH, DELIVERS ~10nl |
|
FP8T |
FLOATING TUBE PIN - 0.356mm DIAMETER, 50.8mm LONG, 30mm EXPOSED PIN
LENGTH, DELIVERS ~10nl |
|
FP8TH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.356mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH, DELIVERS ~10nl |
|
FP9 |
FLOATING TUBE PIN - 0.229mm DIAMETER, 50.8mm LONG, 17mm EXPOSED PIN
LENGTH, DELIVERS ~4nl |
|
FP9H |
FLOATING TUBE, HYDROPHOBIC PIN - 0.229mm DIAMETER, 50.8mm LONG, 17mm
EXPOSED PIN LENGTH, DELIVERS ~4nl |
|
FP9CB |
FLOATING TUBE PIN - 0.229mm DIAMETER, 33mm LONG, 12mm EXPOSED PIN
LENGTH, DELIVERS ~4nl |
|
FP9CBH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.229mm DIAMETER, 33mm LONG, 12mm
EXPOSED PIN LENGTH, DELIVERS ~4nl |
|
FP9N |
FLOATING TUBE PIN - 0.229mm DIAMETER, 38.1mm LONG, 17mm EXPOSED PIN
LENGTH, DELIVERS ~4nl |
|
FP9NH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.229mm DIAMETER, 38.1mm LONG, 17mm
EXPOSED PIN LENGTH, DELIVERS ~4nl |
|
FP9T |
FLOATING TUBE PIN - 0.229mm DIAMETER, 50.8mm LONG, 30mm EXPOSED PIN
LENGTH, DELIVERS ~4nl |
|
FP9TH |
FLOATING TUBE, HYDROPHOBIC PIN - 0.229mm DIAMETER, 50.8mm LONG, 30mm
EXPOSED PIN LENGTH, DELIVERS ~4nl |
|
FP11 |
FLAT TIP, E-CLIP STYLE FLOATING PIN, 4.77mm DIAMETER, 51.15mm LONG, 39
mm EXPOSED PIN LENGTH |
|
FP13 |
FLAT TIP, E-CLIP STYLE FLOATING PIN, 3.18m DIAMETER, 27mm LONG, 22.mm
EXPOSED PIN LENGTH |
|
FPFS2 |
FLOATING E-CLIP PIN FOR FROZEN SPECIMEN SAMPLER WITH 2 UL SLOT AND
E-CLIP GROOVE |
|
FPS.5 |
E-CLIP STYLE FLOATING 0.5ul-SLOT PIN - 1.58mm DIAMETER, 34mm LONG, 23mm
EXPOSED PIN LENGTH |
|
FPS1 |
E-CLIP STYLE FLOATING 1ul-SLOT PIN - 1.58mm DIAMETER, 34mm LONG, 23mm
EXPOSED PIN LENGTH |
|
FPS2 |
E-CLIP STYLE FLOATING 2ul-SLOT PIN - 1.58mm DIAMETER, 34mm LONG, 23mm
EXPOSED PIN LENGTH |
|
FPS5 |
E-CLIP STYLE FLOATING 5ul-SLOT PIN - 1.58mm DIAMETER, 34mm LONG, 23mm
EXPOSED PIN LENGTH |
|
FPAM |
FLOATING E-CLIP PIN, 1.58 MM DIAMETER, 63.5 MM LONG, 45 MM EXPOSED PIN
LENGTH IN PIN TOOL |
|
FXALP-FM |
FLAT MOUNT FOR BECKMAN FX WITH 4 LEGS TO ATTACH TO BECKMAN FX ALP BASE
FEATURE. TOTAL HEIGHT FROM BOTTOM OF BASE TO INSIDE BOTTOM OF POCKET
MOUNT = 152.4 MM (SAME AS STANDARD BECKMAN ALP) |
|
FXALP-FMS |
FLAT MOUNT FOR BECKMAN FX WITH 4 LEGS TO ATTACH TO BECKMAN FX ALP BASE
FEATURE. TOTAL HEIGHT FROM BOTTOM OF BASE TO INSIDE BOTTOM OF POCKET
MOUNT = 128 MM (24.4 MM SHORTER THAN A STANDARD BECKMAN ALP) |
|
FXALP-PM |
POCKET MOUNT FOR SBS FOOTPRINT REGISTRATION FEATURE, WITH 2 SECURING
SCREWS AND 4 LEGS TO ATTACH TO BECKMAN FX ALP BOTTOM FEATURE. TOTAL
HEIGHT FROM BOTTOM OF BASE TO INSIDE BOTTOM OF POCKET MOUNT = 152.4 MM
(SAME AS STANDARD BECKMAN ALP) |
|
FXALP-PMS |
POCKET MOUNT FOR SBS FOOTPRINT REGISTRATION FEATURE, WITH 2 SECURING
SCREWS AND 4 LEGS TO ATTACH TO BECKMAN FX ALP BOTTOM FEATURE. TOTAL
HEIGHT FROM BOTTOM OF BASE TO INSIDE BOTTOM OF POCKET MOUNT = 128 MM
(24.4 MM SHORTER THAN THE STANDARD BECKMAN ALP) |
|
FXALPBASE |
BASE PLATE WITH ALIGNMENT PINS AND SPRING LOADED ATTACHMENT SCREWS FOR
BECKMAN FX ALP SYSTEM |
|
MD-BASE-RACK |
MOLECULAR DEVICES BASE RACK FOR 384 AND 1536 PIN TOOL ASSEMBLIES |
|
MD-COVER |
MOLECULAR DEVICES PIN TOOL ASSEMBLY COVER FOR 384 AND 1536 PIN TOOL
ASSEMBLIES |
|
P |
FIXED PIN - 1.58mm DIAMETER, 22mm EXPOSED PIN LENGTH, DELIVERS ~ 0.2ul
HANGING DROP |
|
P1 |
FIXED PIN - 0.457mm DIAMETER, 14mm EXPOSED PIN LENGTH, DELIVERS A 20nl
HANGING DROP |
|
P13 |
FIXED STAINLESS STEEL PIN - 3.18mm DIAMETER, 26.9mm PIN LENGTH, DELIVERS
~ 3 ml HANGING DROP |
|
P1S10 |
FIXED 10nl-SLOT PIN - 0.457mm DIAMETER, 14mm EXPOSED PIN LENGTH |
|
P1S50 |
FIXED 50nl-SLOT PIN - 0.457mm DIAMETER, 14mm EXPOSED PIN LENGTH |
|
P2 |
FIXED PIN - 1.19mm DIAMETER, 22mm EXPOSED PIN LENGTH, DELIVERS ~ 0.1ul
HANGING DROP |
|
P3 |
FIXED PIN - 0.787mm DIAMETER, 14mm EXPOSED PIN LENGTH, DELIVERS A 45nl
HANGING DROP |
|
P3S100 |
FIXED 100nl-SLOT PIN - 0.787mm DIAMETER, 14mm EXPOSED PIN LENGTH |
|
P3S200 |
FIXED 200nl-SLOT PIN - 0.787mm DIAMETER, 14mm EXPOSED PIN LENGTH |
|
P3S500 |
FIXED 500nl-SLOT PIN - 0.787mm DIAMETER, 14mm EXPOSED PIN LENGTH |
|
PS.5 |
FIXED 0.5ul-SLOT PIN - 1.58mm DIAMETER, 22mm EXPOSED PIN LENGTH |
|
PS1 |
FIXED 1ul-SLOT PIN - 1.58mm DIAMETER, 22mm EXPOSED PIN LENGTH |
|
PS10 |
FIXED 10ul-SLOT PINS - 3.15mm DIAMETER, 26.92mm LONG |
|
PS2 |
FIXED 2ul-SLOT PIN - 1.58mm DIAMETER, 22mm EXPOSED PIN LENGTH |
|
PS5 |
FIXED 5ul-SLOT PIN - 1.58mm DIAMETER, 22mm EXPOSED PIN LENGTH |
|
VP 101 |
VACUUM MANIFOLD FOR VP 107 FILTER MANIFOLD |
|
VP 101A |
VACUUM MANIFOLD FOR 350ul FILTER PLATE |
|
VP 101B |
VACUUM MANIFOLD FOR 800ml FILTER PLATE |
|
VP
110 |
V&P SCIENTIFIC PIN CLEANING SOLUTION FOR SOLID AND SLOT PINS,
CONCENTRATED SOLUTION, 30ml/BOTTLE |
|
VP 121 |
CORNWALL DISPENSING SYRINGE - 5ml CAPACITY |
|
VP 150 |
384 WELL MICROPLATE WELL INDICATOR |
|
VP 175A |
10 CHANNEL MANIFOLD - 14mm SPACING, 9 mm LONG - GEN-PROBE RACK |
|
VP 175D |
8 CHANNEL MANIFOLD 20 mm SPACING, 9.6 mm LONG - GEN-PROBE RACK |
|
VP 176 |
20 CHANNEL GAS EVAPORATION BLOCK MANIFOLD FOR TEST TUBES, 19mm Center to
Center Spacing |
|
VP 177 |
96 CHANNEL GAS EVAPORATION BLOCK MANIFOLD FOR DEEP WELL PLATES |
|
VP 177-24 |
24 CHANNEL GAS EVAPORATION BLOCK MANIFOLD, 19 GAUGE TUBES, 45mm EXPOSED,
CENTER TO CENTER SPACING = 20mm |
|
VP 177-48 |
48 CHANNEL GAS EVAPORATION BLOCK MANIFOLD, 19 GAUGE TUBE 45mm EXPOSED,
CENTER TO CENTER SPACING = 13mm |
|
VP 177-STIR |
Sterile Stirring system for 96 and 384 well microplates using an orbital
shaker and disposable pin tools |
|
VP 177A |
96 DEEP WELL PLATE ASPIRATOR WITH 42 MM LONG 19 GAUGE TUBES, WITH Z
HEIGHT ADJUSTMENT AND MICROPLATE REGISTRATION FEATURE |
|
VP 177A-1 |
96 DEEP WELL PLATE ASPIRATOR WITH 42 MM LONG 19 GAUGE TUBES, WITH SPRING
LOADED Z HEIGHT ADJUSTMENT AND BOTTOM SLIDING MICROPLATE REGISTRATION
FEATURE |
|
VP 177A-1B |
POLYCARBONATE BASE FOR VP 177A-1 |
|
VP 177A-S4.5 |
ASPIRATION SPACER, 4.5mm THICK ACRYLIC CUT TO SBS DIMENSIONS (127.76mm
BY 85.48mm) |
|
VP 177AD |
96 DEEP WELL PLATE DISPENSER WITH 42 MM LONG 19 GAUGE TUBES, WITH Z
HEIGHT ADJUSTMENT AND MICROPLATE REGISTRATION FEATURE |
|
VP 177AD-PLUS |
VP 177AD 96 DEEP WELL PLATE DISPENSER WITH 42 MM LONG 19 GAUGE TUBES,
WITH Z HEIGHT ADJUSTMENT AND MICROPLATE REGISTRATION FEATURE PLUS BOTTLE
TOP DISPENSER |
|
VP 177AD-1 |
96 DEEP WELL PLATE DISPENSER WITH 42 MM LONG 19 GAUGE TUBES, WITH SPRING
LOADED Z HEIGHT ADJUSTMENT AND BOTTOM SLIDING MICROPLATE REGISTRATION
FEATURE |
|
VP 177AD-1-PLUS |
96 DEEP WELL PLATE DISPENSER WITH 42 MM LONG 19 GAUGE TUBES, WITH SPRING
LOADED Z HEIGHT ADJUSTMENT AND BOTTOM SLIDING MICROPLATE REGISTRATION
FEATURE |
|
VP 177AD-1-24 |
24 DEEP WELL PLATE DISPENSER WITH 42 MM LONG 19 GAUGE TUBES, WITH SPRING
LOADED Z HEIGHT ADJUSTMENT AND BOTTOM SLIDING MICROPLATE REGISTRATION
FEATURE |
|
VP 177AD-1-24-PLUS |
24 DEEP WELL PLATE DISPENSER WITH 42 MM LONG 19 GAUGE TUBES, WITH SPRING
LOADED Z HEIGHT ADJUSTMENT AND BOTTOM SLIDING MICROPLATE REGISTRATION
FEATURE |
|
VP 177AD-1-24T |
24 Deep Well Plate Dispenser on 18 mm centers with 42mm long 19 gauge
tubes, with spring loaded Z height adjustment and sliding microplate
registration feature, with 4 Stainless Steel Dowels Locating In Thompson
Instrument Co. Vacuum Manifold. |
|
VP 177AD-1CR
|
CHEMICALLY RESISTANT 96 DEEP WELL PLATE DISPENSER WITH 42 MM LONG 19 GAUGE
TUBES, WITH SPRING LOADED Z HEIGHT ADJUSTMENT AND BOTTOM SLIDING
MICROPLATE REGISTRATION FEATURE |
|
VP 177AD-1-72A |
72 Tube Dispenser With 13mm Long 23 Gauge Tubes, 6 Rows Of 12, On 9mm
Centers, With Spring Loaded Z Height Adjustment And Bottom Sliding
Microplate Registration Feature. |
|
VP 178 |
96 DEEP WELL PLATE WASHER, TUBES 45 mm LONG |
|
VP 178A |
96 MICROPLATE ASPIRATOR, TUBES 42 mm LONG |
|
VP 178A-64 |
64 Tube ProPlate Aspirator, Tubes are 45mm Long, Guide Pins Are Adjustable to
Raise the Aspiration Tubes 0.5mm to 5mm Above the Well Bottom Of the Grace
Biolab ProPlate MicroArray System. |
|
VP 178B |
96 STANDARD WELL MICROPLATE WASHER, 19 GAUGE TUBES 7 MM LONG |
|
VP 178BJ |
96 STANDARD PLATE ASPIRATOR, 13 MM LONG 20 GAUGE TUBES 316 S/S, MOUNTS
TO VP 179A PLATE REGISTRATION JIG |
|
VP 178BJ-117 |
117 TUBE ASPIRATOR FOR 96 STANDARD MICROPLATE, 13 MM LONG 20 GAUGE TUBES
316 S/S, MOUNTS TO VP 179A PLATE REGISTRATION JIG |
|
VP 178BJD |
96 STANDARD MICROPLATE DISPENSER, WITH 13 MM LONG 20 GAUGE 316 S/S TUBES
MOUNTS TO A VP 179A PLATE REGISTRATION JIG |
|
VP 178BJD-PLUS |
96 STANDARD MICROPLATE DISPENSER, WITH 13 MM LONG 20 GAUGE 316 S/S TUBES
MOUNTS TO A VP 179A PLATE REGISTRATION JIG, PLUS BOTTLE TOP DISPENSER |
|
VP 178JD |
96 DEEP WELL MICROPLATE DISPENSER, WITH 42 MM LONG 19 GAUGE S/S TUBES
MOUNTS TO A VP 179A PLATE REGISTRATION JIG |
|
VP 178JD-PLUS |
96 DEEP WELL MICROPLATE DISPENSER, WITH 42 MM LONG 19 GAUGE S/S TUBES
MOUNTS TO A VP 179A PLATE REGISTRATION JIG, PLUS BOTTLE TOP DISPENSER |
|
VP 178C |
96 WELL PLATE ANGLED TUBE ASPIRATOR, 19 GAUGE TUBES; 11mm EXPOSED
LENGTH, POLYPROPYLENE MANIFOLD DESIGNED FOR FREE HAND USE OF GUIDE PINS
ON THE ANGLE RAMP |
|
VP 178D |
96 SLANT TUBE ASPIRATOR DESIGNED SO THE GUIDE PINS FIT INTO ALIGNMENT
HOLES ON THE ANGLE RAMP |
|
VP 178EJ |
96 SLANT TUBE ASPIRATOR WITH 20 GAUGE 316 S/S TUBING AND MOUNTING
ACCESSORIES FOR VP 179A PLATE REGISTRATION JIG |
|
VP 178J |
96 DEEP WELL PLATE ASPIRATOR WITH 42MM LONG 19 GAUGE TUBES MOUNTED ON A
VP 179A PLATE REGISTRATION JIG |
|
VP 178R |
ASPIRATION MANIFOLD WITH 96 STAINLESS STEEL 19 GAUGE TUBES THAT ARE
EXPOSED 14 MM. TUBES PRESSED THROUGH BASE AND PROTRUDE 0.99mm INSIDE
MANIFOLD DIMENSIONS ARE L 128.14MM X W 85.85MM X H 26.42MM. ALUMINUM TOP
PLATE HAS TAPED HOLES TO MOUNT TO ROBOT MOUNTING PLATES. |
|
VP 178R-1 |
Aspiration Manifold With 96 Stainless Steel 19 Gauge Tubes That Are
Exposed 13mm. Width And Length Conform To SBS Convention (Approx. 128 mm
x 85mm x 40mm). Aluminum Top Plate Has Taped Holes To Mount To Robot
Mounting Plates. (Base Mounting Plate Not Included). |
|
VP 178R-2-72 |
Aspiration Manifold With 72 Stainless Steel 19 Gauge Tubes That Are
Exposed 42mm. Aluminum Top Plate Has Tapped Holes To Mount To Robot
Mounting Plates. (Base Mounting Plate Not Included) |
|
VP 179A |
MICROPLATE X, Y AND Z POSITIONING JIG FOR 96 AND 384 ASPIRATION AND
DISPENSING MANIFOLDS |
|
VP 179BJ |
384 STANDARD MICROPLATE ASPIRATOR WITH 13 MM LONG 23 GAUGE 316 S/S
TUBES, MOUNTS TO A VP 179A JIG |
|
VP 179BJD |
384 STANDARD MICROPLATE DISPENSER WITH 13 MM LONG 23 GAUGE 316 S/S
TUBES, MOUNTS TO A VP 179A JIG |
|
VP 179BJD-PLUS |
384 STANDARD MICROPLATE DISPENSER WITH 13 MM LONG 23 GAUGE 316 S/S
TUBES, MOUNTS TO A VP 179A JIG, PLUS A BOTTLE TOP DISPENSER |
|
VP 179CJ |
384 STANDARD MICROPLATE ASPIRATOR WITH 13 MM LONG 20 GAUGE 316 S/S
TUBES, MOUNTS TO A VP 179A JIG |
|
VP 179-VPREP |
VELOCITY 11 MOUNTING PLATE ATTACHED TO A 384 STANDARD MICROPLATE
ASPIRATOR WITH 13 MM LONG 23 GAUGE 316 S/S TUBES |
|
VP 180 |
8 CHANNEL MANIFOLD - 96 WELL FORMAT, 19 GAUGE NEEDLES 14mm LONG |
|
VP 180A |
8 CHANNEL MANIFOLD WITH 19 GAUGE NEEDLES 30mm LONG |
|
VP 180B |
8 CHANNEL MANIFOLD WITH 19 GAUGE NEEDLES 63.5mm LONG |
|
VP 180I |
8 CHANNEL MANIFOLD - 96 WELL FORMAT, 19 GAUGE NEEDLES 7mm LONG |
|
VP 180P |
8 CHANNEL MANIFOLD WITH POLYPROPYLENE BARREL, SCREW IN FEMALE LUER AND
19 GAUGE NEEDLES 14mm LONG, SOLVENT RESISTANT AND AUTOCLAVABLE |
|
VP 180PA |
8 CHANNEL MANIFOLD WITH POLYPROPYLENE BARREL, SCREW IN FEMALE LUER AND
19 GAUGE NEEDLES 30mm LONG, SOLVENT RESISTANT AND AUTOCLAVABLE |
|
VP 180PB |
8 CHANNEL MANIFOLD WITH POLYPROPYLENE BARREL, SCREW IN FEMALE LUER AND
19 GAUGE NEEDLES 63.5mm LONG, SOLVENT RESISTANT AND AUTOCLAVABLE |
|
VP 180S |
ADJUSTABLE ALUMINUM SLIDE, 9 MM X 9 MM X 72 MM FOR 8 CHANNEL MANIFOLDS,
WITH NYLON SET SCREWS, |
|
VP 181 |
6 CHANNEL MANIFOLD - 48 WELL FORMAT, 19 GAUGE NEEDLES, 13.4 mm CENTER TO
CENTER SPACING, 19 mm LONG |
|
VP 182 |
6 CHANNEL MANIFOLD - 24 WELL FORMAT, 19 GAUGE NEEDLES, 19mm LONG, 20mm
CENTER TO CENTER SPACING |
|
VP 182C |
6 CHANNEL MANIFOLD - 24 WELL FORMAT, 19 GAUGE NEEDLES, 49mm LONG, 20mm
CENTER TO CENTER SPACING, FOR COSTAR #3524 PLATES |
|
VP 182D |
4-Channel Manifold - 24 Well Format, 19 Gauge Needles, 49mm Long, 20mm
Center To Center Spacing, For Costar #3524 Plates. Price each |
|
VP 182DP |
5 CHANNEL MANIFOLD - 20 WELL FORMAT, 19 GAUGE NEEDLES, 65mm LONG, 15mm
CENTER-TO-CENTER SPACING, POLYPROPYLENE BARREL, PRICE EACH |
|
VP 182DP-1 |
5 CHANNEL MANIFOLD with female luer - 20 WELL FORMAT, 19 GAUGE NEEDLES,
65mm LONG, 15mm CENTER-TO-CENTER SPACING, POLYCARBONATE BARREL |
|
VP 182E |
6 channel manifold with female luer, 19 gauge needles, 14 mm long, 20
mm center to center spacing |
|
VP 182F |
6 channel manifold, with female luer 19 gauge needles, 65 mm long, 20 mm
center to center spacing |
|
VP 183 |
4 CHANNEL WAND-96 WELL FORMAT, 20 GAUGE NEEDLES, 9 mm SPACING. 14 mm
LONG |
|
VP 184 |
8 CHANNEL WAND-96 WELL FORMAT, 20 GAUGE NEEDLES, 9 mm SPACING, 14 mm
LONG |
|
VP 185-1 |
12 CHANNEL WAND-96 WELL FORMAT, 20 GAUGE NEEDLES, 9 mm SPACING, 14 mm
LONG |
|
VP 185BP |
12 CHANNEL WAND - 96 WELL FORMAT, POLYPROPYLENE BARREL, 46mm LONG
NEEDLES |
|
VP 185L |
12 CHANNEL WAND-96 WELL FORMAT LUER LOK, 130 MM LONG MANIFOLD, 21 GAUGE
NEEDLES, 9 mm SPACING, 11 mm LONG |
|
VP 185LA |
12 CHANNEL WAND-96 WELL FORMAT LUER LOK, 130 MM LONG MANIFOLD, 20 GAUGE
NEEDLES 11 MM LONG |
|
VP 186L |
24 CHANNEL WAND-384 WELL FORMAT LUER LOK, 21 GAUGE NEEDLES, 4.5 mm
SPACING, 11 mm LONG |
|
VP
186LB |
384 CHANNEL MANIFOLD ASPIRATION DEVICE AND REGISTRATION SYSTEM |
|
VP 186LP |
24 CHANNEL WAND - 384 WELL FORMAT, POLYPROPYLENE BARREL, 11mm LONG 21
GAUGE NEEDLES, MULTI-SPENSE LOCATING PINS, AND FEMALE LUER FITTING |
|
VP 187 |
12 CHANNEL MANIFOLD - 96 WELL FORMAT, 19 GAUGE NEEDLES, 9 mm SPACING,
14mm LONG NEEDLES |
|
VP 187A |
12 CHANNEL MANIFOLD - 35mm CHANNELS - 96 WELL FORMAT |
|
VP 187B |
12 CHANNEL MANIFOLD - 44mm CHANNELS - 96 WELL FORMAT |
|
VP 187BP |
12 CHANNEL MANIFOLD - 30mm CHANNELS - 96 WELL FORMAT, POLYPROPYLENE
BARREL |
|
VP 187BP-60 |
12 CHANNEL MANIFOLD - 60mm CHANNELS - 96 WELL FORMAT, POLYPROPYLENE
BARREL |
|
VP 187C |
12 CHANNEL MANIFOLD - 49mm CHANNELS - 96 WELL FORMAT |
|
VP 187D |
12 CHANNEL MANIFOLD - 7mm CHANNELS - 96 WELL FORMAT |
|
VP 187S |
ADJUSTABLE ALUMINUM SLIDE, 9 MM X 9 MM X 108 MM FOR 12 CHANNEL
MANIFOLDS, WITH NYLON SET SCREWS, |
|
VP 188 |
8 CHANNEL MANIFOLD - 48 WELL FORMAT, 19 GAUGE NEEDLES, 19 mm LONG,
13.4mm CENTER TO CENTER SPACING FOR COSTAR 3548 PLATES |
|
VP 188A |
8 CHANNEL MANIFOLD - 48 WELL FORMAT, 19 GAUGE NEEDLES, 49mm LONG, 13.4mm
CENTER TO CENTER SPACING FOR COSTAR 3548 PLATES |
|
VP 188B |
8 CHANNEL MANIFOLD - 48 WELL FORMAT, 19 GAUGE NEEDLES, 32mm LONG, 13.4mm
CENTER TO CENTER SPACING |
|
VP 189L |
16 CHANNEL WAND - 384 WELL FORMAT LUER LOK, 21 GAUGE NEEDLES, 11mm
EXPOSED NEEDLE LENGTH |
|
VP 189LP |
16 CHANNEL WAND - 384 WELL FORMAT, POLYPROPYLENE BARREL, 11mm LONG 21
GAUGE NEEDLES, FEMALE LUER FITTING |
|
VP 189M |
16 CHANNEL POLYCARBONATE MANIFOLD - 384 WELL FORMAT, FEMALE LUER LOK, 20
GAUGE NEEDLES, 4.5 MM SPACING, 14 MM LONG |
|
VP 190P |
32 CHANNEL WAND - 1536 WELL FORMAT, HOSE BARB CONNECTION, POLYPROPYLENE
BARREL, 23 GAUGE NEEDLES, 2.25 mm SPACING, 7 mm LONG |
|
VP 191L |
48 CHANNEL POLYCARBONATE WAND - 1536 WELL FORMAT LUER LOK, 23 GAUGE
NEEDLES, 2.25 mm SPACING, 11 mm LONG |
|
VP 195 |
MULTI-SPENSE BASE AND HOOD |
|
VP
195-1 |
MULTI-SPENSE BASE AND HOOD FOR VP 195L |
|
VP 195-2 |
MULTI-SPENSE TOWERS FOR DEEP WELL MICROPLATES |
|
VP
195-3 |
MULTI-SPENSE TOWERS FOR REGULAR MICROPLATES |
|
VP 195A |
MULTI-SPENSE FOR 384 WELL PLATES |
|
VP 195B |
MULTI-SPENSE FOR 96 WELL PLATES |
|
VP 195C |
HOSE SYSTEM FOR MULTI-SPENSE VP 195A, VP 195B, AND VP 195L |
|
VP 195C1 |
HOSE SYSTEM FOR DEEP WELL MULTI-SPENSE VP 195J |
|
VP 195CA |
TUBING CONNECTOR TO BOTTLE TOP DISPENSER |
|
VP 195D-1 |
DISPENSER - CHEMPETTE 2-10ml |
|
VP
195E |
DISPENSER - CHEMPETTE .2-1ml |
|
VP 195J |
MULTI-SPENSE FOR 96 DEEP WELL PLATES |
|
VP 195K |
DISPENSER - 10-59ml |
|
VP 195L |
MULTI-SPENSE FOR 1,536 WELL PLATES |
|
VP 224S5 |
24 PIN DEEP WELL REPLICATOR |
|
VP 224A |
MULTI-BLOT REPLICATOR - 24 GROOVED PINS, 57mm LONG - TO DELIVER 50ml |
|
VP 224B |
MULTI-BLOT REPLICATOR - 24 GROOVED PINS, 57mm LONG - TO DELIVER 90ml |
|
VP 224FP6 |
MULTI-BLOT REPLICATOR - 24 SOLID PINS , 17 MM LONG - 1.58 MM DIAMETER
FOR WOUND HEALING EXPERIMENTS |
|
VP 240 |
MANUAL ADAPTOR FOR DISPOSABLE STANDARD HEIGHT PIN TOOLS, WITH SHORT
GUIDE PINS |
|
VP 240A |
MANUAL ADAPTOR FOR DISPOSABLE DEEP WELL 96 PIN TOOLS, WITH LONG GUIDE
PINS |
|
VP 240R |
ADAPTOR FOR DISPOSABLE STANDARD HEIGHT AND DEEP WELL PIN TOOLS, ROBOT
VERSION |
|
VP 242 |
LOADING JIG FOR DISPOSABLE STANDARD HEIGHT AND DEEP WELL PIN TOOLS,
MANUAL VERSION |
|
VP 242A |
Loading Jig For Disposable Deep Well Pin Tools, Manual Version. |
|
VP 242R |
LOADING JIG FOR DISPOSABLE STANDARD HEIGHT AND DEEP WELL PIN TOOLS,
ROBOT VERSION |
|
VP 244 |
LIBRARY COPIER FOR DISPOSABLE STANDARD HEIGHT PIN TOOLS |
|
VP 244A |
LIBRARY COPIER FOR DISPOSABLE DEEP WELL PIN TOOLS |
|
VP 245R |
EJECTOR MECHANISM FOR REMOVING DISPOSABLE PIN TOOL FROM VP 240R ADAPTOR |
|
VP 246 |
STERILE DISPOSABLE 96 POLYPROPYLENE PIN TOOL FOR STANDARD PLATES,
120/CASE |
|
VP 246A |
STERILE DISPOSABLE 96 POLYPROPYLENE PIN TOOL FOR DEEP WELL PLATES,
72/CASE |
|
VP 248 |
DISPOSABLE 384 POLYPROPYLENE PIN TOOL FOR STANDARD PLATES, 120/CASE |
|
VP 324 |
VARIOMAG MONOSHAKE FOR MIXING 96 AND 384 WELL MICROPLATES |
|
VP 326 |
VARIOMAG SHAKER FOR 1,536 MICROPLATES |
|
VP 326A |
Microplate Orbital Shaker Two-speed Potentiometer Settings, Simple
Switch or Relay Activation. 0.5, 1 or 2 mm Orbital Shaking Motion for
96, 384 or 1536 Microplates, Speeds from 60 to 3570 RPM. |
|
VP 333 |
MICROPLATE VIBRATOR FOR MAGNETIC BEAD CONCENTRATION |
|
VP 371 |
WOOD TOOTHPICKS - 1,200 PKG |
|
VP 372 |
PLASTIC TOOTHPICKS - 5,000/PKG |
|
VP 373 |
COLONY PICKER |
|
VP 374 |
RACK FOR COLONY PICKER AND STANDARD MICROPLATE |
|
VP 374A |
RACK FOR COLONY PICKER AND DEEP WELL MICROPLATE |
|
VP 376 |
96 HOLE TOOTHPICK HOLDER |
|
VP 378 |
48 HOLE TOOTHPICK HOLDER |
|
VP 379 |
384 HOLE TOOTHPICK HOLDER |
|
VP 379G |
384 HOLE TOOTHPICK HOLDER FOR GENETIXS PLATES |
|
VP 380 |
COLONY COPIER - REGISTERS REPLICATOR TO OMNI TRAY |
|
VP 380D |
COLONY COPIER - 4x4 HIGH DENSITY ARRAY |
|
VP 380DN |
FP SERIES COLONY COPIER - 4x4 HIGH DENSITY ARRAY. FOR REGISTERING 96 PIN
FP1 FLOATING REPLICATORS TO 1536 WELL MICROPLATES |
|
VP
381 |
LIBRARY COPIER - REGISTERS REPLICATOR TO MICROPLATES |
|
VP
381-24 |
Library Copier to register 24 pin replicators to 24 well microplates and
also well centers of CoStar 24 well microplates. |
|
VP 381A |
LIBRARY COPIER - REGISTERS DEEP WELL REPLICATOR TO DEEP WELL MICROPLATES |
|
VP 381A-1 |
VP 381 Mounted On Deep Well Microplate Legs. Accommodates Standard
Multi-Blot Replicators To Deep Well Microplates. |
|
VP 381B |
LIBRARY COPIER - REGISTERS DEEP WELL REPLICATOR TO MICROPLATES |
|
VP 381C |
LIBRARY COPIER - REGISTERS 48 PIN REPLICATOR TO MICROPLATES |
|
VP 381D |
HIGH THROUGHPUT LIBRARY COPIER - REGISTERS MULTI-BLOT REPLICATORS TO 96
& 384 WELL MICROPLATES |
|
VP 381D-N |
HIGH THROUGHPUT LIBRARY COPIER™ REGISTERS ALL 17 mm TUBE STYLE
MULTI-BLOT™ REPLICATORS TO 96, 384 AND 1536 WELL MICROPLATES |
|
VP 381E |
GUIDE SYSTEM TO HOLD 96 WELL MICROPLATE AND LIFESEP MAGNET BLOCK AT AN
ANGLE AND ALIGN THE SLANT TUBE ASPIRATION SYSTEM |
|
VP 381F |
LIBRARY COPIER - FOR 1536 MICROPLATES WITH VP 838FP1 SERIES MULTI-BLOT
REPLICATORS |
|
VP 381G |
ADJUSTIBLE FP SERIES LIBRARY COPIER - FOR REGISTERING ALL FP1, FP3 AND
FP9 SERIES FLOATING REPLICATOR TO 1536 WELL SBS STANDARD MICROPLATES |
|
VP 381H |
Library Copier to register 96 pin replicators to well centers of 96 well
microplates. |
|
VP 381M |
LIBRARY COPIER - REGISTERS STANDARD MULTI-BLOT REPLICATOR TO 96 & 384
"MIDI" MICROPLATES (2.5 CM TALL) |
|
VP 381N |
FP SERIES LIBRARY COPIER - FOR REGISTERING ALL FP1, FP3 AND FP9 SERIES
FLOATING REPLICATOR TO 96, 384 AND 1536 WELL SBS STANDARDS MICROPLATES |
|
VP 381NA |
1536 LIBRARY COPIER TO REGISTER 8 ROWS OF 48 PINS TO A 1536 MICROPLATE |
|
VP 381NAB |
1536 LIBRARY COPIER TO REGISTER 1 ROW OF 48 PINS TO A 1536 MICROPLATE |
|
VP 381NW |
MONO LAYER WOUNDING LIBRARY COPIER™ -FOR REGISTERING ALL FP, FP1, FP3,
FP4, FP8, FP6 AND FP9 SERIES FLOATING MULTI-BLOT™ REPLICATORS TO
STANDARD 96 AND 384 MICROPLATES |
|
VP 381NW4.5 |
LIBRARY COPIER WITH MODIFIED ALIGNMENT HOLE SLOTS 1.9mm WIDE AND 4.50mm
LONG FOR WOUNDING TISSUE CULTURE MONOLAYERS IN 96 WELL MICROPLATES |
|
VP 381NW5 |
LIBRARY COPIER WITH MODIFIED ALIGNMENT HOLE SLOTS 1.7mm WIDE AND 5.0mm
LONG FOR MAKING 0.38MM BY 3.8 MM LONG WOUNDS IN TISSUE CULTURE
MONOLAYERS IN 96 WELL MICROPLATES |
|
VP 381NW5-V |
LIBRARY COPIER WITH MODIFIED ALIGNMENT HOLE SLOTS 1.7mm WIDE AND 5.0mm
LONG FOR MAKING 0.38mm BY 3.8mm LONG VERTICAL WOUNDS IN TISSUE CULTURE
MONOLAYERS IN 96 WELL MICROPLATES |
|
VP 381NWGV4.5 |
Library Copier With Modified Alignment Hole Slots 1.9mm Wide And 4.5mm
Long and with X and Y Base Adjustment Features For Wounding Tissue
Culture Monolayers In 96 Well Microplates. |
|
VP 381NWYR1.7 |
Polypropylene registration frame system designed to make a 1.7 mm long
wound in a tissue culture monolayer grown in 384 well Microplates using
a 96 pin wounding pin tool. Consists of left and right handed versions |
|
VP 381O |
REFORMATOR - REGISTERS 384 WELL PLATES SO THEY CAN BE ACCESSED BY 96,
PIPPETORS, PIN TOOLS OR ASPIRATORS, MANUALLY OPERATED |
|
VP 381V |
LIBRARY COPIER - FOR VICKI REGISTRATION SYSTEM |
|
VP 381W-24 |
MONO LAYER WOUNDING LIBRARY COPIER™ -FOR REGISTERING FP AND FP6 SERIES
FLOATING MULTI-BLOT™ REPLICATORS TO STANDARD 24 MICROPLATES |
|
VP 382 |
MULTI-PRINT - REGISTERS REPLICATOR TO LARGE MEMBRANES, 3x3 ARRAY FOR 96
PIN & 2X2 ARRAY FOR 384 PIN REPLICATOR |
|
VP
382B |
MULTI-PRINT - REGISTERS REPLICATOR TO MEMBRANE, 4x4 ARRAY FOR 96 PIN
REPLICATOR |
|
VP 382CS |
REGISTRATION DEVICE - FOR CLONESAVER 96 CARD |
|
VP
382D |
MULTI-PRINT - REGISTERS REPLICATOR TO LARGE MEMBRANES, 3x3 ARRAY & 2X2
ARRAY FOR 96 PIN REPLICATOR |
|
VP 382F |
MULTI-PRINT - FOR FU-MEEI REGISTRATION SYSTEM - 1 ALIGNMENT HOLE |
|
VP
382F1 |
MULTI-PRINT - FOR FU-MEEI REGISTRATION SYSTEM - 2x2 ARRAY FOR 384 PIN
REPLICATOR |
|
VP
382F2 |
MULTI-PRINT - FOR FU-MEEI REGISTRATION SYSTEM - 3x3 ARRAY FOR 96 PIN
REPLICATOR |
|
VP
382F3 |
MULTI-PRINT - FOR FU-MEEI REGISTRATION SYSTEM - 4x4 ARRAY FOR 96 PIN
REPLICATOR |
|
VP 384 |
MULTI-BLOT REPLICATOR - 384 PINS, 22mm LONG, DELIVERS ~.2ul |
|
VP 384AM |
MULTI-BLOT REPLICATOR - 384 MAGNETIC PINS - 57mm LONG |
|
VP 384F |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-384 FP SLOT PINS, 0.062"
DIAMETER, SINGLE FLOAT PLATE |
|
VP 384FS.5 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-384 FP 0.5 UL SLOT PINS,
0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 384FS |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-384 FP 1 UL SLOT PINS,
0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 384FS2 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-384 FP 2 UL SLOT PINS,
0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 384FS5 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-384 FP 5 UL SLOT PINS,
0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 384FP1 |
384 FLOATING TUBE PIN REPLICATOR - 0.457mm PIN DIAMETER, 17mm LONG,
DELIVERS ~20nl |
|
VP 384FP3 |
384 FLOATING TUBE PIN REPLICATOR - 0.787mm PIN DIAMETER, 17mm LONG,
DELIVERS ~80nl |
|
VP 384FP4 |
384 FLOATING TUBE PIN REPLICATOR - 0.914mm PIN DIAMETER, 17mm LONG,
DELIVERS ~110nl |
|
VP 384FP6 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-384 FP6 PINS, 0.062"
DIAMETER, SINGLE FLOAT PLATE |
|
VP 384FP6S.5 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-384 FP6 0.5 UL SLOT PINS,
0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 384FP6S |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-384 FP6 1 UL SLOT PINS,
0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 384FP6S2 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-384 FP6 2 UL SLOT PINS,
0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 384FP6S5 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-384 FP6 5 UL SLOT PINS,
0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 384FP8 |
384 FLOATING TUBE PIN REPLICATOR - 0.356mm PIN DIAMETER, 17mm LONG,
DELIVERS ~12nl |
|
VP 384FP9 |
384 FLOATING TUBE PIN REPLICATOR - 0.229mm PIN DIAMETER, 17mm LONG,
DELIVERS ~4nl |
|
VP 384M |
MULTI-BLOT REPLICATOR WITH 384 MAGNETIC PINS FOR STIRRER EXTRACTION |
|
VP 384S |
MULTI-BLOT REPLICATOR - 384 1ul-SLOT PINS, 1.58mm PIN DIAMETER, 22mm
LONG |
|
VP 384S.5 |
MULTI-BLOT REPLICATOR - 384 0.5ul-SLOT PINS, 1.58mm PIN DIAMETER, 22mm
LONG |
|
VP 384S.5a |
MULTI-BLOT REPLICATOR - 384 0.5ul-SLOT PINS, 1.58mm PIN DIAMETER, 45mm
LONG |
|
VP 384S2 |
MULTI-BLOT REPLICATOR - 384 2ul-SLOT PINS, 1.58mm PIN DIAMETER, 22mm
LONG |
|
VP 384S2a |
MULTI-BLOT REPLICATOR - 384 2ul-SLOT PINS, 1.58mm PIN DIAMETER, 45mm
LONG |
|
VP 384Sa |
MULTI-BLOT REPLICATOR - 384 1ul-SLOT PINS, 1.58mm PIN DIAMETER, 45mm
LONG |
|
VP 385 |
REGISTRATION GUIDE FOR BLOTTING SMALL MEMBRANES WITH A MULTI-BLOT
REPLICATOR |
|
VP 386 |
MULTI-BLOT REPLICATOR - 384 PINS - DELIVERS ~.1ul |
|
VP 386H |
MULTI-BLOT REPLICATOR - 384 HYDROPHOBIC PINS - DELIVERS ~0.1ul |
|
VP 386V |
VICKI SPRING LOADED MULTI-BLOT REPLICATOR HOUSING |
|
VP 386VF |
VICKI WINDOW FRAME ALIGNMENT REGISTRATION SYSTEM |
|
VP
386VR |
VICKI 384 PIN REPLICATOR - 0.787mm PIN DIAMETER, DELIVERS ~70nl |
|
VP
386VR1 |
VICKI 384 PIN REPLICATOR - 0.457mm PIN DIAMETER, DELIVERS ~20nl |
|
VP 402 |
MULTI-BLOT REPLICATOR - 96 PINS - DELIVERS ~3.0 ul HANGING DROP |
|
VP 402-P11AS25 |
MULTI-BLOT REPLICATOR - 96 PINS, 25ul SLOT PINS, 4.75 mm DIAMETER, 45 mm
LONG, |
|
VP 403 |
CUSTOM REPLICATORS |
|
VP 403A |
REPLICATOR/DILUTER - 96 DUAL GROOVED PINS - DELIVERS ~7ul |
|
VP 403B |
REPLICATOR/DILUTER - 96 DUAL GROOVED PIN - DELIVERS ~5ul |
|
VP 403D1 |
REPLICATOR/DILUTER - 96 SINGLE GROOVED PINS - 22mm LONG - DELIVERS ~3ul |
|
VP 403D2 |
REPLICATOR/DILUTER - 96 DUAL GROOVED PINS - 22mm LONG - DELIVERS ~5ul |
|
VP 403E |
REPLICATOR/DILUTER - 96 FIVE GROOVED - 22mm LONG - DELIVERS ~20ul |
|
VP 403F |
REPLICATOR/DILUTER - 96 TWO GROOVED - 41mm LONG - DELIVERS ~6ul |
|
VP 404 |
REPLICATOR - 96 BOLTS - DELIVERS ~10ul |
|
VP 404A |
REPLICATOR - 48 BOLTS - 96 WELL FORMAT- DELIVERS ~10ul |
|
VP 404B |
REPLICATOR - 96 LONG BOLT - BOLTS 53mm LONG |
|
VP 405 |
REPLICATOR - 96 BOLTS - DELIVERS ~20ul |
|
VP 406 |
REPLICATOR - 96 BOLTS - DELIVERS ~50ul |
|
VP 407 |
MULTI-BLOT REPLICATOR - 96 PINS - 2.36mm PIN DIAMETER, 22mm LONG,
DELIVERS ~1.5ul HANGING DROP |
|
VP 407A |
MULTI-BLOT REPLICATOR - 96 PINS - 3.15mm PIN DIAMETER, 22mm LONG,
DELIVERS ~3ul HANGING DROP |
|
VP 407AFP13 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-96 FP13 PINS, 3.18mm PIN
DIAMETER, SINGLE 9.7 MM THICK FLOAT PLATE |
|
VP 407AH |
48 PIN REPLICATOR - 48 PINS on 9mm CENTERS - 3.15mm PIN DIAMETER, 22mm
LONG, DELIVERS ~3ul HANGING DROP |
|
VP 407AHFP13 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-48 FP13 PINS, 3.18mm PIN
DIAMETER, SINGLE 9.7 MM THICK FLOAT PLATE |
|
VP 407AM |
MULTI-BLOT DEEP WELL REPLICATOR - 96 MAGNETIC PINS FOR STIRRER
EXTRACTION, 2.36mm PIN DIAMETER, 57mm LONG |
|
VP 407BM |
MULTI-BLOT 4 ML DEEP WELL REPLICATOR - 96 MAGNETIC PINS FOR STIRRER
EXTRACTION, 2.36mm PIN DIAMETER, 121mm LONG |
|
VP 407FP12 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-96 FP12 PINS, 2.36mm PIN
DIAMETER, SINGLE 9.7 MM THICK FLOAT PLATE |
|
VP 407M |
MULTI-BLOT REPLICATOR - 96 MAGNETIC PINS FOR STIRRER EXTRACTION, 2.36mm
PIN DIAMETER, 22mm LONG |
|
VP 407R |
96 PIN MULTI-BLOT REPLICATOR, 0.091" DIAMETER PIN, ROUND END, 0.876"
LONG, BURIED 0.200" IN A SMALL EARED ALUMINUM BASE "SUPER FLY SQUISHER" |
|
VP 408 |
MULTI-BLOT REPLICATOR - 96 PINS - DELIVERS ~.2ul |
|
VP 408A |
MULTI-BLOT DEEP WELL REPLICATOR - 96 PINS - 57mm LONG |
|
VP 408AF |
MULTI-BLOT FLOATING REPLICATOR - 96 LONG PINS |
|
VP 408AM |
MULTI-BLOT DEEP WELL REPLICATOR - 96 MAGNETIC PINS FOR STIRRER
EXTRACTION |
|
VP 408B |
MULTI-BLOT - 96 PIN DEEP WELL GROOVED REPLICATOR - 57mm LONG |
|
VP 408FH |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-96, POINT TIP FP PINS,
0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 408FS |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-96, POINTED TIP FPS 1 UL
SLOT PINS, 0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 408FS.5 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-96, POINTED TIP FPS.5 - 0.5
UL SLOT PINS, 0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 408FS2 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-96, POINTED TIP FPS2 - 2 UL
SLOT PINS, 0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 408FS5 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-96, POINTED TIP FPS5 - 5 UL
SLOT PINS, 0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 408FS2AS |
FROZEN SPECIMEN SAMPLING REPLICATOR, 96 SPRING LOADED E-CLIP FLOATING
2ul SLOT PIN REPLICATOR - 30mm EXPOSED PIN LENGTH, WITH GUIDE PINS |
|
VP
408FS2AS-1 |
Frozen Specimen Sampling Replicator, 96 Spring Loaded E-Clip Floating
2ul Slot Pin Replicator - 45mm Exposed Pin Length, With Guide Pins |
|
VP 408FP6 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-96 FLAT TIP FP6 PINS, 0.062"
DIAMETER, SINGLE FLOAT PLATE |
|
VP 408FP6S.5 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-96 FLAT TIP FP6S.5 - 0.5 UL
SLOT PINS, 0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 408FP6S |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-96 FLAT TIP FP6S - 1 UL SLOT
PINS, 0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 408FP6S2 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-96 FLAT TIP FP6S2 - 2 UL
SLOT PINS, 0.062" DIAMETER, SINGLE FLOAT PLATE. |
|
VP 408FP6S5 |
MULTI-BLOT FLOATING E-CLIP STYLE REPLICATOR-96 FLAT TIP FP6S5 - 5 UL
SLOT PINS, 0.062" DIAMETER, SINGLE FLOAT PLATE |
|
VP 408H |
48 PIN REPLICATOR - 48 PINS on 9mm CENTERS - 1.58mm PIN DIAMETER, 22mm
LONG, DELIVERS ~250nl HANGING DROP |
|
VP 408HA |
48 PIN REPLICATOR - 48 PINS on 9mm CENTERS - 1.58mm PIN DIAMETER, 57mm
LONG, DELIVERS ~250nl HANGING DROP |
|
VP 408HY |
MULTI-BLOT REPLICATOR - 96 HYDROPHOBIC PINS - 1.58mm PIN DIAMETER, 22mm
LONG - DELIVERS ~2ul |
|
VP 408M |
MULTI-BLOT REPLICATOR WITH 96 MAGNETIC PINS FOR STIRRER EXTRACTION |
|
VP 408S |
MULTI-BLOT REPLICATOR - 96 1ul-SLOT PINS - 1.58mm PIN DIAMETER, 22mm
LONG |
|
VP 408S.5 |
MULTI-BLOT REPLICATOR - 96 0.5ul-SLOT PINS - 1.58mm PIN DIAMETER, 22mm
LONG |
|
VP 408S.5a |
MULTI-BLOT REPLICATOR - 96 0.5ul-SLOT PINS - 1.58mm PIN DIAMETER, 45mm
LONG |
|
VP 408S10 |
MULTI-BLOT REPLICATOR - 96 10ul-SLOT PINS - 3.15mm PIN DIAMETER, 22mm
LONG |
|
VP 408S2 |
MULTI-BLOT REPLICATOR - 96 2ul-SLOT PINS - 1.58mm PIN DIAMETER, 22mm
LONG |
|
VP 408S2a |
MULTI-BLOT REPLICATOR - 96 2ul-SLOT PINS - 1.58mm PIN DIAMETER, 45mm
LONG |
|
VP 408S5 |
MULTI-BLOT REPLICATOR - 96 5ul-SLOT PINS - 1.58mm PIN DIAMETER, 22mm
LONG |
|
VP 408S5a |
MULTI-BLOT REPLICATOR - 96 5ul-SLOT PINS - 1.58 PIN DIAMETER, 45mm LONG |
|
VP 408S5L |
MULTI-BLOT REPLICATOR - 96 5ul-SLOT PINS - 3.15mm PIN DIAMETER, 22mm
LONG |
|
VP 408Sa |
MULTI-BLOT REPLICATOR - 96 1ul-SLOT PINS - 1.58mm PIN DIAMETER, 45mm
LONG |
|
VP 409 |
MULTI-BLOT REPLICATOR - 96 PINS - 1.19mm PIN DIAMETER, 22mm LONG -
DELIVERS ~.1ul |
|
VP 409-48 |
VP 409 Multi-Blot Replicator with every other column filled with forty
eight 1.19 mm diameter pins, 22 mm long - Delivers ~0.1ul |
|
VP 409H |
MULTI-BLOT REPLICATOR - 96 HYDROPHOBIC PINS - DELIVERS ~.1ul |
|
VP 410A |
96 BEVEL PIN PIERCING HEAD WITH 2mm DIAMETER BEVEL PINS |
|
VP
410B |
192 BEVEL PIN PIERCING HEAD FOR 384 WELL PLATES |
|
VP 410C |
384 BEVEL PIN PIERCING HEAD, 2mm DIAMETER PINS |
|
VP 410E |
192 BEVEL PIN PIERCING HEAD WITH 2mm DIAMETER BEVEL PINS ON 4.5mm
CENTERS IN ONE AXIS AND 9mm CENTERS IN THE OTHER |
|
VP 410F |
96 BEVEL PIN PIERCING HEAD WITH 4.75mm DIAMETER BEVEL PINS |
|
VP
410G |
96 BEVEL PIN PIERCING HEAD WITH 4mm DIAMETER BEVEL PINS |
|
VP 410H |
96 BEVEL PIN PIERCING HEAD WITH 3.18mm DIAMETER BEVEL PINS |
|
VP 410M |
ARBOR PRESS AND MOUNTING STATION FOR ALL OF THE V&P PIERCING HEADS |
|
VP 412 |
PYREX CULTURE DISH - 23cm x 33cm x 5cm |
|
VP 413 |
NALGE NUNC - OMNI TRAY WITH LID - STERILE - CASE OF 60 |
|
VP 413A |
ALUMINUM OMNI TRAY FLATTENER, PLACED UNDERNEATH OMNI TRAY TO REDUCE
POTENTIAL UNEVENESS OF THE WELL BOTTOM |
|
VP 414 |
NALGE NUNC - 384 WELL PLATE WITH LID - STERILE - BULK PACK - CASE OF 30 |
|
VP 415 |
NALGE NUNC - 384 WELL PLATE WITH LID - STERILE -INDIVIDUAL PACK - CASE
OF 30 |
|
VP 415PP |
384 WELL PLATE, 0.058 ML, SQUARE WELL, SPHERICAL BOTTOM, POLYPROPYLENE,
60/CASE |
|
VP 416 |
NALGE NUNC - 96 WELL PLATE WITH LID - STERILE - INDIVIDUAL PACK - CASE
OF 50 |
|
VP 416-AL |
96 WELL STRAIGHT WALLED ALUMINUM PLATE MODELED AFTER THE BD U BOTTOM
#353910, HYDROPHILIC COATED |
|
VP 416-ALB-20 |
VP 416-ALB-20 - Aluminum 20 position insert for heating and mixing
on Tumble Stirrer. Special
designed to minimize eddy currents. Holds 20 tubes or vials 16.5 mm in
diameter. SBS footprint, price each. |
|
VP 416-ALB-24 |
VP 416-ALB-24 - Aluminum 24 position insert for heating and mixing
on Tumble Stirrer. Special
designed to minimize eddy currents. Holds 24 tubes or vials 15 mm in diameter. SBS footprint, price each. |
|
VP 416-ALB-30 |
VP 416-ALB-30 - Aluminum 30 position insert for heating and mixing
on Tumble Stirrer.Special designed to
minimize eddy currents. Holds 30 microcentrifuge tubes 10.5 mm in
diameter. SBS footprint price each. |
|
VP 416-ALB-48 |
VP 416-ALB-48 - Aluminum 48 position insert for heating and mixing
on Tumble Stirrer. Special
designed to minimize eddy currents. Holds 48 glass tubes or vials 11.8 mm in
diameter . SBS footprint, Price each. |
|
VP 416-ALB-96 |
VP 416-ALB-96 - Aluminum 96 position insert for heating and mixing
on Tumble Stirrer. Special
designed to minimize eddy currents. Holds 96 glass tubes 8.5 mm in diameter. SBS footprint, price each. |
|
VP 416-ALB-LID |
|
|
VP 416-PTFE |
PTFE 96 STANDARD WELL, 0.35ml ROUND WELL MICROPLATE |
|
VP 416D-PTFE |
PTFE 96 DEEP WELL, 2.2ml ROUND WELL MICROPLATE |
|
VP 417-6 |
Vial rack made from HDPE and will accommodate 6 liquid scintillation vials or other vessels that have a diameter less than 27.9 mm. The depth of the hole is 24.9 mm. The racks dimensions are to the SBS standard. |
|
VP 417-11 |
VP 417-11 Product list - Vial rack made from HDPE (High Density PolyEthylene) and will accommodate 11 liquid scintillation vials or other vessels that have a diameter less than 27.9 mm. The depth of the hole is 24.9 mm. The racks dimensions are 127.76 mm long by 85.48 mm wide and 31.75 mm tall. |
|
VP 417-32 |
VP 417-32 Product list Vial Rack Made From Polypropylene For 13mm Diameter Vials (4ml Vials) - Holds 32 Vials, Rack Fits In Microplate Foot Print. |
|
VP 417-45 |
VP 417-45 Product list Vial Rack Made From Polypropylene For 12mm Diameter Vials (2ml Vials) - Holds 45 Vials, Rack Fits In Microplate Foot Print. |
|
VP 418-9 |
VP 418-9 Product list Vial rack made from HDPE and will accommodate 9 Fifty ml centrifuge tubes or other vessels that have a diameter less than 28.7 mm. |
|
VP 418-27 |
VP 418-27 Product list Vial rack made from HDPE (High Density PolyEthylene) and will accommodate 27 Fifteen ml centrifuge tubes or other vessels that have a diameter less than 16.2 mm. |
|
VP 418-32 |
VP 418-32 Product list Vial rack made from HDPE (High Density PolyEthylene) and will accommodate 32 micro centrifuge tubes 1.5 ml to 2 ml or other vessels that have a diameter less than 11 mm. |
|
VP 418-B |
VP 418-B Product list Base designed to hold and register the VP 418 series vial/tube racks to the deck of a Multi-Probe Workstation. The base is made of Delrin and will accommodate 2 of the VP 418 series vial/tube racks. |
|
VP 419-96A |
VP 419-96A Product list Vial rack made from HDPE (High Density PolyEthylene) and will accommodate 96 glass test tubes or other vessels that have a diameter less than 16.2 mm, tall version. |
|
VP 419-96B |
VP 419-96B Product list Vial rack made from HDPE (High Density PolyEthylene) and will accommodate 96 glass test tubes or other vessels that have a diameter less than 16.2 mm, short version. |
|
VP 420 |
PYREX ALCOHOL RESERVOIR WITH LID |
|
VP 421 |
PLASTIC BLEACH OR RINSE RESERVOIR - CASE OF 5 |
|
VP 425 |
PIN CLEANING BRUSH - 2.4cm BRISTLES |
|
VP 425A |
PIN CLEANING BRUSH FOR LONG PINS - 8.5cm BRISTLES |
|
VP 426 |
PIN TIP CLEANING PAD - 4mm BRISTLES |
|
VP 430 |
READING MATS FOR HIGH DENSITY ARRAYED BLOTS - 96 & 384 FORMATS |
|
VP
435 |
DOUBLE STICKY TAPE FOR MULTI-PRINT - 2 YARDS |
|
VP 438FP1 |
96 FLOATING TUBE PIN REPLICATOR - 0.457mm PIN DIAMETER, 17mm LONG,
DELIVERS ~20nl |
|
VP 438FP13 |
96 FLOATING E-CLIP PIN REPLICATOR - 3.14mm PIN DIAMETER, 23.5mm LONG,
DELIVERS ~3ml |
|
VP 438FP3 |
96 FLOATING TUBE PIN REPLICATOR - 0.787mm PIN DIAMETER, 17mm LONG -
DELIVERS ~80nl |
|
VP 438FP4 |
96 FLOATING TUBE PIN REPLICATOR - 0.914mm PIN DIAMETER, 17mm LONG -
DELIVERS ~110nl |
|
VP 438FP6 |
96 FLOATING E-CLIP PIN REPLICATOR - 1.58mm PIN DIAMETER, 22mm LONG,
DELIVERS ~360nl |
|
VP 438FP8 |
96 FLOATING TUBE PIN REPLICATOR - 0.356mm PIN DIAMETER, 17mm LONG -
DELIVERS ~12nl |
|
VP 438FP9 |
96 FLOATING TUBE PIN REPLICATOR - 0.229mm PIN DIAMETER, 17mm LONG -
DELIVERS ~4nl |
|
VP 440 |
FU-MEEI REGISTRATION SPINDLE PLATFORM |
|
VP 441 |
FU-MEEI REGISTRATION MEMBRANE PUNCH |
|
VP 450 |
FIXED REPLICATOR STRIP - 8 PIN, ~0.25ul HANGING DROP, 96 WELL FORMAT,
22mm PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 450A |
FIXED REPLICATOR STRIP - 8 PIN, ~0.25ul HANGING DROP, 96 WELL FORMAT,
57mm PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 450F |
FLOATING REPLICATOR STRIP - 8 PIN, ~0.25ul HANGING DROP, 96 WELL
FORMAT, 22mm PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 450FP1 |
FLOATING REPLICATOR STRIP - 8 PIN, ~20nl HANGING DROP, 96 WELL FORMAT,
17mm PIN LENGTH, 0.457mm PIN DIAMETER |
|
VP 450FP3 |
FLOATING REPLICATOR STRIP - 8 PIN, ~90nl HANGING DROP, 96 WELL FORMAT,
17mm PIN LENGTH, .78mm PIN DIAMETER |
|
VP 450FS.5 |
FLOATING REPLICATOR STRIP - 8 PIN, ~.5ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 450FS1 |
FLOATING REPLICATOR STRIP - 8 PIN, ~1ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 450FS2 |
FLOATING REPLICATOR STRIP - 8 PIN, ~2ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 450FS5 |
FLOATING REPLICATOR STRIP - 8 PIN, ~5ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 450P1 |
FIXED REPLICATOR STRIP - 8 PIN, ~20nl HANGING DROP, 96 WELL FORMAT, 14mm
PIN LENGTH, 0.457mm PIN DIAMETER |
|
VP 450P3 |
FIXED REPLICATOR STRIP - 8 PIN, ~90nl HANGING DROP, 96 WELL FORMAT, 14mm
PIN LENGTH, 0.78mm PIN DIAMETER |
|
VP 450S.5 |
FIXED REPLICATOR STRIP - 8 PIN, ~0.5ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 450S.5A |
FIXED REPLICATOR STRIP - 8 PIN, ~0.5ul SLOT, 96 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 450S1 |
FIXED REPLICATOR STRIP - 8 PIN, ~1ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 450S1A |
FIXED REPLICATOR STRIP - 8 PIN, ~1ul SLOT, 96 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 450S2 |
FIXED REPLICATOR STRIP - 8 PIN, ~2ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 450S2A |
FIXED REPLICATOR STRIP - 8 PIN, ~2ul SLOT, 96 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 450S5 |
FIXED REPLICATOR STRIP - 8 PIN, ~5ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 450S5A |
FIXED REPLICATOR STRIP - 8 PIN, ~5ul SLOT, 96 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 451 |
FIXED REPLICATOR STRIP - 12 PIN, ~0.25ul HANGING DROP, 96 WELL FORMAT,
22mm PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 451A |
FIXED REPLICATOR STRIP - 12 PIN, ~0.25ul HANGING DROP, 96 WELL FORMAT,
57mm PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 451F |
FLOATING REPLICATOR STRIP - 12 PIN, ~0.25ul HANGING DROP, 96 WELL
FORMAT, 22mm PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 451FP1 |
FLOATING REPLICATOR STRIP - 12 PIN, ~20nl HANGING DROP, 96 WELL FORMAT,
17mm PIN LENGTH, 0.457mm PIN DIAMETER |
|
VP 451FP3 |
FLOATING REPLICATOR STRIP - 12 PIN, ~90nl HANGING DROP, 96 WELL FORMAT,
17mm PIN LENGTH, 0.78mm PIN DIAMETER |
|
VP 451FS.5 |
FLOATING REPLICATOR STRIP - 12 PIN, ~0.5ul SLOT, 96 WELL FORMAT, 22mm
PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 451FS1 |
FLOATING REPLICATOR STRIP - 12 PIN, ~1ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 451FS2 |
FLOATING REPLICATOR STRIP - 12 PIN, ~2ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 451FS5 |
FLOATING REPLICATOR STRIP - 12 PIN, ~5ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 451P1 |
FIXED REPLICATOR STRIP - 12 PIN, ~20nl HANGING DROP, 96 WELL FORMAT,
14mm PIN LENGTH, 0.457mm PIN DIAMETER |
|
VP 451P3 |
FIXED REPLICATOR STRIP - 12 PIN, ~90nl HANGING DROP, 96 WELL FORMAT,
14mm PIN LENGTH, 0.78mm PIN DIAMETER |
|
VP 451S.5 |
FIXED REPLICATOR STRIP - 12 PIN, ~0.5ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 451S.5A |
FIXED REPLICATOR STRIP - 12 PIN, ~0.5ul SLOT, 96 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 451S1 |
FIXED REPLICATOR STRIP - 12 PIN, ~1ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 451S1A |
FIXED REPLICATOR STRIP - 12 PIN, ~1ul SLOT, 96 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 451S2 |
FIXED REPLICATOR STRIP - 12 PIN, ~2ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 451S2A |
FIXED REPLICATOR STRIP - 12 PIN, ~2ul SLOT, 96 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 451S5 |
FIXED REPLICATOR STRIP - 12 PIN, ~5ul SLOT, 96 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 451S5A |
FIXED REPLICATOR STRIP - 12 PIN, ~5ul SLOT, 96 WELL FORMAT, 45mm PIN
LENGTH, 1.58 mm PIN DIAMETER |
|
VP
452 |
FIXED REPLICATOR STRIP - 16 PIN, ~0.25ul HANGING DROP, 384 WELL FORMAT,
22mm PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 452A |
FIXED REPLICATOR STRIP - 16 PIN, ~0.25ul HANGING DROP, 384 WELL FORMAT,
57mm PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 452F |
FLOATING REPLICATOR STRIP - 16 PIN, ~0.25ul HANGING DROP, 96 WELL
FORMAT, 22mm PIN LENGTH, 1.58m PIN DIAMETER |
|
VP 452FP1 |
FLOATING REPLICATOR STRIP - 16 PIN, ~20nl HANGING DROP, 384 WELL FORMAT,
17mm PIN LENGTH, 0.457mm PIN DIAMETER |
|
VP 452FP3 |
FLOATING REPLICATOR STRIP - 16 PIN, ~90nl HANGING DROP, 96 WELL FORMAT,
17mm PIN LENGTH, 0.78mm PIN DIAMETER |
|
VP 452FS.5 |
FLOATING REPLICATOR STRIP - 16 PIN, ~0.5ul SLOT, 384 WELL FORMAT, 22mm
PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 452FS1 |
FLOATING REPLICATOR STRIP - 16 PIN, ~1ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 452FS2 |
FLOATING REPLICATOR STRIP - 16 PIN, ~2ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 452FS5 |
FLOATING REPLICATOR STRIP - 16 PIN, ~5ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 452MP |
MOUNTING PLATE TO CONNECT FLOATING VP 450 & VP 452 REPLICATOR STRIPS, VP
478R & VP 478AR TO ROBOT MOUNTING PLATES IN THE "Y" AXIS |
|
VP 452P1 |
FIXED REPLICATOR STRIP - 16 PIN, ~20nl HANGING DROP, 384 WELL FORMAT,
14mm PIN LENGTH, 0.457mm PIN DIAMETER |
|
VP 452P3 |
FIXED REPLICATOR STRIP - 16 PIN, ~90nl HANGING DROP, 384 WELL FORMAT,
14mm PIN LENGTH, 0.78mm PIN DIAMETER |
|
VP 452S.5 |
FIXED REPLICATOR STRIP - 16 PIN, ~0.5ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 452S.5A |
FIXED REPLICATOR STRIP - 16 PIN, ~0.5ul SLOT, 384 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 452S1 |
FIXED REPLICATOR STRIP - 16 PIN, ~1ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 452S1A |
FIXED REPLICATOR STRIP - 16 PIN, ~1ul SLOT, 384 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 452S2 |
FIXED REPLICATOR STRIP - 16 PIN, ~2ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 452S2A |
FIXED REPLICATOR STRIP - 16 PIN, ~2ul SLOT, 384 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 452S5 |
FIXED REPLICATOR STRIP - 16 PIN, ~5ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 452S5A |
FIXED REPLICATOR STRIP - 16 PIN, ~5ul SLOT, 384 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 453 |
FIXED REPLICATOR STRIP - 24 PIN, ~0.25ul HANGING DROP, 384 WELL FORMAT,
22mm PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 453A |
FIXED REPLICATOR STRIP - 24 PIN, ~0.25ul HANGING DROP, 384 WELL FORMAT,
57mm PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 453F |
FLOATING REPLICATOR STRIP - 24 PIN, ~0.25ul HANGING DROP, 384 WELL
FORMAT, 22mm PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 453FP1 |
FLOATING REPLICATOR STRIP - 24 PIN, ~20nl HANGING DROP, 384 WELL FORMAT,
17mm PIN LENGTH, 0.457mm PIN DIAMETER |
|
VP 453FP3 |
FLOATING REPLICATOR STRIP - 24 PIN, ~90nl HANGING DROP, 384 WELL FORMAT,
17mm PIN LENGTH, 0.78mm PIN DIAMETER |
|
VP 453FS.5 |
FLOATING REPLICATOR STRIP - 24 PIN, ~0.5ul SLOT, 96 WELL FORMAT, 22mm
PIN LENGTH, 1.58mm PIN DIAMETER |
|
VP 453FS1 |
FLOATING REPLICATOR STRIP - 24 PIN, ~1ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 453FS2 |
FLOATING REPLICATOR STRIP - 24 PIN, ~2ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 453FS5 |
FLOATING REPLICATOR STRIP - 24 PIN, ~5ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 453MP |
MOUNTING PLATE TO CONNECT FLOATING VP 451 & VP 453 REPLICATOR STRIPS, VP
478R & VP 478AR TO ROBOT MOUNTING PLATES IN THE "X" AXIS |
|
VP 453P1 |
FIXED REPLICATOR STRIP - 24 PIN, ~20nl HANGING DROP, 384 WELL FORMAT,
14mm PIN LENGTH, 0.457mm PIN DIAMETER |
|
VP 453P3 |
FIXED REPLICATOR STRIP - 24 PIN, ~90nl HANGING DROP, 96 WELL FORMAT,
14mm PIN LENGTH, 0.78mm PIN DIAMETER |
|
VP 453S.5 |
FIXED REPLICATOR STRIP - 24 PIN, ~0.5ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 453S.5A |
FIXED REPLICATOR STRIP - 24 PIN, ~0.5ul SLOT, 384 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 453S1 |
FIXED REPLICATOR STRIP - 24 PIN, ~1ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 453S1A |
FIXED REPLICATOR STRIP - 24 PIN, ~1ul SLOT, 384 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 453S2 |
FIXED REPLICATOR STRIP - 24 PIN, ~2ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 453S2A |
FIXED REPLICATOR STRIP - 24 PIN, ~2ul SLOT, 384 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 453S5 |
FIXED REPLICATOR STRIP - 24 PIN, ~5ul SLOT, 384 WELL FORMAT, 22mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 453S5A |
FIXED REPLICATOR STRIP - 24 PIN, ~5ul SLOT, 384 WELL FORMAT, 45mm PIN
LENGTH, 1.58mm PIN DIAMETER |
|
VP 455FP1 |
FLOATING REPLICATOR STRIP - 48 PIN, ~20nl HANGING DROP, 1,536 WELL
FORMAT, 17mm PIN LENGTH, 0.457mm PIN DIAMETER, WITH 1.19 MM DIAMETER
GUIDE PINS |
|
VP 455FP3 |
FLOATING REPLICATOR STRIP - 48 PIN, ~80nl HANGING DROP, 1,536 WELL
FORMAT, 17mm PIN LENGTH, 0.787mm PIN DIAMETER, WITH 1.19 MM DIAMETER
GUIDE PINS |
|
VP 460 |
96 FIXED TIP PIPETTOR FOR CYBI WELL |
|
VP 470 |
GLASS SLIDE INDEXING SYSTEM FOR MICROARRAYS, USES 1" x 3" OR 25mm x
75mm GLASS SLIDES, COMPATIBLE WITH STANDARD FP1S6 PINS |
|
VP 470T |
GLASS SLIDE INDEXING SYSTEM FOR MICROARRAYS, USES 1" x 3" OR 25mm x 75mm
GLASS SLIDES, WITH 11mm TALL BLOCKS TO ADAPT TO 11mm LONGER FP1S6T PINS
IN VP 478 REPLICATOR AND LONGER ALIGNMENT PINS |
|
VP 471 |
COOLING BLOCK KIT, INSULATION FRAME |
|
VP 471A |
EXTRA ALUMINUM COOLING BLOCK |
|
VP 472 |
96 WELL MICROPLATE INDEXING SYSTEM FOR VP 478 GLASS SLIDE REPLICATOR |
|
VP 472A |
384 WELL MICROPLATE INDEXING SYSTEM FOR VP 478A GLASS SLIDE REPLICATOR |
|
VP 472ACD |
384 WELL MICROPLATE INDEXING SYSTEM FOR VP 478ACD (24 PIN REPLICATOR) |
|
VP 472B |
96 WELL TALL PCR PLATE INDEXING SYSTEM FOR VP 478T GLASS SLIDE
REPLICATOR |
|
VP 472CD |
96 WELL MICROPLATE INDEXING SYSTEM FOR 478CD (6 PIN REPLICATOR) |
|
VP 473 |
PLEXIGLASS HUMIDITY HOOD FOR GLASS SLIDE ARRAYING |
|
VP 474 |
REPLICATOR PIN DRYER, OPERATES USING 110 VOLTS AC |
|
VP 475 |
GLASS SLIDE ARRAYER WASH AND BLOT STATION |
|
VP 476 |
SUNBEAM MODEL 697 COLD HUMIDIFIER, OPERATES USING 110 VOLTS AC |
|
VP 476A |
HYGROMETER AND TEMPERATURE GAUGE |
|
VP 478 |
GLASS SLIDE ARRAYER REPLICATOR, HOLDS 2 ROWS OF 4 PINS (8 TOTAL)
REPLICATOR PINS, EACH PIN HOLDS ~6nl, MATES WITH VP 470 |
|
VP 478A |
GLASS SLIDE ARRAYER REPLICATOR, HOLDS UP TO 32 REPLICATOR PINS ON 4.5mm
CENTERS, EACH PIN HOLDS ~6nl |
|
VP 478ACD |
CD REPLICATOR FOR MANUAL INDEXING SYSTEM, 24 PINS FOR 384 WELL PLATES |
|
VP 478AR |
GLASS SLIDE ARRAYER REPLICATOR FOR ROBOT, HOLDS UP TO 32 REPLICATOR
PINS, EACH PIN HOLDS ~6nl |
|
VP 478CD |
CD REPLICATOR FOR MANUAL INDEXING SYSTEM, 6 PINS FOR 96 WELL PLATES |
|
VP 478R |
GLASS SLIDE ARRAYER REPLICATOR FOR ROBOT, HOLDS UP TO 8 REPLICATOR PINS,
EACH PIN HOLDS ~6nl |
|
VP 478T |
GLASS SLIDE ARRAYER REPLICATOR, HOLDS 2 ROWS OF 4 TALL PINS (FP1S6T
PINS, EXPOSED PIN LENGTH = 28mm,) EACH PIN HOLDS ~6nl, MATES WITH VP 470 |
|
VP 480 |
MULTI-BLOT REPLICATOR - 48 PINS ON 12mm CENTERS - DELIVERS ~2ul |
|
VP 481M |
MULTI-BLOT REPLICATOR - 48 PINS ON 13mm CENTERS, FOR STIRRER EXTRACTION,
1.58MM DIAMETER PINS - DELIVERS ~1ul |
|
VP 481-P12 |
MULTI-BLOT REPLICATOR - 48 PINS ON 13mm CENTERS, 2.36 MM DIAMETER PINS -
DELIVERS ~3ul |
|
VP 481-P13 |
MULTI-BLOT REPLICATOR - 48 PINS ON 13mm CENTERS, 3.18mm DIAMETER PINS,
21.8 mm EXPOSED, GUIDE PINS 1.58 MM DIAMETER, 21 MM EXPOSED - DELIVERS
~3ul |
|
VP 490 |
COMPACT DISC ARRAYER, WITH 8 RADIAL SPOTTING POSITIONS ON THE CD AND 8 X
8 = 64 SPOTTING POSITIONS 1.125mm PITCH = 384 SPOTS/ARRAY |
|
VP 502 |
HYBOND N NYLON MEMBRANES - 10cm x 15cm - 20/PKG |
|
VP 503 |
HYBOND N NYLON MEMBRANES - 30cm x 3m ROLL |
|
VP 504B |
PALL BIODYNE®
B NYLON MEMBRANE - CUT TO FIT OMNI TRAY - 20/PKG |
|
VP 504V |
NYTRAN MS NYLON MEMBRANE - CUT TO FIT VP 386VF - 22cm x 32cm - 10/PKG |
|
VP 521V |
GB0002 WICKING PAPER - CUT TO FIT VP 386VF - 22cm x 32cm - 10/PKG |
|
VP 522 |
LINT FREE BLOTTING PAPER - 80mm x 115mm, 10/PKG |
|
VP 522-100 |
LINT FREE BLOTTING PAPER, 80mm x 115mm, 100/PKG |
|
VP 522A |
LINT FREE BLOTTING PAPER - CUT TO FIT VP 475 WASH AND BLOT STATION (5cm
x 31cm) - 10/PKG |
|
VP 522A-100 |
LINT FREE BLOTTING PAPER CUT TO FIT VP 475 WASH AND BLOT STATION (5cm x
31cm) - 100/PKG |
|
VP 530 |
REAGENT RESERVOIR WITH 96 DIMPLED DEPRESSIONS, MADE WITH POLYPROPYLENE |
|
VP 530A |
REAGENT RESERVOIR WITH 96 DIMPLED DEPRESSIONS AND 8 CONTROL
MINI-CHAMBERS WITH 1 DEPRESSION EACH, CHAMBER DEPTH = 2.54cm |
|
VP 530-AL |
REAGENT RESERVOIR WITH 96 - 8mm DIAMETER DIMPLED DEPRESSIONS, MADE WITH
HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH = 40mm, 127.76mm LONG,
85.48mm WIDE, 48mm TALL, THICK WALLS, ROUNDED INSIDE CORNERS TO DIMPLES |
|
VP 530B |
REAGENT RESERVOIR WITH 96 DIMPLED DEPRESSIONS AND 1 CONTROL CHAMBER WITH
8 DEPRESSIONS, CHAMBER DEPTH = 2.54cm |
|
VP 530C |
MAXIMUM REAGENT RESERVOIR WITH 96 DIMPLED DEPRESSIONS AND UNDER CUT TO
SBS FOOT PRINT, HOLDS 700 ML, CHAMBER DEPTH = 3.7cm |
|
VP 530C-B |
Maximum Reagent Reservoir With 96 Dimpled Depression And Under Cut To
SBS Foot Print, Hold 700ml, Chamber Depth = 3.7cm - made from Black
Delrin |
|
VP 530C-BL |
Black Delrin lid for VP 530C. 96 holes are 7.00 mm in diameter are
drilled through the lid. |
|
VP 530D |
REAGENT RESERVOIR WITH 96 DIMPLED DEPRESSIONS WITH THICK WALLS AND
MINIMUM DEAD VOLUME, CHAMBER DEPTH = 2.54cm |
|
VP 530-D-AL |
REAGENT RESERVOIR WITH 96 - 3.3mm DIAMETER DIMPLED DEPRESSIONS, MADE
WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH = 24mm, 127.76mm LONG,
85.48mm WIDE, 32mm TALL, THICK WALLS |
|
VP 530-F-AL |
REAGENT RESERVOIR, MADE WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR
DEPTH = 40mm, 127.76mm LONG, 85.48mm WIDE, 51mm TALL, THICK WALLS |
|
VP 530D-4AL |
|
|
VP 530E |
REAGENT RESERVOIR WITH 96 DIMPLED DEPRESSIONS AND 6 CONTROL
MINI-CHAMBERS, CHAMBER DEPTH = 23.1mm, 32 MM TALL, INTERNAL WALLS = 1.5
mm THICK, MADE FROM POLYPROPYLENE |
|
VP 530-FP-AL |
Reservoir, Aluminum, Peltier Grooves on Bottom, Recessed Sides to
Accommodate Microplate Lid |
|
VP 531 |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS, MADE WITH POLYPROPYLENE,
RESERVOIR DEPTH = 2.54cm |
|
VP 531A |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS AND 8 EDGE CONTROL
MINI-CHAMBERS WITH 4 DEPRESSION EACH, CHAMBER DEPTH = 2.54cm MADE FROM
POLYPROPYLENE |
|
VP 531-AL |
REAGENT RESERVOIR WITH 384 - 3.3mm DIAMETER DIMPLED DEPRESSIONS, MADE
WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH = 25.4mm, 127.76mm
LONG, 85.48mm WIDE, 32mm TALL, THICK WALLS, ROUNDED INSIDE CORNERS TO
DIMPLES |
|
VP 531-ALL |
LOW PROFILE REAGENT RESERVOIR WITH 384 - 3.3mm DIAMETER DIMPLED
DEPRESSIONS, MADE WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH =
11.5mm, 127.76mm LONG, 85.48mm WIDE, 15mm TALL, THICK WALLS, ROUNDED
INSIDE CORNERS TO DIMPLES |
|
VP 531-ALL-1 |
Low profile 384 10 ul dimpled depressions reagent reservoir made with
hydrophilic coated aluminum. The reagent reservoir conforms to SBS
standard dimensions of 127.7 mm long 85.5 mm wide and with a 11.5 mm
deep cavity and stands 15 mm tall. |
|
VP 531B |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS AND 12 CONTROL CENTER
MINI-CHAMBERS WITH 4 DEPRESSION EACH, CHAMBER DEPTH = 2.54cm MADE FROM
POLYPROPYLENE |
|
VP 531C |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS AND 16 CONTROL
MINI-CHAMBERS WITH 4 DEPRESSION AT BOTH EDGES, EACH, CHAMBER DEPTH =
2.54cm MADE FROM POLYPROPYLENE |
|
VP 531C-ALL-OPEN |
REAGENT RESERVOIR WITH 16 CONTROL MINI-CHAMBERS TO ACCOMMODATE 4 384
WELL PIPET TIPS, EACH, MADE FROM HYDROPHILIC COATED ALUMINUM |
|
VP 531D |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS AND 16 CONTROL
MINI-CHAMBERS WITH 4 DEPRESSION ON ONE EDGE, EACH, CHAMBER DEPTH =
2.54cm MADE FROM POLYPROPYLENE |
|
VP 531E-PTFE |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS DIVIDED INTO 4 QUADRANTS
AND 4 CONTROL MINI-CHAMBERS (G11, G12, H11, H12 AND I11, I12, J11, J12
IN THE CENTER AND G 23, G24, H23, H24 AND I23, I24, J23 J24 ON THE RIGHT
SIDE) WITH 4 DEPRESSIONS IN EACH CONTROL. CONTROL WELLS TO BE SAME
VOLUME (CENTER AND EDGE) DEPTH = 2.54cm MADE FROM PTFE |
|
VP 531F-PTFE |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS WITH 4 CONTROL
MINI-CHAMBERS (G11, G12, H11, H12 AND I11, I12, J11, J12 IN THE CENTER
AND G 23, G24, H23, H24 AND I23, I24, J23 J24 ON THE RIGHT SIDE) WITH 4
DEPRESSIONS IN EACH CONTROL. CONTROL WELLS TO BE SAME VOLUME (CENTER AND
EDGE) DEPTH = 2.54cm MADE FROM PTFE |
|
VP 531G |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS DIVIDED INTO 4 QUADRANTS
A-H 1-12, A-H DEPTH = 2.54cm MADE FROM POLYPROPYLENE |
|
VP 531G-AL |
DIMPLED DEPRESSIONS DIVIDED INTO 4 QUADRANTS A-H 1-12, A-H DEPTH = 19
mm, WALL THICKNESS = 0.70 mm, MADE FROM HYDROPHILIC COATED ALUMINUM |
|
VP 531G-PTFE |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS DIVIDED INTO 4 QUADRANTS
A-H 1-12, A-H DEPTH = 2.54cm MADE FROM PTFE |
|
VP 531J |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS AND 1 CONTROL CHAMBER
WITH
2 COLUMNS OF 16 DEPRESSIONS EACH, CHAMBER DEPTH = 2.54cm |
|
VP 531J1 |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS AND 1 CONTROL CHAMBER
WITH
1 COLUMN OF 16 DEPRESSIONS, CHAMBER DEPTH = 2.54 |
|
VP 531J1-AL |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS AND 1 CONTROL CHAMBER
WITH
2 COLUMNS OF 16 DEPRESSIONS EACH, CHAMBER DEPTH = 2.54cm |
|
VP 531K |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS AND 4 LARGE 40 ML SECTION
RESERVOIRS AND 16 CONTROL WELLS. THE 4 LARGE SECTIONS ARE (1) A-H
3-14, (2) I-P 3-14, (3) A-H 15-24, (4) I-P 15-24. THE 16 CONTROL
SEGMENTS OCCUPY COLUMNS 1-2 and 15-16. ALL THE MINI CONTROL WELLS TO
HOLD 1.4 ML, EACH, CHAMBER DEPTH = 2.54cm MADE FROM POLYPROPYLENE |
|
VP 531L |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS AND DEPTH OF 2.54 TO
BOTTOM OF DEPRESSIONS, HOLDS 450 ML, MADE FROM POLYPROPYLENE, EACH |
|
VP 531M |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS AND 2 MINI CONTROL
COLUMNS IN 1 AND 13 AND 2 LARGE SEGMENT CHAMBERS IN COLUMNS 2 TO 12 AND
14 TO 24, CHAMBER DEPTH = 2.54cm MADE FROM POLYPROPYLENE |
|
VP 531M-AL |
SECTIONS IN COLUMNS 2-12 AND 14-24 AND 2 SMALL SECTIONS IN COLUMN 1 AND
13, CHAMBER DEPTH - 19mm, WALL THICKNESS = 0.70mm, MADE FROM
HYDROPHILIC COATED ALUMINUM |
|
VP 531N |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS AND 5 MINI CONTROL
COLUMNS AND ONE LARGE SEGMENT CHAMBER IN COLUMNS 3 TO 22, CHAMBER DEPTH
= 2.54cm MADE FROM POLYPROPYLENE |
|
VP 531N-1 |
REAGENT RESERVOIR WITH 384 DIMPLED DEPRESSIONS AND1 MINI CONTROL
COLUMNS, CHAMBER DEPTH = 2.54cm MADE FROM POLYPROPYLENE |
|
VP 531N-2 |
REAGENT RESERVOIR 384 WELL MICROPLATES WITH 11 MINI CONTROL COLUMNS AND ONE
LARGE SEGMENT CHAMBER IN COLUMNS 3 TO 22, CHAMBER DEPTH = 2.54cm MADE FROM
POLYPROPYLENE |
|
VP 531O-ALL |
LOW PROFILE REAGENT RESERVOIR WITH 384 - 3.3mm DIAMETER DIMPLED
DEPRESSIONS. WITH TWO CONTROL CHAMBERS ON LEFT SIDE, ONE DIMPLE WIDE
EACH. RESERVOIR DEPTH = 12mm, 127.76mm LONG, 85.48mm WIDE, ~15mm TALL.
MADE FROM HYDROPHILIC-COATED ALUMINUM. |
|
VP 531P-PEEK |
REAGENT RESERVOIR WITH 24 COLUMNS AND A U BOTTOM. CHAMBER/COLUMN DEPTH -
19mm, WALL THICKNESS = 0.75mm, 127.7mm LONG, 85.5mm WIDE. STANDS 32mm
TALL. MADE FROM PEEK |
|
VP 531Q-1AL |
HYDROPHILIC COATED ALUMINUM RESERVOIR 127.7mm LONG 85.5mm WIDE WITH 19mm
DEEP CAVITY AND STANDS 32mm TALL OVERALL. CONTAINS EIGHT SMALL CHAMBERS
AND ONE LARGE CENTRAL CHAMBER |
|
VP 531Q-2AL |
HYDROPHILIC COATED ALUMINUM RESERVOIR 127.7mm LONG 85.5mm WIDE WITH 19mm
DEEP CAVITY AND STANDS 32mm TALL OVERALL. CONTAINS 4 SMALL CHAMBERS AT
THE EDGES AND ONE LARGE CENTRAL CHAMBER. |
|
VP 531Q-3AL |
HYDROPHILIC COATED ALUMINUM RESERVOIR 127.7mm LONG 85.5mm WIDE WITH 19mm
DEEP CAVITY AND STANDS 32mm TALL OVERALL. CONTAINS 4 SMALL CHAMBERS AND
2 LARGE CHAMBERS. |
|
VP 531Q-4AL |
HYDROPHILIC COATED ALUMINUM RESERVOIR 127.7mm LONG 85.5mm WIDE WITH 19mm
DEEP CAVITY AND STANDS 32mm TALL OVERALL. CONTAINS 8 SMALL CHAMBERS AND
2 LARGE CHAMBERS. |
|
VP 531Q-5AL |
HYDROPHILIC COATED ALUMINUM RESERVOIR 127.7mm LONG 85.5mm WIDE WITH 19mm
DEEP CAVITY AND STANDS 32mm TALL OVERALL. CONTAINS 2 LARGE CHAMBERS. |
|
VP 531Q-5AL |
Hydrophilic Coated Aluminum Reservoir 127.7mm Long 85.5mm Wide With 19mm
Deep Cavity And Stands 32mm Tall Overall. Contains 2 Large Chambers.
Price/Each |
|
VP 531Q-6AL |
Hydrophilic Coated Aluminum Reservoir 127.7mm Long 85.5mm Wide With 19mm
Deep Cavity And Stands 32mm Tall Overall. Contains 4 Chambers (Columns
1-6, 7-12, 13-18, 19-24) with 384 dimpled bottom pattern. Price/Each |
|
VP 531R-1AL |
HYDROPHILIC COATED ALUMINUM RESERVOIR 127.7mm LONG 85.5mm WIDE WITH 19mm
DEEP CAVITY AND STANDS 32mm TALL OVERALL, 3.2mm DIMPLED PATTERN IN
BOTTOM ON 4.5mm CENTERS, CONTROL COMPARTMENT IN I23 TO P24 WITH 0.7mm
THICK DIVIDING WALL. ALSO 2 LOCATING HOLES IN BOTTOM FOR VP 744
HEATER/CHILLER |
|
VP 531R-2AL |
HYDROPHILIC ALUMINUM RESERVOIR 127.7mm LONG 85.5mm WIDE WITH 19mm DEEP
CAVITY AND STANDS 32mm TALL OVERALL, 3.2mm DIMPLED PATTERN IN BOTTOM ON
4.5mm CENTERS, CONTROL COMPARTMENTS IN I23 TO L24 AND M23 TO P24 WITH
0.7mm THICK DIVIDING WALLS WITH 2 LOCATING HOLES IN BOTTOM FOR ATTACHING
TO VP 744 HEATER/CHILLER. |
|
VP 531S-AL |
REAGENT RESERVOIR WITH 1 LARGE CENTRAL 20 WELL WIDE SECTION IN COLUMNS
3-22, AND ROWS A-P AND 8 CONTROL SECTIONS ON EACH SIDE IN COLUMNS 1-2,
AND 23-24 ROWS AB, CD, EF, GH, IJ, KL, MN, OP. CHAMBER DEPTH - 23.4 mm,
DIVIDING WALL THICKNESS = 0.70 MM, BOTTOM FOOTPRINT = 85.48 MM BY 127.76
MM, TOP FOOTPRINT = 85.48 MM BY 160.70 MM. MADE FROM HYDROPHILIC COATED
ALUMINUM |
|
VP 531T-AL |
Hydrophilic Coated Aluminum Reagent Reservoir With 384 Dimpled
Depressions And 6 Control Chambers. Chamber Depth = 2.54 Cm. Dividing
Walls = 0.7 Mm Thick. Price Each. |
|
VP 531U-AL |
Hydrophilic Coated Aluminum Reagent Reservoir 10 mm Deep With A Flat
Bottom With 5 Chambers Each Separated By A 6 mm Wide Wall. Overall
Height Of The Reservoir Is 15 mm By 127.76 mm Long And 85.48 mm Wide.
Price Each. |
|
VP 531-X1 |
384 style Polypropylene reservoir with 5 chambers 3 columns wide and a 6
th smaller 1 column wide |
|
VP 532-AL |
REAGENT RESERVOIR WITH 1536 - 1.5mm DIAMETER DIMPLED DEPRESSIONS, MADE
WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH = 5mm, 127.76mm LONG,
85.48mm WIDE, 10mm TALL, THICK WALLS, ROUNDED INSIDE CORNERS TO DIMPLES |
|
VP 532-ALA |
REAGENT RESERVOIR WITH 1536 - 1.5mm DIAMETER DIMPLED DEPRESSIONS, MADE
WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH = 5mm, 127.76mm LONG,
85.48mm WIDE, 10mm TALL, THICK WALLS, ROUNDED INSIDE CORNERS TO DIMPLES,
8 CONTROL WELLS AT EACH EDGE |
|
VP 532-ALB |
VP 532-ALB REAGENT RESERVOIR WITH 1536 - 1.5mm DIAMETER DIMPLED
DEPRESSIONS, MADE WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH =
10mm, 127.76mm LONG, 85.48mm WIDE, 15mm TALL, THICK WALLS, ROUNDED
INSIDE CORNERS TO DIMPLES, 4 CONTROL WELL IN COLUMNS 1 AND 2 THROUGH ROW
1 TO 36 AND 4 CONTROL WELLS IN COLUMNS 47 AND 48 THROUGH ROW 1 TO 36. |
|
VP 533-AL |
DEERAC FLUIDICS REAGENT RESERVOIR, MADE WITH HYDROPHILIC COATED
ALUMINUM, EACH |
|
VP 540 |
SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES, 2.54cm
DEEP, EACH |
|
VP 540-1 |
SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 11 BAFFLES, 127.76mm
LONG, 85.48mm WIDE, 32mm TALL, 23mm DEEP, X WALL THICKNESS 7.1 MM, Y
WALL THICKNESS 10.3mm, GUIDE PINS PROTRUDE 1.5mm, EACH |
|
VP 540A |
BLOTTING MEDIA SUPPORT FOR VP 540 WITH 96 HOLES |
|
VP 540A2 |
SUPPORT STRUCTURE FOR VP 540AC ON STIR STIX REMOVER |
|
VP 540AC |
96 HOLE LINT FREE BLOTTING MEDIA, 10/PKG, FITS ON VP 540A SUPPORT |
|
VP 540B1 |
384 Hole Blotting Media Support With Alignment Holes For 384 Fountain
Reservoir (VP 546) Constructed From 0.031" Thick G10 |
|
VP
540B2 |
384 Hole Blotting Media Support With Alignment Holes For VP 549 Wash
Reservoir Series And Guides For Blotting Media, Constructed From G10 |
|
VP 540BC |
384 HOLE LINT FREE BLOTTING MEDIA, 10/PKG, FITS ON VP 540B1 SUPPORT |
|
VP 540C-12 |
LINT FREE BLOTTING PAPER WITH 12 FLAPS AND TABS, 105 mm X 140 mm X 0.4mm |
|
VP 540C-24 |
LINT FREE BLOTTING PAPER WITH 24 FLAPS AND TABS, 105 mm X 140 mm X 0.4mm |
|
VP 540D |
LINT FREE BLOTTING MEDIA, CUT TO FIT INTO AN OMNI TRAY, 10/PKG |
|
VP 540D-100 |
LINT FREE BLOTTING MEDIA, CUT TO FIT INTO AN OMNI TRAY, 100/PKG |
|
VP 540DB |
HEAVY DUTY BLOTTING SYSTEM, SUPER ABSORBENT PAD WITH LINT-FREE BLOTTING
MEDIA IN AN OMNI TRAY, 10/PKG |
|
VP 540DB.4 |
HEAVY DUTY BLOTTING SYSTEM, SUPER ABSORBENT PAD WITH LINT-FREE BLOTTING
MEDIA IN AN OMNI TRAY, 4/PKG |
|
VP 540DB.6 |
HEAVY DUTY BLOTTING SYSTEM, SUPER ABSORBENT PAD WITH LINT-FREE BLOTTING
MEDIA IN AN OMNI TRAY, 6/PKG |
|
VP 540DB-100 |
HEAVY DUTY BLOTTING SYSTEM, SUPER ABSORBENT PAD WITH LINT-FREE BLOTTING
MEDIA IN AN OMNI TRAY, 10 PACKAGES OF 10 |
|
VP 540DB1 |
SUPER ABSORBENT POLYPROPYLENE PAD CUT TO FIT IN AN OMNI TRAY, PACKAGE OF
10 |
|
VP 540DB1-100 |
SUPER ABSORBENT POLYPROPYLENE PAD CUT TO FIT IN AN OMNI TRAY, PACKAGE OF
100 |
|
VP 540F |
G10 BAFFLES FOR VP 540 RESERVOIRS, SET OF 13 |
|
VP 540F-1 |
G10 BAFFLES FOR VP 540-1 RESERVOIRS, 73.6mm WIDE, 22.7mm TALL, SET OF
11, |
|
VP 540L-1536 |
SINGLE NI-LUBE COATED ALUMINUM WASH RESERVOIR WITH SLOTS FOR 3 VP
540LF-1536 BAFFLES |
|
VP 540LF-1536 |
NI-LUBE COATED ALUMINUM BAFFLES FOR VP 540L-1536 RESERVOIR, SET OF 3 |
|
VP 540L |
SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 7 VP 540LF BAFFLES |
|
VP 540LF |
G10 BAFFLES FOR VP 540L RESERVOIRS, 25mm TALL, SET OF 7 |
|
VP 540L-PTFE |
SINGLE PTFE WASH RESERVOIR WITH SLOTS FOR 7 VP 540LF-PTFE BAFFLES |
|
VP 540LF-PTFE |
ANODIZED ALUMINUM - PTFE COATED BAFFLES FOR VP 540L-PTFE RESERVOIRS,
25mm TALL, SET OF 7 |
|
VP 540M |
ADAPTOR FOR MULTIMEK PIPETTE TIP LOADER/PIPETTE WASH STATION, ALIGNS TO
TWO PINS ON DECK AND HOLDS VP 540, VP 542 OR MICROPLATE |
|
VP 540PCB |
SINGLE PTFE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES, 2.54cm DEEP, EACH |
|
VP 540S |
POLYPROPYLENE RESERVOIR HOLDING VP 426 SCRUB PAD FOR PIN CLEANING. SBS
FEATURE ON THE BOTTOM FOR DECK PLACEMENT, EACH. |
|
VP 540T |
SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES AND A FILL
AND DRAIN NIPPLE, EACH |
|
VP 541 |
DUAL INTERDIGITATED WASH CHAMBER RESERVOIR SYSTEM |
|
VP 541T |
DUAL INTERDIGITATED WASH CHAMBER RESERVOIR SYSTEM WITH FILL AND DRAIN |
|
VP 542 |
LOW PROFILE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES,
1.5cm DEEP, EACH |
|
VP 542D |
VP 542 WITH 384 DIMPLED BOTTOM, AND SLOTS FOR13 BAFFLES, |
|
VP 542F |
G10 BAFFLES FOR VP 542 RESERVOIRS 12.5mm TALL, SET OF 13 |
|
VP 542M |
SINGLE POLYPROPYLENE REAGENT RESERVOIR WITH RECESSED NOTCHES FOR 13
BAFFLES |
|
VP 542MF |
G10 BAFFLES FOR VP 542M RESERVOIRS, 9.5 mm TALL, SET OF 13 |
|
VP 542ML |
BLACK DELRIN LID WITH LIP TO COVER VP 542M RESERVOIR |
|
VP 542T |
SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES, 1.5cm
DEEP, 4 LOCATING PINS FILL AND DRAIN NIPPLES |
|
VP 545 |
96 FOUNTAIN WASH RESERVOIR WITH PTFE FOUNTAINS AND PTFE COATED ALUMINUM
BASE, FOR CYBI WELL ROBOT WITH FOUNTAIN AND DRAIN NIPPLES |
|
VP 546 |
384 FOUNTAIN WASH RESERVOIR WITH PTFE FOUNTAINS AND PTFE COATED ALUMINUM
BASE, FOR CYBI WELL ROBOT WITH FOUNTAIN AND DRAIN NIPPLES |
|
VP 546A |
384 FOUNTAIN WASH RESERVOIR WITH FLAT FACED PTFE FOUNTAINS AND PTFE
COATED ALUMINUM BASE, FOR ALL ROBOT SYSTEMS, 127mm x 111mm x 26mm |
|
VP 546A1T |
384 FOUNTAIN WASH RESERVOIR WITH BEVEL FACED PTFE FOUNTAINS, 25 mm TALL
AND PTFE COATED ALUMINUM BASE, FOR ALL ROBOT SYSTEMS, 127mm x 111mm x
47mm |
|
VP 546B |
384 FOUNTAIN WASH RESERVOIR WITH PTFE FOUNTAINS AND PTFE COATED ALUMINUM
BASE, FOR CYBI WELL ROBOT WITH FOUNTAIN AND DRAIN NIPPLES, LUER FITTINGS
AND THICKER BASE THAN VP 546 |
|
VP 547 |
96 DUAL PTFE IMPREGNATED ALUMINUM FOUNTAIN WASH RESERVOIR FOR CYBI WELL
ROBOT WITH 2 DIFFERENT FOUNTAIN NIPPLES AND A COMMON DRAIN NIPPLE |
|
VP 549ETOH |
ALCOHOL WASH RESERVOIR WITH RUNNING FLUIDS OVER A SPILLWAY AND TAKEN TO
WASTE BOTTLE. RESERVOIR CONSTRUCTED FROM POLYPROPYLENE |
|
VP
549ETOH-2 |
Alcohol Wash Reservoir With Running Fluids Over Spillway, Polypropylene.
Inlet & Outlet Luer Ports On Same Side Of Reservoir. Pins At 2 Corners
To Hold Blotting Support. |
|
VP
549ETOH-3 |
Alcohol Wash Reservoir With Running Fluids Over Spillway, Polypropylene.
Inlet & Outlet Luer Ports On Opposite Short Sides. Pins At 2 Corners To
Hold Blotting Support. |
|
VP
549ETOH-RF-1 |
Rapid Flush Alcohol Wash Reservoir With Running Fluids Over A Spillway.
Large Inlet And Outlet Ports From Chamber Plus Small Outlet From
Spillway. Two Guidepins For Alignment Of Blotting Media Support.
Constructed From Polypropylene. |
|
VP 549H2O |
WATER WASH RESERVOIR WITH RUNNING FLUIDS OVER A SPILLWAY AND TAKEN TO
WASTE BOTTLE. RESERVOIR CONSTRUCTED FROM POLYPROPYLENE |
|
VP
549H2O-2 |
Water Wash Reservoir With Running Fluids Over Spillway, Polypropylene.
Inlet & Outlet Luer Ports On Same Side Of Reservoir. Pins At 2 Corners
To Hold Blotting Support. |
|
VP
549H2O-3 |
Water Wash Reservoir With Running Fluids Over Spillway, Polypropylene.
Inlet & Outlet Luer Ports On Opposite Short Sides. Pins At 2 Corners To
Hold Blotting Support. |
|
VP 549H2O-RF |
RAPID FLUSH WATER WASH RESERVOIR WITH RUNNING FLUIDS OVER A SPILLWAY AND
TAKEN TO WASTE BOTTLE. RESERVOIR CONSTRUCTED FROM POLYPROPYLENE |
|
VP 549PE |
SPILLWAY RESERVOIR, PERKINELMER STYLE WITH QUICK DISCONNECT FITTINGS ON
BOTTOM |
|
VP 549PE-EP3 |
SPILLWAY RESERVOIR, PERKINELMER STYLE WITH QUICK DISCONNECT FITTINGS ON
SIDE |
|
VP 550 |
DOCKING STATION FOR PIN TOOLS, WITH 12 TO 17 MM LONG EXPOSED PINS |
|
VP 550A |
DOCKING STATION FOR ROBOT FLOATING PIN TOOLS - WILL ACCOMMODATE 12 TO
30mm EXPOSED LENGTH PINS |
|
VP 550A-HA |
Docking Station for the Hamamatsu and Agilent Pin Tools |
|
VP 550A-PE |
Docking Station for the PerkinElmer Style Pin Tools |
|
VP 550A-TeMO |
TECAN TeMO ROBOT ADAPTER PLATE WITH BALL DETENTS AND LOCATING PINS PLUS
VP 550A |
|
VP 550B |
Docking Station For Robot Floating Pin Tools - Will Accommodate up to
42mm Exposed Length Pins |
|
VP 551 |
Centrifuge Plate Holder, Oversized SBS Footprint With An SBS Pocket And
Reservoir At Bottom To Hold Up To 277ml. Made From 6061 Aluminum, Clear
Hard Anodize Coating. Designed For Qiagen Minelute Filter Plate.
Reservoir Fits Hermle Z300-Rotor 220.50 V06. |
|
VP 555 |
UNIVERSAL ROBOT PIN TOOL STORAGE/DOCKING STATION |
|
VP 560 |
PERISTALTIC PUMP KIT, INCLUDES PUMP, 3 PUMP HEADS AND MOUNTS COMPUTER
CONTROL SOFTWARE, RS 232 CABLE, 25' OF 6mm ID VITON TUBING, 25' 8mm ID
VITON TUBING |
|
VP
565 |
1 LITER LOW DENSITY POLYETHYLENE NALGENE BOTTLE WITH 0.91 METER TALL
RING STAND WITH SBS BASE, RING STAND CLAMP, TUBING, TUBING CLAMP AND
VELCRO STRAP |
|
VP
566A |
1 GAL./4L LOW DENSITY POLYETHYLENE CARBOY WITH TUBE ATTACHMENT ON
BOTTOM. COMES WITH TUBING, PINCH CLAMP AND VP 567D FLOW RESTRICTOR |
|
VP
567B |
0.127 MM DIAMETER FLOW RESTRICTOR |
|
VP
567C |
0.254 MM DIAMETER FLOW RESTRICTOR |
|
VP
567D |
0.508 MM DIAMETER FLOW RESTRICTOR |
|
VP 570L |
LOW PROFILE RESERVOIR, FLAT BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
|
VP 572 |
12 COLUMN RESERVOIR, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
|
VP 572C-24 |
24 COLUMN RESERVOIR, LOW PROFILE, PYRAMID BOTTOM, NATURAL POLYPROPYLENE,
25/CASE |
|
VP 572DC |
12 COLUMN RESERVOIR, PARTITIONED, V BOTTOM, NATURAL POLYPROPYLENE,
25/CASE |
|
VP 572DC-4 |
4 COLUMN RESERVOIR, PARTITIONED, V BOTTOM, NATURAL POLYPROPYLENE,
25/CASE |
|
VP 572DC-6 |
6 COLUMN RESERVOIR, PARTITIONED, V BOTTOM, NATURAL POLYPROPYLENE,
25/CASE |
|
VP 574D |
384 WELL RESERVOIR, PYRAMID BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
|
VP 574D-4 |
384 WELL RESERVOIR WITH FOUR CONTROLLED COLUMNS, RESERVOIR VOLUME 155ml,
CONTROL WELL COLUMN 2.60ml, 25/CASE |
|
VP 574L |
384 WELL RESERVOIR, LOW PROFILE, PYRAMID BOTTOM, NATURAL POLYPROPYLENE,
25/CASE |
|
VP 574L-5 |
384 WELL, 5 PARTITIONED RESERVOIR, LOW PROFILE, PYRAMID BOTTOM, WITH
WAVE BREAKERS. 25/CASE |
|
VP 576D |
96 WELL RESERVOIR, PYRAMID BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
|
VP 576L |
96 WELL RESERVOIR, LOW PROFILE, PYRAMID BOTTOM, NATURAL POLYPROPYLENE,
25/CASE |
|
VP 578D |
8 ROW RESERVOIR, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
|
VP 578DC |
8 ROW RESERVOIR, PARTITIONED, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
|
VP 578LC |
8 Column, Low Profile, Partitioned, V-Bottom, Natural Polypropylene
Reservoir |
|
VP 579 |
96 WELL, 4 mL/WELL , SQUARE WELL, PYRAMID BOTTOM, ASSEMBLY (1 FRAME 12
STRIPS OF 8 WELLS EACH) PACKAGE OF 20 |
|
VP 581 |
WARPED PCR PLATE FLATTENER |
|
VP 581-PE |
POLYCARBONATE ADAPTOR PLATE FOR ATTACHING VP 710C1-M OR VP 710C1-MCE TO
THE DECK OF A PERKIN ELMER EP3 OR JANUS WORK STATION. TWO LOCATING PINS
LOCATE INTO HOLES IN THE WORK STATION DECK. |
|
VP 581-PE-2 |
Polycarbonate Adaptor Plate for Attaching 8-Channel Magnetic Clutch,
Direct-Drive Bubble Paddle Reservoirs |
|
VP 581R |
RAISED POLYPROPYLENE SBS FEATURE FOR SPILLWAY RESERVOIRS |
|
VP 581A |
POLYPROPYLENE SBS BLOCK ADAPTOR 18 MM THICK WITH ACCESSORY MOUNTING
HOLES |
|
VP 581A-MICA |
MUSCOVITE VERY HIGH TEMPERATURE MICA SBS BLOCK ADAPTOR 19 MM THICK
WITH ACCESSORY MOUNTING HOLES - FOR HEAT BLOCK USAGE |
|
VP 581B |
POLYPROPYLENE SBS BLOCK ADAPTOR 12.5 MM THICK WITH ACCESSORY MOUNTING
HOLES |
|
VP 581B-1536 |
POLYPROPYLENE SBS BLOCK ADAPTOR 12.5 MM THICK MOUNTING PLATE FOR H+P
1536 TELESHAKE |
|
VP 581B-MICA |
MUSCOVITE VERY HIGH TEMPERATURE MICA SBS BLOCK ADAPTOR 13 MM THICK
WITH ACCESSORY MOUNTING HOLES - FOR HEAT BLOCK USAGE |
|
VP 581B-PTFE |
PTFE SBS BLOCK ADAPTOR 12.5 MM THICK WITH ACCESSORY MOUNTING HOLES |
|
VP 581C-AL |
MICROPLATE COOLER BLOCK, SBS FEATURE ON THE BOTTOM
AND AN SBS HOLDER ON THE TOP, OVER ALL HEIGHT = 2.54 CM MADE FROM
ALUMINUM AND BLACK ANODIZED |
|
VP 590 |
A custom Delrin Test Tube Rack that can hold two 50 ml Centrifuge Tubes,
six 15 ml Centrifuge Tubes and 12 Micro Centrifuge tubes. |
|
VP 601 |
LIQUID LEVEL DETECTION SYSTEM INCLUDING AMPLIFIER, AC-OUT CONTROL,
CURRENT LOOP CONTROL AND POWER SUPPLY |
|
VP 601A |
FIBER OPTIC LED LIQUID LEVEL SENSOR WITH TRANSMITTER AND RECEIVER |
|
VP 601B |
SBS PLATE MOUNTING SYSTEM FOR LIQUID LEVEL SENSOR |
|
VP 601C |
DB15 CONTROL CONNECTOR FOR BARNANT CORP. MODEL MASTERFLEX #7550-20
PERISTALTIC PUMP |
|
VP 601D |
POWER SUPPLY AND TUBING PINCH VALVE. |
|
VP 612 |
12 INCH HOOK & LOOP STRAP (HOLDS BUNDLE OF 5 PLATES) - 10/PKG |
|
VP 614 |
14 INCH NYLON CABLE TIES - 50/PKG |
|
VP 618 |
18 INCH HOOK & LOOP STRAP (HOLDS BUNDLE OF 8 PLATES) - 10/PKG |
|
VP 619 |
RUBBERBANDS (HOLDS BUNDLES OF 1 PLATE TO 10 PLATES) - 20/PKG |
|
VP 624 |
24 INCH NYLON CABLE TIES - 50/PKG |
|
VP 625 |
24 INCH HOOK & LOOP STRAP (HOLDS BUNDLE OF 12 PLATES) - 10/PKG |
|
VP 632 |
FOAMED SILICON RUBBER GASKETS - 10/PKG |
|
VP 640 |
LID SPACERS - 10/PKG |
|
VP 650 |
BUNDLE BOTTOMS - 5/PKG |
|
VP 651 |
BUNDLE TOPS - 5/PKG |
|
VP 670 |
CABLE TIE GUN |
|
VP 680 |
CABLE TIE CUTTER |
|
VP 690 |
SILICONE GREASE - 5.3 oz. TUBE |
|
VP 700 |
PROGRAMMABLE SMART SWITCH, WITH SOFTWARE TO SEPARATELY CONTROL ON OFF
FUNCTIONS OF 3 POWER OUTLETS, EACH OUTLET HAS A 5 AMP CIRCUIT BREAKER,
OPERATES OFF 115 VOLTS, 60 CYCLES |
|
VP 700-15 |
PROGRAMMABLE SMART SWITCH, WITH SOFTWARE TO SEPARATELY CONTROL ON OFF
FUNCTIONS OF 3 POWER OUTLETS, ONE OUTLET HAS A 15 AMP CIRCUIT BREAKER
AND THE OTHER TWO HAVE 2 AMP CIRCUIT BREAKERS, OPERATES OFF 115 VOLTS,
60 CYCLES |
|
VP 700CE |
PROGRAMMABLE SMART SWITCH, WITH SOFTWARE TO SEPARATELY CONTROL ON OFF
FUNCTIONS OF 3 POWER OUTLETS, EACH OUTLET HAS A 5 AMP CIRCUIT BREAKER,
OPERATES OFF 230 VOLTS, 50 CYCLES, CE COMPLIANT |
|
VP 700-15CE |
PROGRAMMABLE SMART SWITCH, WITH SOFTWARE TO SEPARATELY CONTROL ON OFF
FUNCTIONS OF 3 POWER OUTLETS, ONE OUTLET HAS A 15 AMP CIRCUIT BREAKER
AND THE OTHER TWO HAVE 2 AMP CIRCUIT BREAKERS, OPERATES OFF .230 VOLTS,
50 CYCLES, CE COMPLIANT |
|
VP 700-QS |
Quick Switch To Separately Control On/Off Functions Of 1 Power Outlet.
115Volts, 60Hz. Each. |
|
VP 701 |
MAGNETIC TUMBLE STIRRER - MANUAL - FOUR PLATE |
|
VP 706-1 |
Mega Stirrus 1 Horizontal Magnetic Stirrer With NdFeB Drive Magnet
Powered By A 3/8 Horse Power AC Inverter Duty Motor And Operates At
Speeds From 30 To 300 RPM. |
|
VP 706-2 |
Mega Stirrus 2 Horizontal Magnetic Stirrer With NdFeB Drive Magnet
Powered By A Brushless 90 Watt Motor (1/9 HP) And Operates At Speeds
From 100 To 450 RPM. |
|
VP 706B-1 |
MINI STIRRUS HORIZONTAL MAGNETIC STIRRER WITH A 22.86 CM BY 22.86 CM
FOOT PRINT, 115 VOLTS AC |
|
VP 706B-3 |
MINI STIRRUS HORIZONTAL/VORTEX MAGNETIC STIRRER WITH A 22.86 CM BY 22.86
CM FOOT PRINT, AND A VORTEX CAVITY FOR ONE MICROPLATE. 115 VOLTS AC |
|
VP 706B-4H |
HORIZONTAL MAGNETIC STIRRER/HEATER with Red Lion Temperature control
(22 C to
140C) and speed control from 100 to 2000 RPM, operates on 120 Volts AC |
|
VP 706B-5 |
VP 706B-5 Mini Stirrus Horizontal/Vortex Magnetic Stirrer With A 22.86cm
By 22.86cm Foot Print, And 15.24cm top plate with a 8.89cm ring
containing 12 holes to accommodate 12 cryotubes.
Magnet speed = 5000 RPM, 115 Volts AC |
|
VP 706-7 |
SEVEN POSITION STIRRER, 100 TO 2,500 RPM, 120 VOLTS
AC. |
|
VP 707 |
LEVITATION MAGNETIC STIRRER - MANUAL TYPE - STIRS ONE DEEP WELL PLATE |
|
VP 707-1 |
TEMPERATURE CONTROLLED ENVIRONMENTAL CHAMBER FOR CAROUSEL SERIES
LEVITATION STIRRERS |
|
VP 707-1CE |
CE COMPLIANT TEMPERATURE CONTROLLED ENVIRONMENTAL CHAMBER FOR CAROUSEL
SERIES LEVITATION STIRRERS, 230 VOLT, 50 HZ |
|
VP 707-2 |
COUNT DOWN TIMER CONTROL FOR CAROUSEL SERIES LEVITATION STIRRERS |
|
VP 707-3 |
COMPUTER CONTROLLED OPERATION FOR CAROUSEL SERIES LEVITATION STIRRERS |
|
VP 707B1 |
LEVITATION MAGNETIC STIRRER - CAROUSEL TYPE - STIRS 12 DEEP WELL
MICROPLATES, 1 LIFT STATION - 115 VOLTS AC - 60 HZ |
|
VP 707B1CE |
LEVITATION MAGNETIC STIRRER - CAROUSEL TYPE - STIRS 12 DEEP WELL
MICROPLATES, 1 LIFT STATION - 230 VOLTS AC - 50 HZ |
|
VP 707B2 |
LEVITATION MAGNETIC STIRRER - CAROUSEL TYPE - STIRS 12 DEEP WELL
MICROPLATES AT UP TO 56 LIFTS/MINUTE, 2 LIFT STATIONS - 115 VOLTS AC,
60 HZ |
|
VP 707B2CE |
LEVITATION MAGNETIC STIRRER - CAROUSEL TYPE - STIRS 12 DEEP WELL
MICROPLATES AT UP TO 56 LIFTS/MINUTE, 2 LIFT STATIONS - 230 VOLTS AC,
50 HZ, CE COMPLIANT |
|
VP 707B4 |
LEVITATION MAGNETIC STIRRER - CAROUSEL TYPE - STIRS 12 DEEP WELL
MICROPLATES,4 LIFT STATIONS - 115 VOLTS AC - 60 HZ |
|
VP 707B4CE |
LEVITATION MAGNETIC STIRRER - CAROUSEL TYPE - STIRS 12 DEEP WELL
MICROPLATES, 4 LIFT STATIONS - 230 VOLTS AC - 50 HZ |
|
VP 707C |
LINEAR SHUTTLE MAGNETIC LEVITATION STIRRER WITH SERVO MOTOR, 115 V AC 60
HZ, |
|
VP 707CCE |
LINEAR SHUTTLE MAGNETIC LEVITATION STIRRER WITH SERVO MOTOR, 230 V AC 50
HZ, CE COMPLIANT |
|
VP 708-CON |
BASE TO HOLD VP 710C1 VERTICAL WITH 5 SHELVES TO HOLD PLATES ON BOTH
SIDES OF THE STIRRER |
|
VP 708-CON-1 |
VP 710G6 WITH BASE PLATE ON THE END SO THE STIRRER CAN STAND UPRIGHT. |
|
VP
708A |
VORTEX MICROPLATE MAGNETIC LATERAL TUMBLE STIRRER WITH BRUSHLESS MOTOR
115VAC 60 HZ AND DIGITAL RPM READOUT |
|
VP
708ACE |
VORTEX MICROPLATE MAGNETIC LATERAL TUMBLE STIRRER WITH BRUSHLESS MOTOR
230VAC 50 HZ AND DIGITAL RPM READOUT, CE COMPLIANT |
|
VP 708A-1 |
|
|
VP 708A-L-PLATTER |
LANDSCAPE VIEW PLATTER WITH EXPOSED BOTTOM FOR VP 708A |
|
VP 708S |
SUPER VORTEX MICROPLATE MAGNETIC LATERAL TUMBLE STIRRER WITH BRUSHLESS
MOTOR 115VAC 60 HZ AND DIGITAL RPM READOUT |
|
VP 710-3 |
COMPUTER CONTROLLED OPERATION FOR VP 710 ROTARY SERIES TUMBLE STIRRERS |
|
VP 710-RPM |
BATTERY POWERED HALL SENSOR RPM METER |
|
VP 710A |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED - STIRS 9 DEEP WELL PLATES -
115 VOLTS AC - 60 HZ |
|
VP 710ACE |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED - STIRS 9 DEEP WELL PLATES -
230 VOLTS AC - 50 HZ |
|
VP 710C1 |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING
DECK, WITH MOTOR HOUSING AND PLATE HOLDER, STIRS 2 DEEP WELL MICROPLATES
OR 6 STANDARD MICROPLATES-115 VOLTS AC - 60 HZ |
|
VP 710C1CE |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING
DECK, STIRS 2 DEEP WELL MICROPLATES OR 6 STANDARD MICROPLATES -EUROPEAN
230 VOLTS AND 50 HERTZ CONTROLLER, CE COMPLIANT |
|
VP 710C1-7 |
ROTARY MAGNETIC TUMBLE STIRRER, TANDEM MOUNT ROBOT COMPATIBLE, 16.5cm
LONG USABLE STIRRING DECK, WITH MOTOR HOUSING AND PLATE HOLDER, STIRS 4
DEEP WELL MICROPLATES OR 12 STANDARD MICROPLATES-115 VOLTS AC - 60 HZ |
|
VP 710C1-7CE |
ROTARY MAGNETIC TUMBLE STIRRER, TANDEM MOUNT ROBOT COMPATIBLE, 16.5cm
LONG USABLE STIRRING DECK, WITH MOTOR HOUSING AND PLATE HOLDER, STIRS 4
DEEP WELL MICROPLATES OR 12 STANDARD MICROPLATES-230 VOLTS AC - 50 HZ -
CE COMPLIANT |
|
VP 710C1-AIR |
Rotary Tumble Stirrer With VP 710CI Chassis Containing A Magnet Cylinder
And Air Motor With An External Pressure, Volume Control And Muffler |
|
VP 710C1-ALPFX |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING
DECK, MOUNTS TO THE BOTTOM OF V&P FXALP-FM ON THE BECKMAN FX
WORKSTATION, 115 VOLTS AC - 60 HZ |
|
VP 710C1-ALPFXCE |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING
DECK, MOUNTS TO THE BOTTOM OF V&P FXALP-FM ON THE BECKMAN FX
WORKSTATION, 230 VOLTS AC - 50 HZ, CE COMPLIANT |
|
VP 710C1-M |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING
DECK, MOUNTS TO MULTIPLE ROBOT DECKS INCLUDING BECKMAN FX & NX, TECAN
EVO, PERKIN ELMER EP3 & JANUS, CALIPER SCICLONE, HAMILTON MICROLAB STAR
AND MANY OTHERS, 115 VOLTS AC - 60 HZ |
|
VP 710C1-M-KIT |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING
DECK, MOUNTS TO MULTIPLE ROBOT DECKS INCLUDING BECKMAN FX & NX, TECAN
EVO, PERKIN ELMER EP3 & JANUS, CALIPER SCICLONE, HAMILTON MICROLAB STAR
AND MANY OTHERS, 115 VOLTS AC - 60 HZ, INCLUDES, VP 581B, VP 581-PE &
FXALP-PM. |
|
VP 710C1-MCE |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING
DECK, MOUNTS TO MULTIPLE ROBOT DECKS INCLUDING BECKMAN FX & NX, TECAN
EVO, PERKIN ELMER EP3 & JANUS, CALIPER SCICLONE AND HAMILTON MICROLAB
STAR AND MANY OTHERS, 230 VOLTS AC - 50 HZ, CE COMPLIANT |
|
VP 710C1-MCE-KIT |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING
DECK, MOUNTS TO MULTIPLE ROBOT DECKS INCLUDING BECKMAN FX & NX, TECAN
EVO, PERKIN ELMER EP3 & JANUS, CALIPER SCICLONE AND HAMILTON MICROLAB
STAR AND MANY OTHERS, 230 VOLTS AC - 50 HZ, CE COMPLIANT. INCLUDES VP
581B, VP 581-PE AND FXALP-PM |
|
VP 710C1P |
MAGNETIC CYLINDER AND SPINDLE ENDS WITH BEARINGS AND BEARING MOUNTS,
MAGNETIC LENGTH = 15.24 CM, TOTAL LENGTH INCLUDING BEARING BLOCKS AND
SPINDLES ENDS = 23.25 CM |
|
VP 710C1P-7 |
17.78cm (7 Inch) Magnetic Cylinder, ~23.19cm Total Length. Includes End
Caps, Spindles And Bearing. |
|
VP 710E-2 |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 54cm LONG USABLE STIRRING
DECK, STIRS 5 DEEP WELL MICROPLATES -115 VOLTS AC - 60 HZ |
|
VP 710E-2CE |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 54cm LONG - STIRS 5 DEEP
WELL MICROPLATES - 48 MGO MAGNETIC CYLINDER, 230 V - 50 HZ |
|
VP 710E-2HM |
Rotary Magnetic Tumble Stirrer, High Speed, 54cm Long, Deck Made From
MICA - Stirs 3 Deep Well Microplates in VP 743A-1RM, 48 MGO Magnetic
Cylinder, 120 V - 60 HZ |
|
VP 710E-2HM-1 |
|
|
VP 710ECE |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED - 48.3 cm LONG, STIRS 5 DEEP
WELL MICROPLATES - 230 VOLTS AC - 50 HZ |
|
VP 710F |
MINI ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, FLEXIBLE DRIVE, STIRS 1
MICROPLATE ON WORKSTATION DECK, 115 VOLTS AC 60 HZ |
|
VP 710FCE |
MINI ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, FLEXIBLE DRIVE, STIRS 1
MICROPLATE ON WORKSTATION DECK, 230 VOLTS AC 50 HZ |
|
VP 710F2 |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, FLEXIBLE DRIVE, STIRS 4 DEEP
96 WELL MICROPLATES, 5 TO 500 RPM, 115 VOLTS, 60 HZ CONTROLLER |
|
VP 710F2CE |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, FLEXIBLE DRIVE, STIRS 4 DEEP
96 WELL MICROPLATES, 5 TO 500 RPM, EUROPEAN 230 VOLTS AND 50 HERTZ
CONTROLLER, CE COMPLIANT |
|
VP 710FSM |
|
|
VP 710G6 |
ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD AND , 15.3 cm LONG
USABLE STIRRING DECK, MADE WITH ABS PLASTIC, HEAT RESISTANT TO 60 C -115
VOLTS AC - 60 HZ |
|
VP 710G6CE |
ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD AND , 15.3 cm LONG
USABLE STIRRING DECK, MADE WITH ABS -230 VOLTS AC - 50 HZ, CE COMPLIANT |
|
VP 710G6HHT |
ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD AND , 15.3 cm LONG
USABLE STIRRING DECK, MADE WITH PEEK, TORLON AND POLYCARBONATE, HEAT
RESISTANT TO 200 C, HEAT RESISTANT TO 200C -115 VOLTS AC - 60 HZ |
|
VP 710G6HHTCE |
ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD AND , 15.3 cm LONG
USABLE STIRRING DECK, MADE WITH PEEK, TORLON AND POLYCARBONATE, HEAT
RESISTANT TO 200 C, HEAT RESISTANT TO 200C - 230 VOLTS AC - 50 HZ, CE
COMPLIANT |
|
VP 710G11H |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 25 cm LONG USABLE STIRRING
DECK, FOR STIRRING AND HEATING SAMPLES AND THE SAME TIME. -115 VOLTS AC
- 60 HZ |
|
VP 710J |
ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD, MAX SPEED 500 RPM
AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC,
HEAT RESISTANT TO 120C -115 VOLTS AC - 60 HZ |
|
VP 710JCE |
ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD, MAX SPEED 500 RPM
AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC,
HEAT RESISTANT TO 120C - CE COMPLIANT 230 VOLTS - 50 HZ |
|
VP 710J-1 |
ROTARY MAGNETIC TUMBLE STIRRER, MAX Z CLEARANCE, WITH 5 TO 1 GEAR HEAD,
MAX SPEED 500 RPM AND 16cm LONG USABLE STIRRING DECK, MADE WITH
POLYCARBONATE PLASTIC, HEAT RESISTANT TO 120C -115 VOLTS AC - 60 HZ |
|
VP 710J-1CE |
ROTARY MAGNETIC TUMBLE STIRRER, MAX Z CLEARANCE, WITH 5 TO 1 GEAR HEAD,
MAX SPEED 500 RPM AND 16cm LONG USABLE STIRRING DECK, MADE WITH
POLYCARBONATE PLASTIC, HEAT RESISTANT TO 120C - CE COMPLIANT 230 VOLTS -
50 HZ |
|
VP 710J-AIR |
ROTARY MAGNETIC TUMBLE STIRRER, WITH AN AIR MOTOR, MAX SPEED 5000 RPM
AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC,
HEAT RESISTANT TO 120C -115 VOLTS AC - 60 HZ |
|
VP 710MXL7T |
SLOW SPEED (10 to 89 RPM), HIGH TORQUE ROTARY MAGNETIC TUMBLE STIRRER,
16 CM LONG USABLE STIRRING DECK, MADE WITH ABS, EQUIPPED WITH
TACHOMETER-115 VOLTS AC - 60 HZ |
|
VP 710MXL7TCE |
SLOW SPEED (10 to 89 RPM), HIGH TORQUE ROTARY MAGNETIC TUMBLE STIRRER,
16 CM LONG USABLE STIRRING DECK, MADE WITH ABS, EQUIPPED WITH
TACHOMETER-230 VOLTS AC - 50 HZ |
|
VP 710S2 |
SUPER ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED - STIRS PLATFORM WITH 7
FOOT PRINTS FOR STANDARD OR DEEP WELL MICROPLATES - 115 V - 60 HZ, 48
MGO MAGNET |
|
VP 710S2CE |
SUPER ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED - STIRS PLATFORM WITH 7
FOOT PRINTS FOR STANDARD OR DEEP WELL MICROPLATES - 230 V - 50 HZ, CE
COMPLIANT, 48 MGO MAGNET |
|
VP 710SM |
MINI SMART MOTOR TUMBLE STIRRER WITH 15 CM MAGNETIC STIRRED AREA AND
COMPUTER CONTROL, 115V - 60 HZ |
|
VP 710SMHT |
MINI SMART MOTOR TUMBLE STIRRER WITH HEAT RESISTANT DECK FOR HEAT BLOCK
APPLICATIONS AND COMPUTER CONTROL, 115V - 60 HZ |
|
VP 710SMHTCE |
MINI SMART MOTOR TUMBLE STIRRER WITH HEAT RESISTANT DECK FOR HEAT BLOCK
APPLICATIONS AND COMPUTER CONTROL, CE COMPLIANT 230V - 50 HZ |
|
VP 710SM-1 |
LOW PROFILE, MINI SMART MOTOR TUMBLE STIRRER WITH 14 CM STIRRED AREA, 57
MM TALL. COMPUTER CONTROL, 115V - 60 HZ |
|
VP 710SM-1-2 |
LOW PROFILE TUMBLE STIRRER FOR BUBBLE PADDLES WITH 5CM STIRRED AREA, 57
MM TALL, POWERED BY A SMART MOTOR. BOX CONTAINS MOUNTING RIVNUTS ON TOP
AND BOTTOM, 115 VOLTS |
|
VP 710SM-1-2CE |
LOW PROFILE TUMBLE STIRRER FOR BUBBLE PADDLES WITH 5CM STIRRED AREA, 57
MM TALL, POWERED BY A SMART MOTOR. BOX CONTAINS MOUNTING RIVNUTS ON TOP
AND BOTTOM, 230 VOLTS |
|
VP 710SM3P |
MINI SMART MOTOR TUMBLE STIRRER WITH 30cm MAGNETIC STIRRED AREA AND
COMPUTER CONTROL, 115V - 60HZ |
|
VP 710SM4PH |
Smart Motor Tumble Stirrer With 30cm Magnetic Stirred Area And Computer
Control, 115V - 60HZ, Includes Software, MICA Heat Protection and 150C
resistant magnets, price each |
|
VP 710T |
ROTARY TUMBLE STIRRER, PROFILE TABLE MOUNT FOR TECAN, 30 CM STIRRED
AREA, 115 V - 60HZ |
|
VP 711 |
TUMBLE STIR BARS - 1.57mm x 1.91mm x 4.75mm - 1000/PKG |
|
VP 711-1 |
PARYLENE COATED VP 711 STIR BARS- 1.67mm x 2.01mm x 4.80mm - 1000/PKG |
|
VP
711-3 |
TUMBLE STIR BARS - NOT DEBURRED - 1.57mm x 1.9mm x 4.75mm - 1000/PKG |
|
VP 711A-1S |
DROP DISPENSER - 96 FOR VP 711, VP 711-1,VP 711D & VP 711D-1 STIR BARS,
IMPROVED ANTI-JAM VERSION |
|
VP 711A-1SD |
DROP DISPENSER - 96 FOR VP 711, VP 711-1,VP 711D &
VP 711D-1 STIR BARS, IMPROVED ANTI-JAM VERSION FOR DEEP WELL MICROPLATES |
|
VP 711B |
AUTOCLAVEABLE FLIP DISPENSER - 96 HOLES FOR VP 711 |
|
VP 711D |
SUPER TUMBLE STIR DOWELS - 1.93mm DIAMETER, 4.75mm LENGTH - 1000/PKG |
|
VP 711D-1 |
PARYLENE COATED VP 711D SUPER TUMBLE STIR DOWELS - 1.98mm DIAMETER,
4.80mm LENGTH - 1000/PKG |
|
VP
711D-3 |
VP 711D TUMBLE STIR DOWELS - NOT DEBURRED, FOR MACERATING TISSUE,
1000/PKG |
|
VP 712 |
TUMBLE STIR BARS - 1.57mm x 1.91mm x 2.90mm LONG - 1000/PKG |
|
VP 712-1 |
PARYLENE COATED VP 712 TUMBLE STIR BARS- 1.67mm x 2.01mm x 3.00mm LONG -
1000/PKG |
|
VP 712-2 |
PTFE COATED VP 712 TUMBLE STIR BARS - 3.57mm x 3.70mm x 4.85mm LONG -
100/PKG |
|
VP
712-3 |
VP 712 TUMBLE STIR BARS - NOT DEBURRED, FOR MACERATING TISSUE -1000/PKG |
|
VP 712A-1S |
DROP DISPENSER - 96 HOLES FOR VP 712 STIR BARS |
|
VP 712B |
AUTOCLAVEABLE FLIP DISPENSER - 96 HOLES FOR VP 712 STIR BARS |
|
VP 712D |
SUPER TUMBLE STIR DOWELS - 1.93mm DIAMETER, 2.46mm LENGTH - 1000/PKG |
|
VP 716 |
TUMBLE STIR DOWELS - 1.27mm DIAMETER, 1.52mm LENGTH - 1000/PKG |
|
VP 716-1 |
PARYLENE COATED VP 716 - TUMBLE STIR DOWELS - DIAMETER 1.32mm, LENGTH
1.57mm - 1,000/PKG |
|
VP 716A |
DROP DISPENSER - 96 HOLES FOR VP 716 STIR DOWELS |
|
VP 716B |
AUTOCLAVEABLE FLIP DISPENSER - 96 HOLES FOR VP 716 STIR DOWELS |
|
VP 716D |
384 AUTOCLAVEABLE DROP DISPENSER FOR VP 716 STIR DOWELS 1.27mm DIAMETER,
AND 1.52mm LONG |
|
VP 717 |
TUMBLE STIR DOWELS - DIAMETER .457mm, LENGTH .1.20mm - 1000/PKG |
|
VP 717-1 |
PARYLENE COATED VP 717 TUMBLE STIR DOWELS - DIAMETER .52mm, LENGTH
1.26mm - 1000/PKG |
|
VP 718 |
NASA TUMBLE STIR DOWELS - 0.0762 mm DIAMETER, 1mm LENGTH - 1000/PKG |
|
VP 718-D |
TUMBLE STIR DOWELS - 0.0762 mm DIAMETER, 3mm LENGTH - 1000/PKG |
|
VP 718-E |
TUMBLE STIR DOWELS - 0.1524 mm DIAMETER, 3mm LENGTH - 1000/PKG |
|
VP 718-F |
TUMBLE STIR DOWELS - 0.2032 mm DIAMETER, 3mm LENGTH - 1000/PKG |
|
VP 718-G |
TUMBLE STIR DOWELS - 0.2540 mm DIAMETER, 3mm LENGTH - 1000/PKG |
|
VP 719A |
DROP DISPENSER - 48 HOLES FOR VP 719F AND VP 719F-1 STIR DISKS |
|
VP 719F |
SUPER TUMBLE STIR DISCS - 7.95mm DIAMETER, 0.635mm THICK - 1000/PKG |
|
VP 719F-1 |
PARYLENE COATED VP 719F SUPER TUMBLE STIR DISCS - 8.00mm DIAMETER,
0.685mm THICK - 1000/PKG |
|
VP 719F-2 |
PTFE ENCAPSULATED VP 719F SUPER TUMBLE STIR DISCS - 9.46mm DIAMETER,
1.45mm THICK - 100/PKG |
|
VP 720 |
TUMBLE STIR DISCS - 9.53mm DIAMETER, 0.51mm THICK - 1000/PKG |
|
VP 720A |
DROP DISPENSER - 24 HOLES FOR VP 720 STIR DISCS |
|
VP 720B |
AUTOCLAVEABLE DROP DISPENSER - 48 HOLES FOR VP 720 STIR DISCS |
|
VP 720C |
AUTOCLAVEABLE FLIP DISPENSER - 24 HOLES FOR VP 720 |
|
VP 720D |
AUTOCLAVEABLE FLIP DISPENSER - 48 HOLES FOR VP 720 |
|
VP
720F |
SUPER TUMBLE STIR DISCS - 9.53mm DIAMETER, 0.635mm THICK - 1000/PKG |
|
VP 720F-1 |
PARYLENE COATED VP 720F SUPER TUMBLE STIR DISCS - 9.58mm DIAMETER,
0.68mm THICK - 1000/PKG |
|
VP 721A-2 |
DROP DISPENSER - 96 HOLES FOR VP 721F AND VP 721F-1 STIR DISCS -
IMPROVED DESIGN |
|
VP 721A-4S |
DROP DISPENSER - 96 HOLES FOR VP 721F AND VP 721F-1 STIR DISCS -
IMPROVED DESIGN |
|
VP 721A-48S |
DROP DISPENSER - 48 HOLES (ON 13.0 MM CENTERS) FOR VP 721F AND VP 721F-1
STIR DISCS, STAINLESS STEEL PLENUM DOES NOT MOVE AND HAS TRIGGER RELEASE
MECHANISM, STEEL PLENUM HOLE DIAMETER = 5.7 MM |
|
VP 721A-48SD |
Drop Dispenser - 48 Holes (On 13.0mm Centers) For VP 721F And VP 721F-1
Stir Discs, Stainless Steel Plenum Does Not Move And Has Trigger Release
Mechanism, Steel Plenum Hole Diameter = 0.225", Collar Shortened To
1/16”, With 6 Locating Thumb Screws For Deep Well Microplate. |
|
VP 721B |
AUTOCLAVEABLE FLIP DISPENSER - 96 HOLES FOR VP 721F AND VP 721F-1 STIR
DISCS |
|
VP 721BA |
AUTOCLAVEABLE FLIP/DROP DISPENSER - 96 FOR VP 721F AND VP 721F-1 STIR
DISCS |
|
VP 721D |
AUTOCLAVEABLE DROP DISPENSER FOR VP 721F, VP 721F-1 AND VP 722-1 STIR
DISCS INTO 96 WELL MICROPLATES |
|
VP 721F |
SUPER TUMBLE STIR DISCS - 5.08mm DIAMETER, 0.635mm THICK - 1000/PKG |
|
VP 721F-1 |
PARYLENE COATED VP 721F SUPER TUMBLE STIR DISCS - 5.13mm DIAMETER,
0.68mm THICK - 1000/PKG |
|
VP 722A |
DROP DISPENSER - 96 HOLES FOR VP 722F AND VP 722F-1 STIR DISCS |
|
VP 722B |
AUTOCLAVEABLE FLIP DISPENSER - 96 HOLES FOR VP 722F AND VP 722F-1 STIR
DISCS |
|
VP 722F |
TUMBLE STIR DISCS - 3.35mm DIAMETER, 0.63mm THICK - 1000/PKG |
|
VP 722F-1 |
PARYLENE COATED VP 722F SUPER TUMBLE STIR DISCS - 3.46mm DIAMETER,
0.68mm THICK - 1000/PKG |
|
VP 722F-2B |
AUTOCLAVEABLE FLIP DISPENSER - 96 HOLES FOR VP 722F-2 PTFE STIR DISCS |
|
VP 722F-2D |
AUTOCLAVEABLE 96 DROP DISPENSER FOR VP 722F-2 PTFE ENCAPSULATED
STAINLESS STEEL STIR DISCS INTO 96 WELL MICROPLATES |
|
VP 722N-1 |
NICKLE COATED NdFeB MAGNETIC TUMBLE STIR DISCS, 3.38mm IN DIAMETER AND
.0635mm THICK, COATED WITH 0.0254mm THICK PARYLENE, 100/PKG |
|
VP 724 |
TUMBLE STIR DISC - 1.78mm DIAMETER - 0.51mm THICK - 1000/PKG |
|
VP 724-1 |
PARYLENE COATED VP 724 TUMBLE STIR DISCS - 1.83mm DIAMETER, 0.56mm THICK
- 1000/PKG |
|
VP 724A |
DROP DISPENSER - 384 HOLES FOR VP 724 STIR DISCS |
|
VP 724B |
AUTOCLAVEABLE FLIP DISPENSER - 384 HOLES FOR VP 724 |
|
VP 724D-1 |
AUTOCLAVEABLE 384 DROP DISPENSER FOR VP 724F AND VP 724F-1 STIR DISCS
INTO 384 WELL MICROPLATES |
|
VP 724F |
TUMBLE STIR DISCS - 1.78mm DIAMETER, 0.635mm THICK - 1000/PKG |
|
VP 724F-1 |
PARYLENE COATED VP 721F SUPER TUMBLE STIR DISCS - 1.87mm DIAMETER,
0.68mm THICK - 1000/PKG |
|
VP 725 |
LEVITATION STIR BALLS - 2.38mm DIAMETER FOR 384 WELL PLATES - 1000/PKG |
|
VP 725-1 |
PARYLENE COATED VP 725 LEVITATION STIR BALLS - 2.47mm DIAMETER FOR 384
WELL PLATES - 1000/PKG |
|
VP 725-1-40 |
PARYLENE COATED VP 725 LEVITATION STIR BALLS - 2.47mm DIAMETER FOR 384
WELL PLATES - 40,000/BTL |
|
VP 725-1S |
STERILE PARYLENE COATED VP 725 LEVITATION STIR BALLS - 2.47mm DIAMETER
FOR 384 DEEP WELL PLATES - 1000/PKG |
|
VP 725-1S-5 |
STERILE PARYLENE COATED VP 725 LEVITATION STIR BALLS - 2.47mm DIAMETER,
5,000/BOTTLE |
|
VP 725-1S-9 |
STERILE PARYLENE COATED STAINLESS STEEL STIR BALLS - 2.47mm DIAMETER -
9000/BTL |
|
VP 725-1S-40 |
STERILE PARYLENE COATED VP 725 LEVITATION STIR BALLS - 2.47mm DIAMETER-
40,000/BTL |
|
VP 725A |
DROP DISPENSER - 384 HOLES - LOADS 2.38mm DIAMETER BALLS FOR VP 725, VP
725S, VP 725-1 AND VP725-1S INTO DEEP WELL 384 MICROPLATES |
|
VP 725A-1-96S |
DROP DISPENSER - 96 HOLES - LOADS 2.38mm DIAMETER BALLS FOR VP 725, VP
725S, VP 725-1 AND VP 725-1S INTO DEEP WELL 96 MICROPLATES - NEW DESIGN
TOP PLATE FIXED AND BOTTOM PLATE MOVES |
|
VP 725A-1-96SC |
Alignment collar for VP 725A-1-96S Dispenser. Registers to a 96-vial
Symyx Block (SBS footprint) with 8mm OD x 40mm height glass vials. |
|
VP 725A-2-96S |
DROP DISPENSER - 96 HOLES - LOADS TWO 2.48mm DIAMETER BALLS, EITHER VP
725, VP 725S, VP 725-1 AND VP 725-1S INTO 96 WELL MICROPLATES |
|
VP 725B |
AUTOCLAVEABLE FLIP DISPENSER - LOADS 384 DEEP WELL MICROPLATES - 2.38mm
DIAMETER BALLS LOAD INTO ARRAY OF 16 x 24 ON 4.5mm CENTERS |
|
VP 725B-96 |
AUTOCLAVEABLE FLIP DISPENSER - LOADS 96 WELL MICROPLATES - 2.38mm
DIAMETER BALLS LOAD INTO ARRAY OF 8 x 12 ON 9mm CENTERS |
|
VP 725C |
AUTOMATIC DISPENSER THAT LOADS VP 725, VP 725S, VP 725-1 AND VP 725-1S
STAINLESS STEEL BALLS |
|
VP 725C-96 |
AUTOCLAVEABLE HIGH VOLUME SEMI-AUTOMATIC DROP DISPENSER THAT LOADS VP
725, VP 725S, VP 725-1 AND VP 725-1S balls INTO 96 DEEP WELL MICROPLATES |
|
VP 725D |
AUTOCLAVEABLE DROP DISPENSER - LOADS VP 725, VP 725S, VP 725-1 AND VP
725-1S STAINLESS STEEL BALLS INTO 384 DEEP WELL MICROPLATES |
|
VP 725E |
LEVITATION STIR BALLS - 3.97mm DIAMETER FOR 96 ROUND WELL PLATES -
1000/PKG |
|
VP 725E-1 |
PARYLENE COATED VP 725E LEVITATION STIR BALLS - 4.06mm DIAMETER FOR 96
ROUND WELL PLATES - 1000/PKG |
|
VP 725E-1S |
STERILE PARYLENE COATED VP 725E LEVITATION STIR BALLS - 4.06mm DIAMETER
FOR 96 ROUND WELL PLATES - 10,000/BOTTLE |
|
VP 725EA |
DROP DISPENSER - FOR 3.97mm DIAMETER STIR BALLS - 96 WELL FORMAT LOADS
VP 725E, VP 725ES, VP 725E-1, AND VP 725E-1S STAINLESS STEEL BALLS FOR
96 DEEP WELL MICROPLATES |
|
VP 725EB |
AUTOCLAVEABLE FLIP DISPENSER - FOR 3.97mm DIAMETER STIR BALLS - 96 WELL
FORMAT - LOADS VP 725E, VP 725ES, VP 725E-1 AND VP 725E-1S STAINLESS
STEEL BALLS FOR 96 DEEP WELL MICROPLATES |
|
VP 725EC |
AUTOMATIC DISPENSER - THAT LOADS VP 725E, VP 725ES, VP 725E-1, AND VP
725E-1S STAINLESS STEEL BALLS |
|
VP 725ES |
STERILE LEVITATION VP 725E STIR BALLS - 3.97mm DIAMETER FOR 96 ROUND
WELL PLATES - 10,000/BOTTLE |
|
VP 725F |
LEVITATION STIR BALLS - 4.76mm DIAMETER FOR SQUARE 96 WELL PLATES -
1000/PKG |
|
VP 725F-1 |
PARYLENE COATED LEVITATION STIR BALLS - 4.85mm DIAMETER FOR SQUARE 96
WELL PLATES - 1000/PKG |
|
VP 725F-1S |
STERILE PARYLENE COATED LEVITATION STIR BALLS - 4.85mm DIAMETER FOR
SQUARE 96 WELL PLATES - 10,000/BOTTLE |
|
VP 725F-1-1S |
Sterile Parylene Coated Levitation Stir Balls, 4.85mm Diameter For
Square 96 Well Plates, 1,000/Bottle |
|
VP 725FA |
DROP DISPENSER - THAT LOADS VP 725F, VP 725FS, VP 725F-1 AND VP 725F-1S
STAINLESS STEEL BALLS FOR 96 DEEP WELL MICROPLATES |
|
VP 725FB |
AUTOCLAVEABLE FLIP DISPENSER - THAT LOADS VP 725F, VP 725FS, VP 725F-1,
AND VP 725F-1S STAINLESS STEEL BALLS FOR 96 DEEP WELL MICROPLATES |
|
VP 725FB-48DW |
|
|
VP 725FC |
AUTOMATIC DISPENSER - THAT LOADS VP 725F, VP 725FS, VP 725F-1, AND VP
725F-1S STAINLESS STEEL BALLS |
|
VP 725FD |
AUTOCLAVEABLE DROP DISPENSER - THAT LOADS ALL VP 725E SERIES AND VP 725F
SERIES STEEL BALLS FOR 96 DEEP WELL MICROPLATES, EACH |
|
VP 725FS |
STERILE LEVITATION STIR BALLS - 4.76mm DIAMETER FOR SQUARE 96 WELL
PLATES - 10,000/BOTTLE |
|
VP 725G |
LEVITATION STIR BALLS - 5.56mm DIAMETER FOR SQUARE 96 WELL PLATES -
1000/PKG |
|
VP 725G-2 |
LEVITATION STIR BALLS PTFE DIPPED - 5.57mm DIAMETER FOR SQUARE 96 WELL
PLATES - 100/PKG |
|
VP 725RS |
RECYCLED STERILE LEVITATION STIR BALLS - 2.38mm DIAMETER FOR 384 DEEP
WELL PLATES - 50,000/BOTTLE |
|
VP 725S |
STERILE LEVITATION STIR BALLS - 2.38mm DIAMETER FOR 384 DEEP WELL PLATES
- 10,000/BOTTLE |
|
VP 725ZB-3 |
ARABIDOPSIS SEED LOADER, 96 MICROPLATE |
|
VP
730 |
HUMIDITY CHAMBER - FOR MAGNETIC STIRRER |
|
VP
730A |
WATER RESERVOIR/TRAY - FOR ALLIGATOR TUMBLE STIRRER |
|
VP 731 |
TUMBLE POWDER - 0.7 MICRON PARTICLES - 10g IN AN AQUEOUS SLURRY |
|
VP 733 |
STAINLESS STEEL STIR STIX - 1.58mm DIAMETER, 31.8mm LONG - 100/PKG |
|
VP 733-2 |
PTFE ENCAPSULATED S/S TUBE - 2.5 +/- .05mm DIAMETER , 34.6mm +/- .2mm
LONG - 100/PKG |
|
VP 733-2A |
AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 733-2, VP 734-2 AND VP 735-2
PTFE COATED STIR STIXS INTO 96 DEEP WELL MICROPLATES |
|
VP 733-2A-1 |
ALIGNMENT COLLAR FOR 96 TUBE RACKS |
|
VP 733-2B |
AUTOCLAVEABLE FLIP DISPENSER THAT LOADS VP 733-2, VP 734-2 AND VP 735-2
PTFE COATED STIR STIXS INTO 96 DEEP WELL MICROPLATES |
|
VP 733-3A |
AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 733-2, VP 734-2 AND VP 735-2
PTFE COATED STIR STIXS INTO 48 TEST TUBES (12 mm DIAMETER, 75 mm LONG ON
14 mm CENTERS) |
|
VP 734 |
STAINLESS STEEL STIR STIX - 1.58mm DIAMETER, 25.4mm LONG - 100/PKG |
|
VP 734-2 |
PTFE ENCAPSULATED STIR STIX - 2.5 +/- .05mm DIAMETER, 28.2mm +/- .2mm
LONG - 100/PKG |
|
VP 735 |
STAINLESS STEEL STIR STIX - 1.58mm DIAMETER, 19mm LONG - 100/PKG |
|
VP 735-2 |
PTFE ENCAPSULATED S/S TUBE DIAMETER = 2.5 +/- .05mm, LENGTH = 21.8mm +/-
.2mm, 100/PKG |
|
VP
736 |
STAINLESS STEEL STIR STIX - 0.787mm DIAMETER, 12.7mm LONG - 100/PKG |
|
VP
736-1 |
PARYLENE COATED VP 736 STIR STIXS 0.89 mm DIAMETER AND 12.80 mm LONG,
100/ PKG |
|
VP
736A |
AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 736 AND VP 736-1 STIR STIXS
INTO 96 PCR MICROPLATES, INCLUDES VP 771 |
|
VP 736-384A |
AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 736 AND VP 736-1 (.787mm
DIAMETER AND 12.5mm LONG) AND VP 736-1 (0.89mm DIAMETER AND 12.8mm LONG)
STIR STIXS INTO 384 WELL MICROPLATES, INCLUDES VP 771 MAGNET, SIMILAR TO
VP 736A BUT MADE FOR 384 WELL SBS PLATE |
|
VP
737 |
STAINLESS STEEL STIR STIX - 0.787mm DIAMETER, 7.6mm LONG - 1000/PKG |
|
VP
737-1 |
STAINLESS STEEL STIR STIX - 0.89mm DIAMETER, 7.8mm LONG - 1000/PKG |
|
VP 737A |
|
|
VP 740 |
STIR STIX UNLOADER WITH CATCH BASIN |
|
VP 740B |
COLLAR FOR ALIGNING MICRONIC BLOCKS TO VP 540A2 AND VP 540AC |
|
VP 740C |
ADAPTOR TO HOLD VP 540DB ON THE STIR STIX CATCH BASIN HOLDER |
|
VP 741A |
ALUMINUM HEATING BLOCK - FOR ONE DEEP WELL BLOCK, TEMPERATURE CONTROL 25
TO 200° C WITH THERMOCOUPLE |
|
VP 741A-R |
ALUMINUM HEATING BLOCK - FOR ONE DEEP WELL BLOCK, TEMPERATURE CONTROL 25
TO 200° C WITH RTD |
|
VP 741A-RCE |
Aluminum Heating Block For One Deep Well Block, Temperature Control 25
To 200° C With RTD, Watlow Controller, 230 Volt, CE Compliant |
|
VP 741A-RBC |
Aluminum Heating Block For One Deep Well Block, Low Eddy Current Model,
Temperature Control 25 To 200° C With RTD And Computer Control, With
Modification To Minimize Heat Transfer |
|
VP 741A-RM-B |
Aluminum Heating Block For One Deep Well Block, Low Eddy Current Model,
Temperature Control 25 To 200° C With RTD, With Modification To Minimize
Heat Transfer |
|
VP 741AJ |
|
|
VP 741BW-MICA |
ALUMINUM HEATING BLOCK - LOW PROFILE DESIGN FOR ROBOT APPLICATION WITH
PCR PLATES AND STANDARD MICROPLATES, TEMPERATURE CONTROL 25 TO 200° C |
|
VP 741BW-MICA-A |
Aluminum Heating Block For One Microplate, Temperature Control 25 To
200° C, Cutaway Design, With Electrical Cable And Thermocouple Exiting
The Side Of Unit And A VP 581A-MICA On Bottom - Watlow Enclosure |
|
VP 741BWCE-MICA |
ALUMINUM HEATING BLOCK FOR ONE PCR PLATE, TEMPERATURE CONTROL 25 TO 200
DEGREES C, CUTAWAY DESIGN, WITH ELECTRICAL CABLE AND THERMOCOUPLE
EXITING THE SIDE OF UNIT AND A VP 581A ON BOTTOM - WATLOW ENCLOSURE, 230
VOLT, CE COMPLIANT |
|
VP 741BW-RCE-MICA |
ALUMINUM HEATING BLOCK FOR ONE PCR PLATE, TEMPERATURE CONTROL 25 TO 200
DEGREES C, CUTAWAY DESIGN, WITH ELECTRICAL CABLE AND RTD EXITING THE
SIDE OF UNIT AND A VP 581A ON BOTTOM - WATLOW ENCLOSURE, 230 VOLT, CE
COMPLIANT |
|
VP 741BW-R-MICA |
ALUMINUM HEATING BLOCK FOR ONE MICROPLATE, TEMPERATURE CONTROL 25 TO 200
DEGREES C, CUTAWAY DESIGN, WITH ELECTRICAL CABLE AND RTD EXITING THE
SIDE OF UNIT AND A VP 581A ON BOTTOM - WATLOW ENCLOSURE |
|
VP 741-I |
BOTTOM, SIDE AND END HEAT CONDUCTING ALUMINUM SPACERS FOR VP 741 AND VP
743 HEATING BLOCK TO FIT ABGENE'S #AB 0661 DEEP WELL MICROPLATE |
|
VP 741I6A |
96 PCR PLATE HEATING BLOCK/REGISTRATION BLOCK, SBS FOOT PRINT TAPERED
HOLES |
|
VP 741I6B |
CUSTOM ALUMINUM HEAT TRANSFER BASE FOR ABGENE (#AB093) 96 DEEP WELL
MICROPLATE, SBS FOOTPRINT, SCULPTED TO CLOSELY FOLLOW THE OUTSIDE
CONTOURS OF THE PLATE BOTTOM. CAN BE USED ON VP 741BW-R OR ON
COMMERCIALLY AVAILABLE DRY BATH HEATING UNITS |
|
VP 741I6C |
Aluminum Heat Transfer Plate For Abgene (#AB 0661) Or Other Deep Well
Microplate, SBS Footprint, Sculpted To Closely Follow The Outside
Contours Of The Plate Bottom, For Use With VP 741, VP 741A-R And VP 743
Deep Well |
|
VP 743A-1RM |
ALUMINUM HEATING BLOCK - WITH MICA INSULATION FEATURE FOR VP 710E-2HM
DESIGNED - FOR THREE DEEP WELL BLOCKS OR GLASS VIALS, TEMPERATURE
CONTROL 25 TO 200° C, RTD PROBE FOR MAGNETIC STIRRING |
|
VP 744 |
HEATER/CHILLER RECIRCULATING FLUID BLOCK WITH SBS LOCATING FEATURE ON
THE BOTTOM |
|
VP 744A |
HEATER/CHILLER RECIRCULATING FLUID BLOCK WITH SBS LOCATING FEATURE ON
THE BOTTOM AND SBS MICROPLATE ACCEPTING POCKET ON THE FACEPLATE |
|
VP 744B |
Heater/Chiller Recirculating Fluid
Block for deep well or standard microplates. Special design to minimize
eddy currents when used on a Tumble Stirrer. |
|
VP 744MB |
Heater/Chiller Recirculating Fluid
Block for deep well or standard microplates. Special design to minimize
eddy currents when used on a Tumble Stirrer. MICA SBS feature on bottom,
includes screw down lid.
|
|
VP 745 |
HEATER/CHILLER RECIRCULATING FLUID BLOCK FOR VP 750 BUBBLE PADDLE
STIRRER |
|
VP 749-9-32-105 |
|
|
VP 750 |
POLYPROPYLENE BUBBLE PADDLE RESERVOIR; INCLUDES 4 PARYLENE COATED
STAINLESS STEEL BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES |
|
VP 750-13-AL |
ANODIZED ALUMINUM BUBBLE PADDLE RESERVOIR; INCLUDES 1 PARYLENE COATED
STAINLESS STEEL BUBBLE PADDLE WITH 13 BUBBLES AND 2 PTFE HUBS; MIXES
70ml |
|
VP 750-13-PTFE |
PTFE BUBBLE PADDLE RESERVOIR, 12-CHANNEL FORMAT;
INCLUDES 1 STAINLESS STEEL BUBBLE PADDLE WITH 13 BUBBLES
AND 2 PTFE HUBS; MIXES 70ml |
|
VP 750ACFeP |
BUBBLE PADDLE, 13 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM PASSIVATED
STAINLESS STEEL AND COATED WITH PARYLENE, MAGNETIC CLUTCH AND PTFE HUB |
|
VP 750AFeP |
BUBBLE PADDLE, 13 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM PASSIVATED
STAINLESS STEEL AND COATED WITH PARYLENE WITH 2 PTFE HUBS |
|
VP 750AL-2 |
Hydrophilic-Coated Aluminum Reservoir. 127.7mm long, 85.5mm wide,
50mm tall. Flat Bottom, designed to hold VP 750P-ECON-5F
Polycarbonate Frame with four VP 757AFe Bubble Paddles |
|
VP 750D |
DELRIN MAGNETIC BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 4
PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES |
|
VP 750D-SBS |
DELRIN BUBBLE PADDLE RESERVOIR - INCLUDING 4 BUBBLE PADDLES WITH 13
BUBBLES FOR 96 PIPETTES WITH SBS FEATURE ON THE BOTTOM |
|
VP 750-ECON-6 |
ECONOMY BUBBLE PADDLE RESERVOIR MADE WITH A
DISPOSABLE NALGENE RESERVOIR (VP 792D) AND FOUR 11 BUBBLE PADDLES (VP
757FE-1) IN A POLYCARBONATE FRAME CONTAINING PTFE BEARINGS. |
|
VP 750PTFE |
PTFE BUBBLE PADDLE RESERVOIR - INCLUDING 4 BUBBLE PADDLES WITH 13
BUBBLES FOR 96 PIPETTES |
|
VP 750PTFE-SBS |
PTFE BUBBLE PADDLE RESERVOIR - INCLUDING 4 BUBBLE PADDLES WITH 13
BUBBLES FOR 96 PIPETTES WITH SBS FEATURE ON THE BOTTOM |
|
VP 751AFe |
BUBBLE PADDLE, 7 BUBBLES ON 9 mm CENTERS, CONSTRUCTED FROM PASSIVATED
STAINLESS STEEL WITH 2 PTFE HUBS |
|
VP 754CFe |
BUBBLE PADDLE, 17 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM PASSIVATED
STAINLESS STEEL, MAGNETIC CLUTCH |
|
VP 754CMP |
MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 16 PIPETTES
INCLUDING STAINLESS STEEL PADDLE WITH 17 BUBBLES AND MAGNETIC CLUTCH,
WITH INLET AND OUTLET NIPPLES, MIXES 13ml |
|
VP 755ACAL |
BUBBLE PADDLE, 25 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM ANODIZED
ALUMINUM, MAGNETIC CLUTCH AND PTFE HUB |
|
VP 755ACFe |
Bubble Paddle, 25 Bubbles On 4.5mm Centers, Constructed From Passivated
Stainless Steel, Magnetic Clutch And PTFE Hub |
|
VP 755ACFeP |
BUBBLE PADDLE, 25 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM PASSIVATED
STAINLESS STEEL AND COATED WITH PARYLENE, MAGNETIC CLUTCH AND PTFE HUB |
|
VP 755AFeP |
BUBBLE PADDLE, 25 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM PASSIVATED
STAINLESS STEEL AND COATED WITH PARYLENE WITH 2 PTFE HUBS |
|
VP 755AL |
ANODIZED ALUMINUM 8 MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 16 ROWS
OF 24 PIPETTES, WITH DUCTED BOTTOMS TO CONFORM TO 8, PADDLES WITH 25
BUBBLE PADDLES EACH |
|
VP 755C-384C |
Delrin Reservoir With 8 Magnetic Clutch Bubble Paddles For 16 Rows Of 24
Pipettes, With Ducted Bottoms To Conform To 8 Paddles With 25 Bubbles
Each, Inlet And Outlets With Screw Adjustable Overflow Weir And Aluminum
Base For Strength And Heat Exchange |
|
VP 755D |
DELRIN BUBBLE PADDLE RESERVOIR INCLUDING 8 BUBBLE PADDLES WITH 25
BUBBLES FOR 384 PIPETTES |
|
VP 755D-1 |
DELRIN BUBBLE PADDLE RESERVOIR INCLUDING 8 BUBBLE PADDLES WITH 25
BUBBLES FOR 384 PIPETTES, SBS FEATURE MACHINED INTO BASE |
|
VP 756 |
POLYPROPYLENE BUBBLE PADDLE RESERVOIR INCLUDING 1 PARYLENE COATED
STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES WITH 2 PTFE HUBS, MIXES
25ml |
|
VP 756A |
POLYPROPYLENE BUBBLE PADDLE RESERVOIR; INCLUDES 1 PARYLENE COATED
STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND 2 PTFE HUBS; MIXES 50ml |
|
VP 756A-2 |
DELRIN BUBBLE PADDLE RESERVOIR INCLUDING 2 PARYLENE COATED STAINLESS
STEEL BUBBLE PADDLE WITH 9 BUBBLES WITH 4 PTFE HUBS, MIXES 75 ml |
|
VP 756ACAL |
BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM ANODIZED
ALUMINUM, MAGNETIC CLUTCH AND PTFE HUB |
|
VP 756ACFeP |
BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM PASSIVATED
STAINLESS STEEL AND COATED WITH PARYLENE, MAGNETIC CLUTCH AND PTFE HUB |
|
VP 756AFeP |
BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS; CONSTRUCTED FROM PASSIVATED
STAINLESS STEEL AND COATED WITH PARYLENE WITH 2 PTFE HUBS |
|
VP 756C-1 |
IMPROVED DELRIN RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING
PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND
MAGNETIC CLUTCH, MIXES 50ml |
|
VP 756C-1P |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES
INCLUDING PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES
AND MAGNETIC CLUTCH, MIXES 50ml |
|
VP 756C-1PD |
IMPROVED POLYPROPYLENE RESERVOIR WITH SPA BEAD DUCTED BOTTOM. DRAIN TUBE
INSERTED IN BOTTOM DUCTING CONNECTED TO OUTLET, INCLUDES PASSIVATED
STAINLESS STEEL PADDLE COATED WITH PARYLENE. PADDLE HAS 9 BUBBLES AND
MAGNETIC CLUTCH, MIXES 50ml |
|
VP 756C-1P100 |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES
INCLUDING PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES
AND MAGNETIC CLUTCH, MIXES 100ml |
|
VP 756C-1P100T |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES
INCLUDING PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES
AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 100ml, |
|
VP 756C-1PTFE100 |
Improved PTFE Reservoir With Ducted Bottom For 8 Pipettes Including
Parylene Coated Stainless Steel Bubble Paddle With 9 Bubbles And
Magnetic Clutch, Mixes 100ml |
|
VP 756CM-P |
MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES
INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND
MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 15ml |
|
VP 756CM-P1 |
MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES
INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND
MAGNETIC CLUTCH, WITH A SINGLE INLET NIPPLE, MIXES 15ml |
|
VP 756CM-P0 |
MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES
INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND
MAGNETIC CLUTCH, WITH NO NIPPLES, MIXES 15ml |
|
VP 756C-96BPTFE |
PTFE MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 4
PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES, WITH INLET AND OUTLET
NIPPLES AND LIQUID LEVEL CONTROL SYSTEM. |
|
VP 756CP-96B |
DELRIN MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES
6 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES |
|
VP 756CP-96BPTFE |
PTFE MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 6
PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES |
|
VP
756C-96BPTFE-FB |
PTFE MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 4
PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES, OVER FLOW WEIR AND
INLET, FLAT BOTTOM (NO CHANNELS) WITH ROUNDED EDGES |
|
VP 756CS_PTFE |
PTFE BUBBLE PADDLE RESERVOIR WITH 8 PIPETTE DEPRESSIONS AT 38.1mm
INTERVALS, DEPTH = 30 mm, WIDTH = 10 mm, OUTSIDE DIMENSIONS = HEIGHT =
40 mm, WIDTH = 31mm, LENGTH = 318 mm |
|
VP 756CT |
RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED
STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH INLET
AND OUTLET NIPPLES, MIXES 50 ml |
|
VP 756C-1T |
IMPROVED DELRIN RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING
PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC
CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 50 ml |
|
VP 756C-1PT |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES
INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND
MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 50 ml |
|
VP 757AFe |
BUBBLE PADDLE, 11 BUBBLES ON 9 mm CENTERS, CONSTRUCTED FROM PASSIVATED
STAINLESS STEEL WITH 2 PTFE HUBS |
|
VP 757AL |
HYDROPHILIC COATED ALUMINUM BUBBLE PADDLE RESERVOIR - INCLUDING 6 BUBBLE
PADDLES WITH 7 BUBBLES FOR 96 PIPETTES WITH SBS DIMENSIONS |
|
VP 758-3 |
IMPROVED DELRIN RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING
ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED REPLACEABLE DRIVE
SHAFT, MIXES 50ml |
|
VP 758-3P |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES
INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED REPLACEABLE
DRIVE SHAFT, MIXES 50ml |
|
VP 758-3MAX |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 12 PIPETTES
INCLUDING ALUMINUM PADDLE WITH 13 BUBBLES AND DOUBLE SEALED REPLACEABLE
DRIVE SHAFT, MIXES 400ml |
|
VP 758-3PTFE |
IMPROVED PTFE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING
ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED REPLACEABLE DRIVE
SHAFT, MIXES 50ml |
|
VP 758-4PTFE |
IMPROVED PTFE RESERVOIR WITH DUCTED
BOTTOM FOR 8 PIPETTES INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES
AND DOUBLE SEALED DRIVE SHAFT, MIXES 125 ml |
|
VP 758-3S |
REPLACEMENT SEAL BEARING FOR VP 758-3, VP 758-3P OR VP 758-3PTFE,
INCLUDES SHAFT |
|
VP 758AL |
NEW DESIGN ALUMINUM BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS, OR USE WITH
SEALED BEARING BUBBLE PADDLE RESERVOIR, FOR USE WITH VP 758-3) |
|
VP 758M |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES
INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED DRIVE SHAFT,
WITH INLET AND OUTLET NIPPLES, MIXES 15 ml |
|
VP 759 |
DELRIN BUBBLE PADDLE RESERVOIR WITH DUCTED BOTTOM FOR 96 PIPETTES
INCLUDING 4 ALUMINUM BUBBLE PADDLES COATED WITH PARYLENE. |
|
VP 759AL |
NEW DESIGN ALUMINUM BUBBLE PADDLE, 13 BUBBLES ON 9mm CENTERS, FOR USE ON
VP 759, VP 759P AND VP 759PTFE |
|
VP 759P |
POLYPROPYLENE BUBBLE PADDLE RESERVOIR WITH DUCTED BOTTOM FOR 96 PIPETTES
INCLUDING 4 ALUMINUM BUBBLE PADDLES COATED WITH PARYLENE. |
|
VP 759PTFE |
PTFE BUBBLE PADDLE RESERVOIR WITH DUCTED BOTTOM FOR 96 PIPETTES
INCLUDING 4 ALUMINUM BUBBLE PADDLES COATED WITH PARYLENE. |
|
VP 760 |
MICROPLATES WITH TUMBLE STIRRERS - INQUIRE FOR SPECIFIC PRICING |
|
VP 760A |
MEGA BUBBLE PADDLE STIRRER WITH 11 LITER RESERVOIR |
|
VP 760B |
MINI BUBBLE PADDLE STIRRER WITH 0.5 LITER RESERVOIR |
|
VP 761-1 |
VARIABLE POWER SUPPLY, MOTOR AND MAGNETIC CLUTCH FOR VP 756C-1 |
|
VP 761-1CE |
CE MARK VARIABLE POWER SUPPLY, MOTOR AND MAGNETIC CLUTCH FOR VP 756C-1,
OPERATES OFF 230 VOLTS |
|
VP 761M |
VARIABLE POWER SUPPLY & MINIATURE MOTOR AND MAGNETIC CLUTCH FOR VP
756CMP OPERATES OFF 120 VOLTS |
|
VP 761MCE |
CE COMPLIANT VARIABLE POWER SUPPLY & MINIATURE MOTOR AND MAGNETIC CLUTCH
FOR VP 756CMP OPERATES OFF 230 VOLTS |
|
VP 761S |
VARIABLE POWER SUPPLY & 22 MM MOTOR AND MAGNETIC CLUTCH FOR VP
756CS-PTFE, MOTOR HOUSING FROM PTFE, REQUIRES 120 VOLTS |
|
VP 761SCE |
CE COMPLIANT 24 VOLT VARIABLE POWER SUPPLY & 22 MM MOTOR AND MAGNETIC
CLUTCH FOR VP 756CS-PTFE, MOTOR HOUSING FROM PTFE, REQUIRES 230 VOLTS |
|
VP 762 |
DC SERVO MOTOR, POWER SUPPLY HOUSING AND MAGNETIC CLUTCH FOR VP 756C
BUBBLE PADDLE RESERVOIR, OPERATES OFF 120 VOLTS |
|
VP 762CE |
CE MARK DC SERVO MOTOR, POWER SUPPLY HOUSING AND MAGNETIC CLUTCH FOR VP
756C BUBBLE PADDLE RESERVOIR, OPERATES OFF 230 VOLTS |
|
VP 763B |
POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 4
MAGNETIC CLUTCHES FOR VP 756C-96B, OPERATES OFF 120 VOLTS. EQUIPPED
WITH HEAT EXCHANGER TO CONTROL TEMPERATURE OF THE RESERVOIR. |
|
VP 763BCE |
CE MARK POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN
WITH 4 MAGNETIC CLUTCHES FOR VP 756C-96B, OPERATES OFF 230 VOLTS.
EQUIPPED WITH HEAT EXCHANGER TO CONTROL TEMPERATURE OF THE RESERVOIR. |
|
VP 763CE |
CE MARK POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN
WITH 4 MAGNETIC CLUTCHES FOR VP 756C-96, OPERATES OFF 230 VOLTS |
|
VP 765B |
POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 6
MAGNETIC CLUTCHES FOR VP 756CP-96B, OPERATES OFF 120 VOLTS |
|
VP 765BCE |
CE MARK POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN
WITH 6 MAGNETIC CLUTCHES FOR VP 756CP-96B, OPERATES OFF 230 VOLTS |
|
VP 767-2 |
IMPROVED POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR VP 758-3 SEALED
DRIVE SHAFT SYSTEM, OPERATES OFF 120 VOLTS WITH BANANA PLUG |
|
VP 767-2CE |
IMPROVED CE MARK POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR SEALED
DRIVE SHAFT SYSTEM, OPERATES OFF 230 VOLTS, COUPLES TO VP 758-3 |
|
VP 767-2MAX |
IMPROVED POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR VP 758-3MAX SEALED
DRIVE SHAFT SYSTEM, OPERATES OFF 120 VOLTS WITH BANANA PLUG |
|
VP 767M |
POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR VP 758M SEALED DRIVE SHAFT
SYSTEM, OPERATES OFF 120 VOLTS |
|
VP 767M-CE |
CE MARK POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR VP 758M SEALED
DRIVE SHAFT SYSTEM, OPERATES OFF 230 VOLTS |
|
VP 768B |
POWER SUPPLY/DRIVE, MAXON DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN
WITH 8 MAGNETIC CLUTCHES FOR VP 755C-384B, WITH HEAT EXCHANGER BUILT IN. |
|
VP 768BCE |
CE MARK 230 VOLT POWER SUPPLY/DRIVE, MAXON DC BRUSH TYPE MOTOR WITH
HOUSING, GEAR TRAIN WITH 8 MAGNETIC CLUTCHES FOR VP 755C-384B, WITH HEAT
EXCHANGER BUILT IN. |
|
VP 769 |
POWER SUPPLY, MOTOR HOUSING AND GEAR SYSTEM FOR VP 759, VP 759P AND VP
759PTFE 4 SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 120 VOLTS |
|
VP 769CE |
POWER SUPPLY, MOTOR HOUSING AND GEAR SYSTEM FOR VP 759, VP 759P AND VP
759PTFE 4 SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 230 VOLTS, CE
COMPLIANT |
|
VP 770 |
MAGNETIC LOADER AND UNLOADER SYSTEM FOR REMOVING STIRRERS FROM WELLS |
|
VP 770B |
MAGNETIC LOADER FOR VP 779-5A |
|
VP 771 |
HEAVY DUTY MAGNETIC STIR ELEMENT PICKUP SYSTEM AND STIR STIX LOADER |
|
VP 771-PD |
Magnetic Bead Pellet Disrupter for robotic or
manual disruption of pelleted beads in the wells of a microplate |
|
VP 771-PR |
Magnetic Bead Pellet Resuspender for robotic or manual pulling of
pelleted beads through the column of a microplate |
|
VP
771BT-G-4-1 |
425 Round Post NdFeB 48 MGO Magnetic Bead Separation Block For 384 Flat
Bottom and 384 PCR Microplates. Made to fit in Bio Tek plate washer,
price each |
|
VP
771BT-H-1 |
329 Round Post NdFeB 48 MGO Magnetic Bead Separation Block For 96 Flat
Bottom Microplates And 96 PCR Plates. Made To Fit In BioTek Plate
Washer. |
|
VP 771BT-R-1 |
96 Round Post NdFeB 52 MGO Magnetic Bead Separation Block For 96 Flat
Bottom Plates. Made to fit in Bio Tek plate washer. |
|
VP 771BT-Q-1 |
384 Round Post NdFeB 48 MGO Magnetic Bead Separation Block For 384 Flat
Bottom Plates. Made to fit in Bio Tek plate washer. |
|
VP 771C |
LOADING MAGNET FOR VP 779-5A, 4" BY 6" BY 1" , MAGNET ENCASED IN WHITE
ABS |
|
VP 771E-2 |
24 POST MAGNETIC BEAD SEPARATOR FOR 96 WELL MICROPLATES, 48 MGO NdFeB
MAGNETS - FAST SEPARATION MAGNETS |
|
VP 771F |
NON-MAGNETIC ADAPTOR BLOCK TO MIMIC MAGNETIC COLLECTOR/SEPARATOR BLOCK
VP 771E |
|
VP 771G-4 |
ROBOT 425 ROUND POST MAGNETIC BEAD SEPARATION BLOCK FOR 384 FLAT BOTTOM
AND 384 PCR MICROPLATES, 425 VP 783NC-3-6 MAGNETS (48 MGO), SBS
FOOTPRINT. MATES TO AND INCLUDES A LOW PROFILE ROBOT DECK ADAPTOR (VP
771G-4R) |
|
VP 771G-4A |
A ROBOT COMPATIBLE 425 ROUND POST MAGNETIC BEAD SEPARATION BLOCK WITH
CUT AWAY DESIGN FOR ALL 384 FLAT BOTTOM AND 384 PCR MICROPLATES, 425
VP 783NC-3-6 MAGNETS (48 MGO), SBS FOOTPRINT. MATES TO AND INCLUDES A
LOW PROFILE ROBOT DECK ADAPTOR (VP 771G-4R) |
|
VP 771G-4W |
ROBOT 425 ROUND POST MAGNETIC BEAD SEPARATION BLOCK FOR 384 FLAT BOTTOM
AND 384 PCR MICROPLATES, 425 VP 783NC-3-6 MAGNETS (48 MGO), WHITE
POLYCARBONATE, SBS
FOOTPRINT. MATES TO AND INCLUDES A LOW PROFILE ROBOT DECK ADAPTOR (VP
771G-4R) |
|
VP 771G-4M |
MANUAL 425 ROUND POST MAGNETIC BEAD SEPARATION BLOCK FOR 384 FLAT BOTTOM
AND 384 PCR MICROPLATES, AND 425 VP 783NC-3-6 MAGNETS (48 MGO), SBS
FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM FOR USE WITH MANUAL
ASPIRATION AND DISPENSING MANIFOLDS |
|
VP
771G-4MW |
MANUAL 425 ROUND POST MAGNETIC BEAD SEPARATION BLOCK FOR 384 FLAT BOTTOM
AND 384 PCR MICROPLATES, AND 425 VP 783NC-3-6 MAGNETS (48 MGO), WHITE
POLYCARBONATE, SBS
FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM FOR USE WITH MANUAL
ASPIRATION AND DISPENSING MANIFOLDS |
|
VP 771G-4R |
LOW PROFILE SBS REGISTRATION ADAPTOR PLATE FOR ROBOT APPLICATIONS. MATES
TO ALL MAGNETIC SEPARATION BLOCKS |
|
VP 771G-4RM |
HIGH PROFILE SBS REGISTRATION ADAPTOR PLATE FOR MANUAL ASPIRATION AND
DISPENSING APPLICATIONS. MATES TO ALL MAGNETIC SEPARATION BLOCKS |
|
VP 771G-4S |
425 MAGNETIC POST SEPARATION BLOCK FOR 384 WELL MICROPLATES, WITH 384
DEPRESSIONS FOR PCR CONES AND TRACE TO ALLOW SKIRT TO DROP DOWN. RED
ANODIZED AND SBS FOOTPRINT. MATES TO VP 771G-4R AND VP 771G-4RM. |
|
VP 771H |
ROBOT 329 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 FLAT
BOTTOM MICROPLATES OR 96 WELL CONICAL WELL PCR PLATES WITH 329 VP
783NC-3-6 MAGNETS (48 MGO), RED ANODIZED SBS FOOTPRINT. MATES TO AND
INCLUDES A LOW PROFILE ROBOT DECK ADAPTOR (VP 771G-4R). PRICE EACH |
|
VP 771HW |
ROBOT 329 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 FLAT
BOTTOM MICROPLATES OR 96 WELL CONICAL WELL PCR PLATES WITH 329 VP
783NC-3-6 MAGNETS (48 MGO), WHITE POLYCARBONATE, SBS FOOTPRINT. MATES TO AND
INCLUDES A LOW PROFILE ROBOT DECK ADAPTOR (VP 771G-4R). PRICE EACH |
|
VP 771HM |
MANUAL 329 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 FLAT
BOTTOM MICROPLATES OR 96 WELL CONICAL WELL PCR PLATES WITH 329 VP
783NC-3-6 MAGNETS (48 MGO) IN THE HOLES, RED ANODIZED SBS FOOTPRINT.
MATES TO AND INCLUDES VP 771G-4RM FOR USE WITH MANUAL ASPIRATION AND
DISPENSING MANIFOLDS. PRICE EACH |
|
VP 771HMW |
MANUAL 329 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 FLAT
BOTTOM MICROPLATES OR 96 WELL CONICAL WELL PCR PLATES WITH 329 VP
783NC-3-6 MAGNETS (48 MGO) IN THE HOLES, WHITE POLYCARBONATE, SBS FOOTPRINT.
MATES TO AND INCLUDES VP 771G-4RM FOR USE WITH MANUAL ASPIRATION AND
DISPENSING MANIFOLDS. PRICE EACH |
|
VP
771HW-1-HC4 |
Handheld
329 Round Post NdFeB Magnetic Bead Separator Block For 96 Well Flat
Bottom Plates Or 96 Well Conical Well Plates Top Magnetic Frame Is White
Polycarbonate, Adjustable Clip System Holds Plate On Magnets. O-Ring
On Base Plate Facilitates Gripping. Each. |
|
VP 771I |
ROBOT 204 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 384 WELL
CONICAL WELL PCR PLATES WITH 425 HOLES DRILLED IN IT, WITH 204 VP
783NC-3-6 MAGNETS (48 MGO) IN THE HOLES, RED ANODIZED SBS FOOTPRINT.
MATES TO A LOW PROFILE ROBOT DECK ADAPTOR (VP 771G-4R). PRICE EACH |
|
VP 771IW |
ROBOT 204 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 384 WELL
CONICAL WELL PCR PLATES WITH 425 HOLES DRILLED IN IT, WITH 204 VP
783NC-3-6 MAGNETS (48 MGO) IN THE HOLES, WHITE POLYCARBONATE, SBS FOOTPRINT.
MATES TO A LOW PROFILE ROBOT DECK ADAPTOR (VP 771G-4R). PRICE EACH |
|
VP 771IM |
MANUAL 204 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 384 WELL
CONICAL WELL PCR PLATES WITH 204 VP 783NC-3-6 MAGNETS (48 MGO), RED
ANODIZED SBS FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM FOR USE WITH
MANUAL ASPIRATION AND DISPENSING MANIFOLDS. PRICE EACH |
|
VP 771IMW |
MANUAL 204 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 384 WELL
CONICAL WELL PCR PLATES WITH 204 VP 783NC-3-6 MAGNETS (48 MGO), WHITE
POLYCARBONATE, SBS FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM FOR USE WITH
MANUAL ASPIRATION AND DISPENSING MANIFOLDS. PRICE EACH |
|
VP 771J |
ROBOT 96 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 WELL
MICROPLATES WITH 96 VP 783NC-3-6 MAGNETS (48 MGO) IN THE HOLES, RED
ANODIZED, SBS FOOTPRINT. MATES TO AND INCLUDES A LOW PROFILE ROBOT DECK
ADAPTOR (VP 771G-4R) |
|
VP 771JW |
ROBOT 96 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 WELL
MICROPLATES WITH 96 VP 783NC-3-6 MAGNETS (48 MGO) IN THE HOLES, WHITE
POLYCARBONATE, SBS FOOTPRINT. MATES TO AND INCLUDES A LOW PROFILE ROBOT DECK
ADAPTOR (VP 771G-4R) |
|
VP 771JM |
MANUAL 96 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 WELL
MICROPLATES WITH 96 VP 783NC-3-6 MAGNETS (48 MGO), RED ANODIZED, SBS
FOOTPRINT. MATES TO AND INCLUDES A VP 771G-4RM FOR USE WITH MANUAL
ASPIRATION AND DISPENSING MANIFOLDS |
|
VP 771JMW |
MANUAL 96 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 WELL
MICROPLATES WITH 96 VP 783NC-3-6 MAGNETS (48 MGO), WHITE POLYCARBONATE, SBS
FOOTPRINT. MATES TO AND INCLUDES A VP 771G-4RM FOR USE WITH MANUAL
ASPIRATION AND DISPENSING MANIFOLDS |
|
VP 771K |
ROBOT 56 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 48 DEEP WELL
MICROPLATES (6 COLUMNS X 8 ROWS), WITH 56 VP 783NC-3-6 MAGNETS (48 MGO),
RED ANODIZED SBS FOOTPRINT. MATES TO AND INCLUDES A LOW PROFILE ROBOT
DECK ADAPTOR (VP 771G-4R) |
|
VP 771KM |
MANUAL 56 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 48 DEEP
WELL MICROPLATES (6 COLUMNS X 8 ROWS),WITH 56 VP 783NC-3-6 MAGNETS (48
MGO), RED ANODIZED SBS FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM FOR
USE WITH MANUAL ASPIRATION AND DISPENSING MANIFOLDS |
|
VP 771L |
ROBOT 24 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 WELL PCR
PLATES, WITH 24 VP 783NC-3-6 MAGNETS (42 MGO), RED ANODIZED SBS
FOOTPRINT. MATES TO AND INCLUDES A LOW PROFILE ROBOT DECK ADAPTOR (VP
771G-4R). PRICE EACH |
|
VP 771L-1 |
PCR PLATE HOLDER FOR USE WITH TECAN HYDROFLEX PLATE WASHER, POSITIONS
PCR PLATE SECURELY OVER MAGNETS IN PLATE WASHER TRAY, WITH BOTTOM OF
EACH WELL DIRECTLY ON TOP AND TOUCHING MAGNET. PRICE EACH. |
|
VP 771LA |
ROBOT 24 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 WELL PCR
PLATES, WITH 24 VP 783NC-3-6 MAGNETS (48 MGO). RED ANODIZED SBS
FOOTPRINT. MATES TO AND INCLUDES A LOW PROFILE ROBOT DECK ADAPTOR (VP
771G-4R). PRICE EACH |
|
VP 771LAM |
MANUAL 24 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 WELL PCR
PLATES, WITH 24 VP 783NC-3-6 MAGNETS (48 MGO). RED ANODIZED SBS
FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM FOR USE WITH MANUAL
ASPIRATION AND DISPENSING MANIFOLDS. PRICE EACH |
|
VP 771LB-1 |
24 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 WELL PCR
PLATES, WITH 24 MAGNETS(42 MGO) |
|
VP 771LB-1B |
|
|
VP 771LB-2 |
24 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 WELL PCR
PLATES, WITH 24 MAGNETS(42 MGO).
OVERSIZED FOOTPRINT TO FIT IN HAMILTON STAR. |
|
VP 771LB-3 |
Robot 24 Round Post NdFeB Magnetic Bead Separator Block For 96 Well PCR
Plates, With 24 Magnets (1/4" Dia., 3/32" Thick, 42 MGO), Red Anodized,
SBS Footprint. PCR Plate Is Centered In Separator Block. Mates To And
Includes A Low Profile Robot Deck Adaptor (VP 771G-4R). Price Each |
|
VP
771LC-1C |
|
|
VP 771LM |
MANUAL 24 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 WELL PCR
PLATES, WITH 24 VP 783NC-3-6 MAGNETS (42 MGO), RED ANODIZED SBS
FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM FOR USE WITH MANUAL
ASPIRATION AND DISPENSING MANIFOLDS |
|
VP 771MA |
MANUAL 4 BAR NDFEB MAGNETIC BEAD SEPARATOR BLOCK
FOR 24 WELL MICROPLATES, WITH 4 SLOTS AND 4 VP 783NR-3-12-75 BAR MAGNETS
(50 MGO), RED ANODIZED SBS FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM
FOR USE WITH MANUAL ASPIRATION AND DISPENSING MANIFOLDS |
|
VP 771MA-1 |
SPACER FOR VP 771MA TO ALLOW FOR A BROADER
COMPATIBILITY OF PLATES. |
|
VP 771MM |
MANUAL 7 BAR NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96, 48 (SOME), 24
OR 6 WELL MICROPLATES, WITH 7 SLOTS AND 7 VP 783NR-3-12-75 BAR MAGNETS
(50 MGO), RED ANODIZED SBS FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM
FOR USE WITH MANUAL ASPIRATION AND DISPENSING MANIFOLDS |
|
VP 771NM |
MANUAL 111 SQUARE POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 DEEP
WELL MICROPLATES WITH 111 VP 783NR-3-3-28 MAGNETS (52 MGO), RED ANODIZED
SBS FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM FOR USE WITH MANUAL
ASPIRATION AND DISPENSING MANIFOLDS. |
|
VP 771OM |
MANUAL 117 SQUARE POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 DEEP
WELL MICROPLATES WITH 213 SQUARE LATTICE HOLES WITH 117 VP 783NR-3-3-28
MAGNETS (52 MGO), RED ANODIZED SBS FOOTPRINT. MATES TO AND INCLUDES VP
771G-4RM FOR USE WITH MANUAL ASPIRATION AND DISPENSING MANIFOLDS. |
|
VP 771PM |
MANUAL 24 SQUARE POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 DEEP
WELL MICROPLATES WITH 213 SQUARE LATTICE HOLES WITH 24 VP 783NR-3-3-28
MAGNETS (52 MGO) IN THE SQUARE HOLES, RED ANODIZED SBS FOOTPRINT. MATES
TO AND INCLUDES VP 771G-4RM FOR USE WITH MANUAL ASPIRATION AND
DISPENSING MANIFOLDS. |
|
VP 771Q |
ROBOT 384 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 384 WELL
MICROPLATES WITH 384 VP 783NC-3-6 MAGNETS (48 MGO) UNDERNEATH THE CENTER
OF THE WELL, RED ANODIZED,SBS FOOTPRINT. MATES TO AND INCLUDES A LOW
PROFILE ROBOT DECK ADAPTOR (VP 771G-4R) |
|
VP 771QM |
MANUAL 384 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 384 WELL
MICROPLATES WITH 425 VP 783NC-3-6 MAGNETS (48 MGO), RED ANODIZED SBS
FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM FOR USE WITH MANUAL
ASPIRATION AND DISPENSING MANIFOLDS. |
|
VP
771QW-1-HC4 |
Handheld 384 Round Post NdFeB Magnetic Bead Separator Block For 384 Well
Microplates With 384 NdFeB Magnets (52 MGO) Centered Under Each Well.
O-Ring On Base Plate Facilitates Gripping. |
|
VP 771R |
ROBOT 96 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 WELL
PLATES WITH 96 - 1/4" x 1/4" (52 MGO) NdFeB MAGNETS PLACED UNDER THE
WELL AND CENTERED,RED ANODIZED, SBS FOOTPRINT. MATES TO AND INCLUDES A
LOW PROFILE ROBOT DECK ADAPTOR (VP 771G-4R). |
|
VP 771RM |
96 ROUND POST NdFeB MAGNETIC BEAD SEPARATION BLOCK FOR 96 WELL FLAT
BOTTOM PLATES |
|
VP 771Z-384 |
Adjustable registration jig to hold pipet tips off the bottom of 384
well Microplates on V&P magnetic separation |
|
VP 772 |
SUPER MAGNET UNLOADING SYSTEM |
|
VP 772-CF25 |
MAGNETIC STIR ELEMENT TO FIT CORNING 500ml PP CENTRIFUGE TUBE (#431123).
INCLUDES STAINLESS STEEL ASPIRATION TUBE. |
|
VP 772A |
SUPER MAGNET STIR ELEMENT REMOVER WITH CROSS CONTAMINATION CONTROL |
|
VP 772BK-N42-11-23 |
Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long. PEEK Encapsulated
NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. 10/Pkg |
|
VP 772BK-N42-11-36 |
Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long. PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. 10/Pkg |
|
VP 772BK-N42-11-48 |
Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long. PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. 10/Pkg |
|
VP 772BK-N42-11-61 |
Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long. PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. 10/Pkg |
|
VP 772BK-N52-11-23 |
Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long. PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. 10/Pkg |
|
VP 772BK-N52-11-36 |
Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long. PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. 10/Pkg |
|
VP 772BK-N52-11-48 |
Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long. PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. 10/Pkg |
|
VP 772BK-N52-11-61 |
Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long. PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. 10/Pkg |
|
VP 772BK-S29-11-23 |
Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long. PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. 10/Pkg |
|
VP 772BK-S29-11-36 |
Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long. PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. 10/Pkg |
|
VP 772BK-S29-11-48 |
Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long. PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. 10/Pkg |
|
VP 772BK-S29-11-61 |
Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long. PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. 10/Pkg |
|
VP 772BN-24-127 |
PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP
782N-12, SANDWICH STYLE, 15.25 MM DIAMETER BODY, 24 MM DIAMETER ENDS,
127.4 MM LONG, EACH |
|
VP 772BN-49-76 |
PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP
782NC-8-13, SANDWICH STYLE, 30 MM DIAMETER BODY, 49 MM DIAMETER ENDS,
76.2 MM LONG, EACH |
|
VP 772BN-49-127 |
PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP
782NC-8-13, SANDWICH STYLE, 30 MM DIAMETER BODY, 49 MM DIAMETER ENDS,
127 MM LONG, EACH |
|
VP 772BN-49-152 |
PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP
782NC-8-13, SANDWICH STYLE, 30 MM DIAMETER BODY, 49 MM DIAMETER ENDS,
151.9 MM LONG, EACH |
|
VP 772BN-49-253 |
PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP
782NC-8-13, SANDWICH STYLE, 30 MM DIAMETER BODY, 51 MM DIAMETER ENDS,
253 MM LONG, EACH |
|
VP 772BP-N42-11-23 |
Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long. PTFE Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. 10/Pkg |
|
VP 772BP-N42-11-36 |
Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long. PTFE Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. 10/Pkg |
|
VP 772BP-N42-11-48 |
Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long. PTFE Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. 10/Pkg |
|
VP 772BP-N42-11-61 |
Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long. PTFE Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. 10/Pkg |
|
VP 772BP-N52-11-23 |
Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long. PTFE Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. 10/Pkg |
|
VP 772BP-N52-11-36 |
Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long. PTFE Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. 10/Pkg |
|
VP 772BP-N52-11-48 |
Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long. PTFE Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. 10/Pkg |
|
VP 772BP-N52-11-61 |
Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long. PTFE Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. 10/Pkg |
|
VP 772BP-S29-11-23 |
Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long. PTFE Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. 10/Pkg |
|
VP 772BP-S29-11-36 |
Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long. PTFE Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. 10/Pkg |
|
VP 772BP-S29-11-48 |
Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long. PTFE Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. 10/Pkg |
|
VP 772BP-S29-11-61 |
Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long. PTFE Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. 10/Pkg |
|
VP 772F |
MAGNETIC BEAD SEPARATOR JIG FOR FOUR 100 ml GLASS OR 250 ML NALGENE
BOTTLES, USES 2 NdFeB MAGNETS |
|
VP 772F3 |
SINGLE MAGNETIC SEPARATION STAND FOR 1.5 ML MICRO-CENTRIFUGE TUBES WITH
ONE 6.35MM DIAMETER AND 6.35MM TALL MAGNETIC CYLINDER MADE FROM 52 MGO
NdFeB - PRICE EACH |
|
VP 772F5 |
SINGLE MAGNETIC SEPARATION STAND FOR 1.5 ML MICRO-CENTRIFUGE TUBES WITH
TWO 6.35MM DIAMETER AND 6.35MM TALL MAGNETIC CYLINDERS MADE FROM 52 MGO
NdFeB - PRICE EACH |
|
VP 772F1M |
MAGNETIC BEAD SEPARATOR JIG FOR EIGHT 50 ML CONICAL TEST TUBES |
|
VP 772F1R |
TUBE RACK FOR VP 772F1M MAGNETIC SEPARATOR. RACK HOLDS EIGHT 50 ML
CONICAL TEST TUBES |
|
VP 772F2M-1 |
Magnetic Bead Separator Base For A Variety of Tubes, Used With Any Of
The Following Tube Racks, VP 772F2R-1, VP 772F2R-2, VP 772F2R-3. Clear
Polycarbonate, White ABS, And Stainless Steel Rods. SBS Footprint. Each. |
|
VP
772F2M-1B |
Non-Magnetic Base For Tube Racks VP 772F2R-1, VP 772F2R-2, VP 772F2R-3.
Similar To VP 772F2M-1 But Without Magnet. Clear Polycarbonate And
Stainless Steel Rods. SBS footprint. Each. |
|
VP
772F2M-1kit1 |
VP 772F2M-1kit1 Magnetic Bead Separator System |
|
VP
772F2M-1kit2 |
VP 772F2M-1kit2 Magnetic Bead Separator System |
|
VP
772F2M-1kit3 |
VP 772F2M-1kit3 Magnetic Bead Separator System |
|
VP 772F2R-1 |
Tube Rack For VP 772F2M-1 Magnetic Bead Separator, For Use With 1.5ml
Tubes (13mm OD), With 18mm Spacing. Clear Polycarbonate. Mates To VP 772F2M-1 And VP 772F2M-1B . SBS Footprint. Each. |
|
VP 772F2R-2 |
Tube Rack For VP 772F2M-1 Magnetic Bead Separator For Use With 15ml
Tubes (16.7mm OD), With 23.5mm Spacing. Clear Polycarbonate. Mates To VP 772F2M-1 And VP 772F2M-1B. SBS
Footprint. Each. |
|
VP 772F2R-3 |
Tube Rack For VP 772F2M-1 Magnetic Bead Separator, For Use With 50ml
Tubes (29mm OD), With 23.5mm Spacing. Clear Polycarbonate. Mates To VP 772F2M-1 And VP 772F2M-1B. SBS Footprint. Each. |
|
VP 772FA |
MAGNETIC BEAD SEPARATOR JIG FOR 250 AND 500 ML BOTTLES, PRICE EACH |
|
VP 772FN-5-5 |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS,
1.58 MM THICK PTFE - SANDWICH STYLE, 5 MM DIAMETER, 10/PKG |
|
VP
772FN-5-5A |
PTFE Flat Pocket Encasing 2 Parylene Coated 3.4mm Diameter NdFeB Magnets
Sandwich Style, 2.27mm Thick, 5.1mm Diameter, 10/pkg |
|
VP 772FN-5-15V |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS
3.38mm IN DIAMETER AND .635mm THICK, V SHAPE, 1.58 MM FLAT PTFE -
SANDWICH STYLE, 5 MM WIDE AND 15 MM LONG, 10/PKG |
|
VP 772FN-5-16R |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS
3.38mm IN DIAMETER AND .635mm THICK, RECTANGULAR SHAPE, 1.58 MM FLAT
PTFE - SANDWICH STYLE, 5 MM WIDE AND 16 MM LONG, 10/PKG |
|
VP 772FN-6-16TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS
3.38mm IN DIAMETER AND .635mm THICK, TUNING FORK SHAPE, 1.58 MM FLAT
PTFE - SANDWICH STYLE, 6.1 MM WIDE AND 16 MM LONG, 10/PKG |
|
VP 772FN-6-16TFP |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS
3.38mm IN DIAMETER AND .635mm THICK, TUNING FORK SHAPE, 1.58 MM FLAT
PTFE - SANDWICH STYLE, 6.1 MM WIDE WITH A PIVOT POINT AND 16 MM LONG
TUNING FORKS WITH WING TIPS, 10/PKG |
|
VP 772FN-6-34MB |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 3.45mm DIAMETER NdFeB
MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 5.45mm WIDE AND 33.9mm LONG,
MAGNETIC BEAD DESIGN PKG OF 10 |
|
VP 772FN-8-8 |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-6 NdFeB DISCS
1.58 MM THICK PTFE - SANDWICH STYLE, 7.9 MM DIAMETER, 10/PKG |
|
VP 772FN42-24-24 |
PTFE Flat Pocket Encasing 2 Parylene Encapsulated VP 782N42-21-HPM Heat
Stable to 150C NdFeB Discs 21.1mm In Diameter And 1.37mm Thick, Disc
Shape, 4.8mm Thick PTFE - Sandwich Style, 24mm Diameter, 10/pkg |
|
VP 772FN-10-35TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 6 MM DIAMETER NdFeB MAGNETS
SANDWICH STYLE ,2.3 MM THICK PLATE, 10 MM WIDE AND 35 MM LONG, WITH
TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON ROUND BOTTOM, PKG OF 10 |
|
VP 772FN-13-13 |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-12 NdFeB DISCS
1.58 MM THICK PTFE - SANDWICH STYLE, 13 MM DIAMETER, 10/PKG |
|
VP 772FN-13-19 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 3.4 MM DIAMETER NdFeB
MAGNETS SANDWICH STYLE ,1.58 MM THICK PLATE, 13 MM WIDE AND 19 MM LONG,
PKG OF 10 |
|
VP 772FN-13-19A |
PTFE Flat Pocket Encasing 4 Parylene Coated 3.4mm Diameter NdFeB Magnets
Sandwich Style, Opposite Polarity For Conventional And Horizontal
Stirrers, 1.58mm Thick Plate, 13mm Wide And 19mm Long. 10/pkg |
|
VP 772FN-13-29TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER NdFeB MAGNETS
SANDWICH STYLE ,2.3 MM THICK PLATE, 13 MM WIDE AND 29 MM LONG, WITH
TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON ROUND BOTTOM, PKG OF 10 |
|
VP 772FN-13-29 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 7mm DIAMETER NdFeB MAGNETS
SANDWICH STYLE, 1.58mm THICK PLATE, 13mm WIDE AND 29mm LONG, PKG OF 10 |
|
VP 772FN-13-29A |
PTFE Flat Pocket Encasing 4 Parylene Coated 3.4mm Diameter NdFeb Magnets
Sandwich Style, Opposite Polarity For Conventional And Horizontal
Stirrers, 1.58mm Thick Plate, 13mm Wide And 19mm Long. 10/pkg |
|
VP 772FN-13-33 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 7mm DIAMETER NdFeB MAGNETS
SANDWICH STYLE, 1.58mm THICK PLATE, 13mm WIDE AND 33mm LONG, PKG OF 10 |
|
VP 772FN-13-67TFP |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 6mm DIAMETER NdFeB MAGNETS
SANDWICH STYLE, 2.3mm THICK PLATE, 13mm WIDE AND 67mm LONG, TUNING FORK
DESIGN PKG OF 10 |
|
VP 772FN-16-30TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER NdFeB MAGNETS
SANDWICH STYLE ,2.3 MM THICK PLATE, 16 MM WIDE AND 30 MM LONG, WITH
TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON FLAT BOTTOM, PKG OF 25 |
|
VP 772FN-17-45 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 12mm DIAMETER NdFeB MAGNETS
SANDWICH STYLE, 1.58mm THICK PLATE, 17mm WIDE AND 45mm LONG, PKG OF 10 |
|
VP 772FN-17-45A |
PTFE Flat Pocket Encasing 4 Parylene Coated 12mm Diameter NdFeB Magnets
Sandwich Style, Opposite Polarity For Conventional And Horizontal
Stirrers, 1.58mm Thick Plate, 17mm Wide And 45mm Long, 10/pkg |
|
VP 772FN-17-64 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 12mm DIAMETER NdFeB MAGNETS
SANDWICH STYLE, 2.3 mm THICK PLATE, 17mm WIDE AND 64mm LONG, LOW PROFILE
STIR ELEMENT PKG OF 10 |
|
VP
772FN-17-64A |
PTFE Flat Pocket Encasing 4 Parylene Coated 12mm Diameter NdFeB Magnets
Sandwich Style, Opposite Polarity For Conventional And Horizontal
Stirrers, 2.3mm Thick Plate, 17mm Wide And 64mm Long, 10/pkg |
|
VP 772FN-24-24 |
PTFE Flat Pocket Encasing 2 Parylene Encapsulated VP 782N-21-PM, Heat
Stable to 80C NdFeB Discs 21.1mm In Diameter And 1.37mm Thick, Disc
Shape, 4.8mm Thick PTFE - Sandwich Style, 24mm Diameter, 10/pkg |
|
VP 772FN-25-55TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12mm DIAMETER NdFeB MAGNETS
SANDWICH STYLE, 2.3mm THICK PLATE, 25mm WIDE AND 55mm LONG, TUNING FORK
DESIGN PKG OF 10 |
|
VP 772FN-25-105MB |
PPTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12mm DIAMETER NdFeB MAGNETS
SANDWICH STYLE, 2.3mm THICK PLATE, 24.8mm WIDE WITH EARS AND 104.7mm
LONG, MAGNETIC BEAD DESIGN PKG OF 10 |
|
VP 772FNU-24 |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS,
1.58 MM THICK PTFE - SANDWICH STYLE, UMBRELLA SHAPE FOR 24 WELL
MICROPLATE, 24/PKG |
|
VP 772FNU-24P |
POLYCARBONATE SUPPORT PLATE WITH 24 HOLES FOR USE WITH VP 772FNU-24
UMBRELLA STIRRERS |
|
VP 772FS-5-5 |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 SmCo DISCS,
1.58 MM THICK PTFE - SANDWICH STYLE, 5 MM DIAMETER, 10/PKG |
|
VP 772FS-5-15V |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782S-3 SmCo DISCS
3.38mm IN DIAMETER AND .635mm THICK, V SHAPE, 1.58mm FLAT PTFE -
SANDWICH STYLE, 5mm WIDE AND 15mm LONG, 10/PKG |
|
VP 772FS-5-16R |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782S-3 SmCo DISCS
3.38mm IN DIAMETER AND .635mm THICK, RECTANGULAR SHAPE, 1.58mm FLAT PTFE
- SANDWICH STYLE, 5mm WIDE AND 16mm LONG, 10/PKG |
|
VP 772FS-6-16TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782S-3 SmCo DISCS
3.38mm IN DIAMETER AND .635mm THICK, TUNING FORK SHAPE, 1.58 MM FLAT
PTFE - SANDWICH STYLE, 6.1 MM WIDE AND 16 MM LONG, 10/PKG |
|
VP 772FS-6-16TFP |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782S-3 SmCo DISCS
3.38mm IN DIAMETER AND .635mm THICK, TUNING FORK SHAPE, 1.58 MM FLAT
PTFE - SANDWICH STYLE, 6.1 MM WIDE WITH A PIVOT POINT AND 16 MM LONG
TUNING FORKS WITH WING TIPS, 10/PKG |
|
VP 772FS-6-34MB |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 3.45mm DIAMETER SmCo MAGNETS
SANDWICH STYLE, 1.58mm THICK PLATE, 5.45mm WIDE AND 33.9mm LONG,
MAGNETIC BEAD DESIGN PKG OF 10 |
|
VP 772FS-8-8 |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED VP 782S-6 SmCo MAGNETS
SANDWICH STYLE 1.58 MM THICK DISC, 7.9 MM DIAMETER, PKG OF 10 |
|
VP 772FS-10-35TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 6 MM DIAMETER SmCo MAGNETS
SANDWICH STYLE ,2.3 MM THICK PLATE, 10 MM WIDE AND 35 MM LONG, WITH
TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON ROUND BOTTOM, PKG OF 10 |
|
VP 772FS-13-13 |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED VP 782S-12 SmCo MAGNETS
SANDWICH STYLE ,1.58 MM THICK DISC, 13.1 MM DIAMETER, PKG OF 10 |
|
VP 772FS-13-19 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 3.4mm DIAMETER SmCo MAGNETS
SANDWICH STYLE, 1.58mm THICK PLATE, 13mm WIDE AND 19mm LONG, PKG OF 10 |
|
VP 772FS-13-19A |
PTFE Flat Pocket Encasing 4 Parylene Coated 3.4mm Diameter SmCo Magnets
Sandwich Style, Opposite Polarity For Conventional And Horizontal
Stirrers, 1.58mm Thick Plate, 13mm Wide And 19mm Long. 10/pkg |
|
VP 772FS-13-29 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 7 MM DIAMETER SmCo MAGNETS
SANDWICH STYLE ,1.58 MM THICK PLATE, 13 MM WIDE AND 29 MM LONG, PKG OF
10 |
|
VP 772FS-13-29A |
PTFE Flat Pocket Encasing 4 Parylene Coated 3.4mm Diameter SmCo Magnets
Sandwich Style, Opposite Polarity For Conventional And Horizontal
Stirrers, 1.58mm Thick Plate, 13mm Wide And 19mm Long. 10/pkg |
|
VP 772FS-13-29TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER SmCo MAGNETS
SANDWICH STYLE ,2.3 MM THICK PLATE, 13 MM WIDE AND 29 MM LONG, WITH
TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON BOTTOM PKG OF 10 |
|
VP 772FS-13-33 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 7 MM DIAMETER SmCo MAGNETS
SANDWICH STYLE ,1.58 MM THICK PLATE, 13 MM WIDE AND 33 MM LONG, PKG OF
10 |
|
VP 772FS-13-67TFP |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 6mm DIAMETER SmCo MAGNETS
SANDWICH STYLE, 2.3mm THICK PLATE, 13mm WIDE AND 67mm LONG, TUNING FORK
DESIGN PKG OF 10 |
|
VP 772FS-16-30TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER SmCo MAGNETS
SANDWICH STYLE ,2.3 MM THICK PLATE, 16 MM WIDE AND 30 MM LONG, WITH
TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON FLAT BOTTOM, PKG OF 10 |
|
VP 772FS-17-45 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 12 MM DIAMETER SmCo MAGNETS
SANDWICH STYLE ,1.58 MM THICK PLATE, 17 MM WIDE AND 45 MM LONG, PKG OF
10 |
|
VP 772FS-17-45A |
PTFE Flat Pocket Encasing 4 Parylene Coated 12mm Diameter SmCo Magnets
Sandwich Style, Opposite Polarity For Conventional And Horizontal
Stirrers, 1.58mm Thick Plate, 17mm Wide And 45mm Long, 10/pkg |
|
VP 772FS-24-24 |
PTFE Flat Pocket Encasing 4 Parylene Coated VP 782S-21 SmCo Magnets
Sandwich Style 4.8mm Thick Disc, 24.1mm Diameter, 10/pkg |
|
VP 772FS-25-55TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER SmCo MAGNETS
(VP 782S-12) SANDWICH STYLE ,2.3 MM THICK PLATE, 25 MM WIDE AND 55 MM
LONG, TUNING FORK DESIGN PKG OF 10 |
|
VP 772FS-25-105MB |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12mm DIAMETER Sm Co MAGNETS
SANDWICH STYLE, 2.3mm THICK PLATE, 24.8mm WIDE WITH EARS AND 104.7mm
LONG, MAGNETIC BEAD DESIGN PKG OF 10 |
|
VP
772FSU-24 |
VP 772FSU-24 PTFE Flat Pocket Encasing 2 Parylene Encapsulated
VP 782S-3 SmCo Discs, 1.58mm Thick PTFE - Sandwich Style,
Umbrella Shape For 24 Well Microplate, 24/pkg |
|
VP 772PT-6-19 |
Magnetic Stir Bar - 6.35mm Diameter, 19.1mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature
Magnet. 10/Pkg. |
|
VP 772PT-6-19-150 |
Magnetic Stir Bar - 6.35mm Diameter, 19.1mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating
Temperature Magnet. 10/Pkg. |
|
VP 772PT-6-25 |
Magnetic Stir Bar - 6.35mm Diameter, 25.3mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature
Magnet. 10/Pkg. |
|
VP 772PT-6-25-150 |
Magnetic Stir Bar - 6.35mm Diameter, 25.3mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating
Temperature Magnet. 10/Pkg. |
|
VP 772PT-6-32 |
Magnetic Stir Bar - 6.35mm Diameter, 31.6mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature
Magnet. 10/Pkg. |
|
VP 772PT-6-32-150 |
Magnetic Stir Bar - 6.35mm Diameter, 31.6mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating
Temperature Magnet. 10/Pkg. |
|
VP 772PT-6-38 |
Magnetic Stir Bar - 6.35mm Diameter, 37.8mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature
Magnet. 10/Pkg. |
|
VP 772PT-6-38-150 |
Magnetic Stir Bar - 6.35mm Diameter, 37.8mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating
Temperature Magnet. 10/Pkg. |
|
VP 772PT-6-44 |
Magnetic Stir Bar - 6.35mm Diameter, 44.1mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature
Magnet. 10/Pkg. |
|
VP 772PT-6-44-150 |
Magnetic Stir Bar - 6.35mm Diameter, 44.1mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating
Temperature Magnet. 10/Pkg. |
|
VP 772PT-6-51 |
Magnetic Stir Bar - 6.35mm Diameter, 50.3mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature
Magnet. 10/Pkg. |
|
VP 772PT-6-51-150 |
Magnetic Stir Bar - 6.35mm Diameter, 50.3mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating
Temperature Magnet. 10/Pkg. |
|
VP 772PT-6-57 |
Magnetic Stir Bar - 6.35mm Diameter, 56.6mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature
Magnet. 10/Pkg. |
|
VP 772PT-6-57-150 |
Magnetic Stir Bar - 6.35mm Diameter, 56.6mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating
Temperature Magnet. 10/Pkg. |
|
VP 772PT-6-63 |
Magnetic Stir Bar - 6.35mm Diameter, 62.8mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature
Magnet. 10/Pkg. |
|
VP 772PT-6-63-150 |
Magnetic Stir Bar - 6.35mm Diameter, 62.8mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating
Temperature Magnet. 10/Pkg. |
|
VP 772PT-13-41 |
Magnetic Stir Bar - 12.7mm Diameter, 41.4mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC- 8- 13, NdFeB (48 MGO), 80C Maximum Operating Temperature
Magnet. 10/Pkg. |
|
VP 772PT-13-41-150 |
Magnetic Stir Bar - 12.7mm Diameter, 41.4mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-8-13-150, NdFeB (42 MGO), 150C Maximum Operating
Temperature Magnet. 10/Pkg. |
|
VP 772PT-13-54 |
Magnetic Stir Bar - 12.7mm Diameter, 54.2mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC- 8- 13, NdFeB (48 MGO), 80C Maximum Operating Temperature
Magnet. 10/Pkg. |
|
VP 772PT-13-54-150 |
Magnetic Stir Bar - 12.7mm Diameter, 54.2mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-8-13-150, NdFeB (42 MGO), 150C Maximum Operating
Temperature Magnet. 10/Pkg. |
|
VP 772PT-13-67 |
Magnetic Stir Bar - 12.7mm Diameter, 67.1mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC- 8- 13, NdFeB (48 MGO), 80C Maximum Operating Temperature
Magnet. 10/Pkg. |
|
VP 772PT-13-67-150 |
Magnetic Stir Bar - 12.7mm Diameter, 67.1mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-8-13-150, NdFeB (42 MGO), 150C Maximum Operating
Temperature Magnet. 10/Pkg. |
|
VP 772PT-13-80 |
Magnetic Stir Bar - 12.7mm Diameter, 79.9mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC- 8- 13, NdFeB (48 MGO), 80C Maximum Operating Temperature
Magnet. 10/Pkg. |
|
VP 772PT-13-80-150 |
Magnetic Stir Bar - 12.7mm Diameter, 79.9mm Long. PEEK Tube
Capped With Polypropylene Set Screws Encasing Parylene Coated VP
782NC-8-13-150, NdFeB (42 MGO), 150C Maximum Operating
Temperature Magnet. 10/Pkg. |
|
VP
772PT-25-80OV-150 |
Oval Shaped Black PEEK Stir Element, 25.4mm In Diameter And 80mm Long,
Turned Down To Oval Shape, With Spin Ring In The Middle. Contains 4 VP
782NC-8-13-150 Magnets And 2 Polypropylene Set Screws, 1/pkg |
|
VP 772T-6-11 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 10.7 MM LONG, PKG OF 10 |
|
VP 772T-6-15 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 15.1 MM LONG, PKG OF 10 |
|
VP 772T-6-22 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 21.7 MM LONG, PKG OF 10 |
|
VP 772T-6-28 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 27.7MM LONG, PKG OF 10 |
|
VP 772T-6-34 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 34.2 MM LONG, PKG OF 10 |
|
VP 772T-6-41 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 41.4 MM LONG, PKG OF 10 |
|
VP 772T-6-48 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 47.6 MM LONG, PKG OF 10 |
|
VP 772T-6-54 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 53.8 MM LONG, PKG OF 10 |
|
VP 772T-6-61 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 60.8 MM LONG, PKG OF 10 |
|
VP 772T-6-68 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 67.5 MM LONG, PKG OF 10 |
|
VP 772T-6-74 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 74.2 MM LONG, PKG OF 10 |
|
VP 772T-6-81 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 80.3MM LONG, PKG OF 10 |
|
VP 772T-6-87 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35
MM DIAMETER, 87.2MM LONG, PKG OF 10 |
|
VP 772T-11-16 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4
MM DIAMETER, 16MM LONG, PKG OF 10 |
|
VP 772T-11-19 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4
MM DIAMETER, 19MM LONG, PKG OF 10 |
|
VP 772T-11-28 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4
MM DIAMETER, 27.9MM LONG, PKG OF 10 |
|
VP 772T-11-32 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4
MM DIAMETER, 32MM LONG, PKG OF 10 |
|
VP 772T-11-34 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4
MM DIAMETER, 34MM LONG, PKG OF 10 |
|
VP 772T-11-41 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4
MM DIAMETER, 40.6MM LONG, PKG OF 10 |
|
VP 772T-11-47 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4
MM DIAMETER, 47MM LONG, PKG OF 10 |
|
VP 772T-11-54 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4
MM DIAMETER, 53.5MM LONG, PKG OF 10 |
|
VP 772T-11-67 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4
MM DIAMETER, 66.6MM LONG, PKG OF 10 |
|
VP 773-10 |
STIR CROSS, 10mm DIAMETER X 5mm THICK, PTFE ENCAPSULATED ALNICO MAGNET,
PKG OF 10 |
|
VP 773-19 |
STIR CROSS, PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 19mm DIAMETER
X 8mm THICK, 10/PKG |
|
VP 773D-9 |
STIR DISC CROSS, 9mm DIAMETER X 6mm THICK, PTFE ENCAPSULATED ALNICO
MAGNET, 10/PKG |
|
VP 773D-10 |
STIR DISC CROSS, 10mm DIAMETER X 6mm THICK, PTFE ENCAPSULATED ALNICO
MAGNET, PKG OF 10 |
|
VP 773D-20 |
STIR DISC CROSS, 20mm DIAMETER X 10mm thick, PTFE ENCAPSULATED ALNICO
MAGNET, PKG OF 10 |
|
VP 773DC-10 |
STIR DOUBLE CROSS HEAD, 10mm DIAMETER X 8mm THICK, PTFE ENCAPSULATED
ALNICO MAGNET, PKG OF 10 |
|
VP 773DC-14 |
STIR DOUBLE CROSS HEAD, 14mm DIAMETER X 10mm THICK, PTFE ENCAPSULATED
ALNICO MAGNET, PKG OF 10 |
|
VP 773I-9 |
INVERTED CROSS CUVETTE STIRRER, 9 MM DIAMETER X 8.3 MM TALL, PTFE
ENCAPSULATED ALNICO MAGNET, 10/PKG |
|
VP 773W-5,9 |
WING STIRRER, 5.4mm WIDE AND 9.2mm TALL, PTFE ENCAPSULATED ALNICO
MAGNET, PACKAGE OF 10 |
|
VP 773W-8,11 |
WING STIRRER, 8 MM WIDE AND 11 MM TALL, PTFE ENCAPSULATED ALNICO MAGNET,
PACKAGE OF 10 |
|
VP 773W-10,16 |
WING STIRRER, 10mm WIDE AND 16mm TALL, PTFE ENCAPSULATED ALNICO MAGNET,
PACKAGE OF 10 |
|
VP 773W-13,13 |
WING STIRRER, 13mm WIDE AND 13mm TALL, PTFE ENCAPSULATED ALNICO MAGNET,
PACKAGE OF 10 |
|
VP 773W-13,22 |
WING STIRRER, 13mm WIDE AND 22mm TALL, PTFE ENCAPSULATED ALNICO MAGNET,
PACKAGE OF 10 |
|
VP 774-2 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 2 MM LONG X 2 MM
DIAMETER, 10/PKG |
|
VP 774-5 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 5 MM LONG X 2 MM
DIAMETER, 10/PKG |
|
VP 774-7 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 7 MM LONG X 2 MM
DIAMETER, 10/PKG |
|
VP 774-8 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 8 MM LONG X 1.5 MM
DIAMETER, 10/PKG |
|
VP 774-15 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 15 MM LONG X 1.5 MM
DIAMETER, 10/PKG |
|
VP 775-A |
AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 775-6, VP 775-8, VP 775-10
AND VP 775-12 PTFE MAGNETIC STIR BARS INTO 48 TEST TUBES (12 mm
DIAMETER, 75 mm LONG ON 14 mm CENTERS), INCLUDES VP 771 |
|
VP 775-3 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 3 MM LONG X 3 MM
DIAMETER, 10/PKG |
|
VP 775-6 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 6 MM LONG X 3 MM
DIAMETER, 10/PKG |
|
VP 775-8 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 8 MM LONG X 3 MM
DIAMETER, 10/PKG |
|
VP 775-10 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 10 MM LONG X 3 MM
DIAMETER, 10/PKG |
|
VP 775-12 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 12 MM LONG X 3 MM
DIAMETER, 100/PKG |
|
VP 775-13 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 13 MM LONG X 3 MM
DIAMETER, 10/PKG |
|
VP 775-20 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 20 MM LONG X 3 MM
DIAMETER, 10/PKG |
|
VP 775-30 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 30 MM LONG X 3 MM
DIAMETER, 10/PKG |
|
VP 775-35 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (SAMARIUM COBALT) 35 MM LONG
X 3 MM DIAMETER, 10/PKG |
|
VP 776-15 |
OVAL PTFE ENCAPSULATED ALNICO MAGNET, 15mm X 6mm, 10/PKG |
|
VP 776-25 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 25 MM LONG X 8 MM
DIAMETER, 10/PKG |
|
VP 776-40 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 40 MM LONG X 8 MM
DIAMETER, 10/PKG |
|
VP 776-50 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 50 MM LONG X 8 MM
DIAMETER, 10/PKG |
|
VP 777-30 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (RARE EARTH) 30 MM LONG X 6
MM DIAMETER, 10/PKG |
|
VP 777-38 |
OCTAHEDRAL PTFE ENCAPSULATED MAGNETIC STIR BARS (RARE EARTH) 38 MM LONG
X 8 MM DIAMETER, 10/PKG |
|
VP 777-40 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (RARE EARTH) 40 MM LONG X 8
MM DIAMETER, 10/PKG |
|
VP 777-51 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (RARE EARTH) 51 MM LONG X 8
MM DIAMETER, 10/PKG |
|
VP 777OV-64 |
OVAL RARE EARTH PTFE ENCAPSULATED MAGNETIC STIR BARS 64 MM LONG X 20 MM
DIAMETER, 10/PKG |
|
VP 778-12 |
SQUARE PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 12 MM LONG X 4 MM X
4 MM, 100/PKG |
|
VP 778-25 |
SQUARE PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 25 MM LONG X 5.5 MM
X 5.5 MM, 10/PKG |
|
VP 778-35 |
SQUARE PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 35 MM LONG X 6 MM X
6 MM, 100/PKG |
|
VP 778-50 |
SQUARE PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 50 MM LONG X 7.5 MM
X 7.5 MM, 10/PKG |
|
VP
779-5 |
DISC, PTFE ENCAPSULATED MAGNETIC STIR DISCS (SAMARIUM COBALT)
5 MM
DIAMETER X 1.8 THICK, 12/PKG |
|
VP 779-5A |
DROP DISPENSER - 96 HOLES FOR VP 772FN5-5 AND VP 772FS5-5 PTFE STIR
DISCS, SYSTEM INCLUDES A VP 770C MAGNETIC LOADING BLOCK |
|
VP 779-6 |
DISC, NICKEL COATED MAGNETIC STIR DISCS (SAMARIUM COBALT) 6.3 MM
DIAMETER X 2.5 MM THICK, 10/PKG |
|
VP 779-13 |
DISC, PTFE ENCAPSULATED MAGNETIC STIR DISCS (SAMARIUM COBALT) 13 MM
DIAMETER X 1.7 THICK, 10/PKG |
|
VP 781 |
DEMAGNETIZER - 9" x 4-5/8" x 3-3/8" - POLE AREA OF 6 SQUARE INCHES,120
Volts |
|
VP 781A |
DEMAGNETIZER, 230 VOLTS OR 120 VOLTS |
|
VP 782NC-2-6 |
NDFEB (48MGO) MAGNETIC
TUMBLE STIR CYLINDERS, DIAMETER 2.15MM X 6.44MM. COATED WITH 0.05MM
THICK PARYLENE, 10/PKG |
|
VP 782NC-3-6 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR CYLINDERS, 3.19mm IN DIAMETER AND
6.45mm LONG, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
|
VP 782NC-3-6R |
STIR BAR RETRIEVER WITH 2.36 MM DIAMETER STAINLESS STEEL BAR 127 MM LONG
COUPLED TO A VP 782NC-3-6 |
|
VP 782NC-8-13 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR CYLINDERS, 7.95mm IN DIAMETER AND
12.8mm LONG, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
|
VP 782N-3 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR DISCS, 3.4mm IN DIAMETER AND .73mm
THICK, COATED WITH 0.05mm THICK PARYLENE, 100/PKG |
|
VP 782N-6 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR DISCS, 6.4mm IN DIAMETER AND .73mm
THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
|
VP 782N-12 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR DISCS, 11.5mm IN DIAMETER AND .73mm
THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
|
VP 782N-21 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR DISCS, 21.18mm IN DIAMETER AND 1.37mm
THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
|
VP 782S-3 |
SmCo17 MAGNETIC TUMBLE STIR DISCS, 3.4 mm IN DIAMETER AND .73mm THICK,
COATED WITH 0.05mm THICK PARYLENE, 100/PKG |
|
VP 782S-6 |
SmCo17 MAGNETIC TUMBLE STIR DISCS, 6.4 mm IN DIAMETER AND .73mm THICK,
COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
|
VP 782S-12 |
SmCo17 MAGNETIC TUMBLE STIR DISCS, 11.5 mm IN DIAMETER AND .73mm THICK,
COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
|
VP 782S-21 |
SmCo17 MAGNETIC TUMBLE STIR DISCS, 21.18 mm IN DIAMETER AND .73mm THICK,
COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
|
VP 783NS-3-3-3 |
NdFeB (42MGO) MAGNETIC TUMBLE STIR CUBE, 3.2MM X 3.2MM X 3.2MM),
MAGNETIZED THROUGH THE LENGTH, NICKEL COATED, 100/PKG |
|
VP 783NC-3-6 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR CYLINDER, 3.0MM DIAMETER X 6.3MM
LONG, MAGNETIZED THROUGH THE LENGTH, NICKEL COATED, 10/PKG |
|
VP 783NC-3.5-6 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR CYLINDER, 3.5MM DIAMETER X 6.3MM
LONG, MAGNETIZED THROUGH THE DIAMETER, NICKEL COATED, 10/PKG |
|
VP 783NC-6-9 |
NdFeB (42MGO)MAGNETIC TUMBLE STIR CYLINDER, 6.4mm DIAMETER, 9.5mm LONG,
MAGNETIZED THROUGH THE LENGTH, NICKEL COATED, 10/PKG |
|
VP 790 |
CYBIO/MATRIX SLIDING PADDLE MIXER |
|
VP 791-24 |
TRAPEZE STIRRER FOR 24 VIAL RACK |
|
VP 791-96 |
TRAPEZE STIRRER FOR 96 WELL MICROPLATE |
|
VP 791PN42-42-32 |
Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of
Container. PTFE Suspension System (41.7mm Wide, 31.7mm Tall), 150C Maximum
Operating Temperature NdFeB (42 MGO) Magnet. Priced Each. |
|
VP 791PN42-42-43 |
Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of
Container. PTFE Suspension System (41.7mm Wide, 43.3mm Tall), 150C Maximum
Operating Temperature NdFeB (42 MGO) Magnet. Priced Each. |
|
VP 791PN48-42-32 |
Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of
Container. PTFE Suspension System (41.7mm Wide, 31.7mm Tall), 80C Maximum
Operating Temperature NdFeB (48 MGO) Magnet. Priced Each. |
|
VP 791PN48-42-43 |
Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of
Container. PTFE Suspension System (41.7mm Wide, 43.3mm Tall), 80C Maximum
Operating Temperature NdFeB (48 MGO) Magnet. Priced Each. |
|
VP 791PS29-42-32 |
Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of
Container. PTFE Suspension System (41.7mm Wide, 31.7mm Tall), 80C Maximum
Operating Temperature SmCo (29 MGO) Magnet. Priced Each |
|
VP 791PS29-42-43 |
Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom
Of Container. PTFE Suspension System (41.7mm Wide, 43.3mm Tall), 80C
Maximum Operating Temperature SmCo (29 MGO) Magnet. Priced Each |
|
VP 792A |
MAGNETIC BLOCKS AND SUPPORTS FOR DISPOSABLE CYBIO MOVING PADDLE MIXER,
EACH SYSTEM |
|
VP 792B |
BUBBLE PADDLE STIRRER WITH MAGNETIC CLUTCHES FOR DISPOSABLE CYBIO MOVING
PADDLE MIXER, EACH |
|
VP 792C |
MAGNETIC RETAINER FOR DISPOSABLE CYBIO MOVING PADDLE MIXER, EACH |
|
VP 792D |
DISPOSABLE NALGENE POLYPROPYLENE RESERVOIRS NALGENE #1300-1301, 300 ML
VOLUME, 128 MM X 86 MM X 43 MM, STERILE CASE OF 40 |
|
VP 792D-1 |
POLYPROPYLENE DETACHABLE OUTLET PORT FOR USE WITH REAGENT RESERVOIRS.
CAN BE USED WITH VP BUBBLE PADDLE RESERVOIRS AND AS AN ACCESSORY WITH
THE VP 600 SERIES LIQUID LEVEL SENSOR. COMPATIBLE WITH VP 792D |
|
VP 793 |
MAGPICK1™ MAGNETIC TOOL FOR SEPARATION WITH 1 MAGNET 2.8mm DIAMETER |
|
VP 801 |
PTFE SANDWICH STEEPLE STIRRER, 5.6 MM WIDE, BY 15 MM TALL AND 1.58 MM
THICK WITH TWO OPPOSING POCKETS 3.55 MM DIAMETER AND .069 MM DEEP |
|
VP 836A |
REGISTRATION FRAME SYSTEM FOR 1536 PIN REPLICATOR |
|
VP 838 |
REPLICATOR - 1536 PIN - 0.457mm DIAMETER - DELIVERS ~20nl |
|
VP 838FP1 |
1536 FLOATING TUBE PIN REPLICATOR - 0.457mm PIN DIAMETER, 17mm LONG,
DELIVERS ~20nl |
|
VP 838FP3 |
1536 FLOATING TUBE PIN REPLICATOR - 0.787mm PIN DIAMETER, 17mm LONG -
DELIVERS ~80nl |
|
VP 838FP4 |
FLOATING PIN REPLICATOR - 1536 PINS - 0.914mm DIAMETER, 17.4mm LONG,
DELIVERS ~110nl |
|
VP 838FP8 |
FLOATING PIN REPLICATOR - 1536 PINS - 0.356mm DIAMETER, 17.4mm LONG,
DELIVERS ~12nl |
|
VP 838FP9 |
1536 FLOATING TUBE PIN REPLICATOR - 0.229mm PIN DIAMETER, 17mm LONG -
DELIVERS ~4nl |
|
VP 881 |
LIBRARY COPIER - FOR 1536 GREINER MICROPLATES |
|
VP 881A |
LIBRARY COPIER - FOR 1536 CORNING COSTAR MICROPLATES |
|
VP 882 |
LIBRARY COPIER - FOR GLASS PLATES AND NYLON MEMBRANES |
|
VP 903R-1536 |
PIN TOOL, PIPET TIP, AND MANIFOLD REGISTRATION TARGET PLATE FOR 1536
WELL MICROPLATES |
|
VP 903R-384 |
PIN TOOL, PIPET TIP, AND MANIFOLD REGISTRATION TARGET PLATE FOR 384 WELL
MICROPLATES |
|
VP 903R-96 |
PIN TOOL, PIPET TIP, AND MANIFOLD REGISTRATION TARGET PLATE FOR 96 WELL
MICROPLATES |
|
VP 904 |
PIN TOOL DRYER, 110 VOLTS AC. PIN TOOL ACTIVATING SWITCH AND VP 581B
LOCATING FEATURE. |
|
VP 920 |
TWISTER I PLATE HANDLER/STACKER (USED SYSTEM) 3 AXIS ROBOT WITH GRIPPER
AND TWO 20 PLATE STACKERS |
|
VP 920A |
EXTENDED CAPACITY STACKERS FOR TWISTER I, (USED SYSTEM) THREE 20 PLATE
STACKERS |
|
VP OK7 |
REPLICATOR STARTER KIT |
|
VP OK8 |
SEAL & FREEZE STARTER KIT |
|
VP OK9 |
DEEP WELL REPLICATOR STARTER KIT |
|
VP OK9A |
GROOVED DEEP WELL REPLICATOR STARTER KIT |
|
VP OK10 |
VICKI REGISTRATION STARTER KIT |
|
VP
OK11 |
FU-MEEI REGISTRATION STARTER KIT |
|
VP OK12 |
MEMBRANE MACROARRAY STARTER KIT FOR 96 WELL MICROPLATES |
|
VP OK13 |
MEMBRANE MACROARRAY STARTER KIT FOR 384 WELL MICROPLATES |
|
VP
OK14 |
BASIC MEMBRANE MACROARRAY STARTER KIT FOR FIXED PIN & E-CLIP REPLICATORS |
|
VP OK14A |
BASIC MEMBRANE MACROARRAY STARTER KIT FOR FP SERIES REPLICATORS |
|
VP OK15 |
ROBOT DUAL COMBINATION WASH AND BLOT KIT FOR 96 PIN TOOLS |
|
VP OK15PE |
PERKIN ELMER ROBOT DUAL COMBINATION WASH AND BLOT KIT FOR 96 PIN TOOLS |
|
VP OK16 |
ROBOT DUAL COMBINATION WASH AND BLOT KIT FOR 384 PIN TOOLS |
|
VP OK16PE |
PERKIN ELMER ROBOT DUAL COMBINATION WASH AND BLOT KIT FOR 384 PIN TOOLS |
|
VP OK17 |
STANDARD ROBOT PIN TOOL ACCESSORY KIT |
|
VP OK18 |
ROBOT HOT SWAPABLE PIN TOOL ACCESSORY KIT |
|
VP OK19 |
ROBOT LOW PROFILE PIN TOOL ACCESSORY KIT |
|
VP OK20 |
PERKIN ELMER ROBOT PIN TOOL ACCESSORY KIT |
|
VP OK21 |
SPA STIRRING SYSTEM FOR 96 PIPETTOR |
|
VP OK22 |
SPA STIRRING SYSTEM FOR 96 PIPETTOR, CE VERSION |
|
|
Prices and Terms
Phone (800) 455-0644 or e-mail
us at sales@VP-Scientific.com for current pricing.
|
|
|
| |
|
|
|
|
|
